binding-characterization skill
✓ VerifiedProvides guidance for planning, troubleshooting, and interpreting binding kinetics experiments using Surface Plasmon Resonance and Biolayer Interferometry.
- GitHub stars
- 173
- Files
- 1
- Last commit
- Jun 11, 2026
- License
- MIT
- Allowed tools
- —
What does the binding-characterization skill do?
binding-characterization provides guidance for planning, troubleshooting, and interpreting binding kinetics experiments using Surface Plasmon Resonance and Biolayer Interferometry.
Summary generated from the skill's SKILL.md.
About the binding-characterization skill
Scientists planning or troubleshooting biomolecular interaction studies can use this skill to optimize Surface Plasmon Resonance (SPR) and Biolayer Interferometry (BLI) experiments. It provides technical guidance for selecting the appropriate platform based on sample purity, throughput requirements, and analyte size. For instance, it helps decide between the high sensitivity of SPR for small molecules and the high-throughput capabilities of BLI for large complexes or crude lysates.
When experiments fail to produce expected results, the skill offers specific solutions for common issues like hydrophobic adsorption, aggregation, or mass transport limitations. It includes detailed protocols for buffer additives such as BSA and Tween-20, pH optimization strategies, and regeneration scouting using reagents like Glycine or NaCl. Researchers can also use it to interpret kinetic data artifacts, such as biphasic binding or the hook effect, ensuring that fitted parameters like kon and koff remain reliable and accurate.
What an agent can do with it
- 1Select an experimental platformDetermine whether to use SPR or BLI based on your specific sample and throughput needs.
- 2Troubleshoot binding signal failuresIdentify why an experiment might show no binding in SPR but works in BLI, or vice versa.
- 3Mitigate mass transport limitationsApply strategies to prevent diffusion issues from distorting your kinetic parameters.
- 4Optimize surface regenerationFind the correct chemical conditions to strip analytes from a chip without damaging the ligand.
- 5Reduce nonspecific bindingSelect the most effective buffer additives to prevent unwanted interactions with the sensor surface.
Written from the skill's SKILL.md. Every use case is checked against a quote from it.
How to install the binding-characterization skill
Each command copies the skill folder into the client's skills directory. Restart the client or start a new session to load it.Install the binding-characterization skill in Plugin
/plugin marketplace add adaptyvbio/protein-design-skills /plugin install adaptyv@protein-design-skills
Install the binding-characterization skill in Claude Code
~/.claude/skills/binding-characterization/SKILL.md
$ npx degit adaptyvbio/protein-design-skills/skills/binding-characterization ~/.claude/skills/binding-characterizationInstall the binding-characterization skill in Claude Code (project)
.claude/skills/binding-characterization/SKILL.md
$ npx degit adaptyvbio/protein-design-skills/skills/binding-characterization .claude/skills/binding-characterizationInstall the binding-characterization skill in Codex
~/.agents/skills/binding-characterization/SKILL.md
$ npx degit adaptyvbio/protein-design-skills/skills/binding-characterization ~/.agents/skills/binding-characterizationInstall the binding-characterization skill in Gemini CLI
~/.gemini/skills/binding-characterization/SKILL.md
$ npx degit adaptyvbio/protein-design-skills/skills/binding-characterization ~/.gemini/skills/binding-characterizationInstall the binding-characterization skill in Claude.ai
npx degit adaptyvbio/protein-design-skills/skills/binding-characterization binding-characterization && zip -r binding-characterization.zip binding-characterization # claude.ai → Customize → Skills → + → Create skill → Upload a skill → binding-characterization.zip
Automated checks
Ran Nov 16, 2026Full report →Passed our automated checks. That is not a security audit: read the scripts before you let an agent run them. How checks work
- Source repository linked and reachableadaptyvbio/protein-design-skills/skills/binding-characterization is public and reachablegithub.com/adaptyvbio/protein-design-skills/tree/HEAD/skills ↗Pass
