Ermöglicht es AI Agents, Dokumenten-Proofs gegen die Bitcoin-Blockchain zu stempeln, zu aktualisieren und zu verifizieren – mithilfe des OpenTimestamps-Protokolls.
Auch bekannt als OTSkit/OTSkit-MCP, @otskit/mcp
- Stars
- 3
- Tools
- 9
- Downloads, 30 Tage
- —
- Neueste Version
- 0.2.1
- Letzter Commit
- 12. Nov. 2026
- Lizenz
- MIT
Was ist OTSkit MCP?
Ermöglicht es AI Agents, Dokumenten-Proofs gegen die Bitcoin-Blockchain zu stempeln, zu aktualisieren und zu verifizieren – mithilfe des OpenTimestamps-Protokolls. Er stellt 9 Tools bereit, etwa create_timestamp, upgrade_timestamp, verify_timestamp.
Zusammenfassung generiert aus dem README des Projekts
Über OTSkit MCP server
Mit diesem MCP server können Entwickler Dokumente gegen die Bitcoin-Blockchain timestampen. Er gibt AI Agents die Fähigkeit, Proofs mithilfe des OpenTimestamps-Protokolls zu erstellen, zu überwachen und zu validieren. Durch die Verbindung mit Agents wie Claude Desktop, Claude Code oder Codex ermöglicht der Server die Erstellung unveränderlicher Datensätze durch SHA-256 Hashing und die Integration in den Bitcoin-Kalender.
Nutzer interagieren mit dem Server über Tools wie stamp_file, um lokale Dateien in einem Schritt zu hashen und zu timestampen, oder verify_timestamp, um zu beweisen, dass ein Hash vor einem bestimmten Bitcoin-Block existierte. Das System verwaltet Daten lokal über eine SQLite-Datenbank im Benutzerverzeichnis und steuert den Übergang von Proofs vom Status pending zum Status confirmed. Es enthält spezialisierte Funktionen wie watch, um Netzwerk-Confirmations zu überwachen, und upgrade_timestamp, um die Aufnahme in einen Bitcoin-Block zu prüfen. So können Agents den Lifecycle eines Proofs ohne manuelles Eingreifen verwalten.
Geschrieben aus dem README des Projekts. Jeder Use Case wurde gegen ein Zitat daraus geprüft.
So installierst du OTSkit MCP
Formate geprüft am 10. Nov. 2026Zu Cursor hinzufügenZu Goose hinzufügenOTSkit MCP in Claude Code installieren
$ claude mcp add otskit-mcp -- npx -y @otskit/mcpOTSkit MCP in Cursor installieren
~/.cursor/mcp.json
{
"mcpServers": {
"otskit-mcp": {
"command": "npx",
"args": [
"-y",
"@otskit/mcp"
]
}
}
}OTSkit MCP in VS Code installieren
.vscode/mcp.json
{
"servers": {
"otskit-mcp": {
"type": "stdio",
"command": "npx",
"args": [
"-y",
"@otskit