- Open source license (OSI)MITspdx.org/licenses/MIT.html ↗Pass
- Commit or release in the last yearLast commit 2026-06-11github.com/adaptyvbio/protein-design-skills/commits ↗Pass
- No download-and-run or credential theft in scriptsNo scripts in the skill folderPass
- No hidden instructions in SKILL.mdNo override phrases, safeguard switches, credential requests or hidden charactersgithub.com/adaptyvbio/protein-design-skills/blob/HEAD/skills ↗Pass
- Pre-approved tools are scopedNo pre-approved tools; the agent asks before using onegithub.com/adaptyvbio/protein-design-skills/blob/HEAD/skills ↗Pass
- SKILL.md follows the Agent Skills formatValid name and description; says when to use it; 235 linesgithub.com/adaptyvbio/protein-design-skills/blob/HEAD/skills ↗Pass
SKILL.md
View on GitHubBinding Characterization: SPR and BLI
SPR vs BLI Decision Matrix
| Factor | Choose SPR | Choose BLI |
|---|---|---|
| Sensitivity | Small molecules, fragments (<500 Da) | Large complexes, antibodies |
| Throughput | Low-medium (serial) | High (96-well parallel) |
| Sample purity | Required (clogs fluidics) | Tolerates crude lysates |
| Kinetic resolution | Higher (better for fast kinetics) | Lower |
| Mass transport | More sensitive (may distort kon) | Less sensitive |
| Maintenance | High (fluidics system) | Low (dip-and-read) |
| Sample consumption | Higher (continuous flow) | Lower |
| Cost per experiment | Lower chip cost, higher run cost | Higher tip cost, lower run cost |
Key differences
SPR (Surface Plasmon Resonance)
- Mechanism: Detects refractive index changes at gold surface
- Surface: Gold chip with dextran matrix (CM5, CM7, etc.)
- Flow: Continuous microfluidics
- Best for: Small molecules, high-affinity, precise kon/koff
BLI (Biolayer Interferometry)
- Mechanism: Measures optical interference pattern shift
- Surface: Fiber optic biosensor tips (SA, Ni-NTA, AHC)
- Flow: Dip-and-read (no microfluidics)
- Best for: High-throughput, crude samples, antibody screening
Troubleshooting: Why BLI works but SPR doesn't
| Cause | Mechanism | Solution |
|---|---|---|
| Hydrophobic CDRs | Adsorb to SPR gold/dextran surface | Add 0.05% Tween-20, use CM7 chip with longer dextran |
| Aggregation | Mass transport artifacts in SPR fluidics | Filter sample (0.22μm), reduce ligand density |
| High instability | Degrades during continuous flow | Shorter cycle time, add stabilizers (trehalose 5%) |
| Charge mismatch | Nonspecific binding to charged dextran | Adjust buffer pH ±1 from pI, add BSA 1mg/mL |
| Slow dissociation | Long regeneration needed (damages ligand) | Use BLI (disposable tips) |
Why SPR works but BLI doesn't
| Cause | Mechanism | Solution |
|---|---|---|
| Small analyte | BLI less sensitive for <10 kDa | Use SPR with appropriate chip |
| Weak affinity (KD >10μM) | Fast dissociation in BLI dip | Increase analyte concentration |
| Low expression | Not enough signal | Increase biosensor loading |
Mass transport considerations
Mass transport limitation occurs when analyte cannot diffuse to the surface fast enough to maintain equilibrium. This distorts kinetic parameters.
Symptoms
- Observed kon appears slower than true kon
- Linear association phase (instead of exponential)
- kon varies with ligand density
- Rmax varies with flow rate
When mass transport matters
- High-affinity interactions (kon >10^6 M^-1s^-1)
- High ligand density (>500 RU)
- Slow flow rates (<30 μL/min in SPR)
- Large analytes (slow diffusion)
Mitigation strategies
| Strategy | SPR | BLI |
|---|---|---|
| Reduce ligand density | <200 RU for high-affinity | <0.5 nm shift loading |
| Increase flow rate | 50-100 μL/min | Increase shake speed (1000 rpm) |
| Use oriented immobilization | His-tag capture | Biotinylated ligand |
| Include in fitting | Mass transport model (kt) | Usually less critical |
Nonspecific binding mitigation
Buffer additives (ranked by effectiveness)
| Additive | Concentration | Mechanism | Best For |
|---|---|---|---|
| BSA | 0.5-1 mg/mL | Blocks hydrophobic sites | General use |
| Tween-20 | 0.02-0.05% | Prevents surface adsorption | Hydrophobic analytes |
| Trehalose | 1-5% | Stabilizes + blocks | Unstable proteins |
| Sucrose | 5% | BLI-specific blocker | BLI tips |
| Carboxymethyl dextran | 1 mg/mL | Competitive blocking | SPR with charged proteins |
| NaCl | 150-500 mM | Reduces ionic interactions | Charged proteins |
pH optimization
- Keep buffer pH at least 1 unit away from analyte pI
- pI near 7: Use pH 6.0 or 8.0 buffer
- Acidic proteins (pI <5): Use neutral or basic buffer
- Basic proteins (pI >9): Use slightly acidic buffer
Reference subtraction
Always include:
- Blank reference channel (no ligand)
- Buffer-only injections
- Non-specific binding controls
Regeneration conditions
SPR regeneration scouting (try in order)
| Condition | Targets | Caution |
|---|---|---|
| 10 mM Glycine pH 2.0-2.5 | Most protein-protein | May denature ligand |
| 10 mM Glycine pH 1.5 | Strong interactions | Harsh, limit exposure |
| 1-2 M NaCl | Ionic interactions | Mild, try first |
| 10 mM NaOH | Very stable ligands | Can hydrolyze proteins |
| 10 mM Glycine pH 9-10 | Acid-stable proteins | Can aggregate |
| 10 mM EDTA | His-tag, metal-dependent | Strips Ni-NTA |
| 4 M MgCl2 | Hydrophobic interactions | Check ligand stability |
Regeneration protocol
- Start with mildest condition (high salt)
- Test 30s contact time
- Verify complete dissociation (return to baseline)
- Verify retained ligand activity (repeat binding)
- Use shortest effective contact time
BLI tips
- Tips are often disposable (no regeneration needed)
- For reuse: Same conditions as SPR, but shorter exposure
- Anti-His tips: 10 mM Glycine pH 1.5, 30s
- Streptavidin tips: Generally not regenerable
Common artifacts and solutions
Biphasic binding
Symptoms: Two-rate association or dissociation Causes:
- Sample heterogeneity (aggregates)
- Ligand heterogeneity (multiple conformations)
- Avidity effects (bivalent analyte)
Solutions:
- Filter/centrifuge sample
- Use monovalent Fab fragments
- Reduce ligand density
- Fit to heterogeneous model
Negative dissociation
Symptoms: Signal increases during dissociation phase Causes:
- Ligand leaching from surface
- Analyte aggregation on surface
- Reference channel drift
Solutions:
- Use capture antibody instead of direct immobilization
- Increase buffer stringency
- Better reference subtraction
Hook effect
Symptoms: Signal decreases at high analyte concentrations Causes:
- Surface saturation + rebinding suppression
- Crowding effects
Solutions:
- Reduce analyte concentration range
- Reduce ligand density
- Use smaller analyte fragments
Kinetic data quality checklist
Before analysis
- Reference-subtracted properly
- Buffer injection shows flat baseline
- Rmax consistent across concentrations
- No systematic drift during association
- Complete regeneration (return to baseline)
- Duplicate/triplicate injections consistent
Fitting quality
- Residuals randomly distributed (no systematic deviation)
- Chi² < 10% of Rmax (or < 1 RU² for low signals)
- kon and koff errors < 20% of values
- KD from kinetics matches equilibrium KD (within 3-fold)
- Fitted Rmax reasonable (close to theoretical)
Red flags
- kon approaching the mass transport limit (>10^7 M^-1s^-1), where rates are unreliable
- koff too fast to sample (> 0.1 s^-1) or too slow to measure in the dissociation window (< 10^-5 s^-1)
- Rmax >> theoretical maximum (aggregation or avidity)
- Large difference between kinetic and equilibrium KD
References
Platform comparisons
SPR protocols
Troubleshooting
- 4 Ways to Reduce NSB in SPR - Nicoya
- 3 Ways to Limit Mass Transfer Effects - Nicoya
- Suppressing NSB in BLI - ACS Omega
Regeneration
Mass transport
Files in this skill
1binding-characterization skill questions
How do I install the binding-characterization skill in Claude Code?
Run npx degit adaptyvbio/protein-design-skills/skills/binding-characterization ~/.claude/skills/binding-characterization. Claude Code loads skills from ~/.claude/skills (all projects) or .claude/skills (one project) and uses a skill when its description matches the task.
Which clients can use the binding-characterization skill?
Any client that reads the Agent Skills format: Claude Code, Codex, Gemini CLI and claude.ai (upload as a ZIP). Scripts in the skill run only where the client allows code execution.
What are the symptoms of mass transport limitation?
Symptoms include an observed kon that appears slower than the true kon, a linear association phase instead of exponential, and Rmax varying with flow rate.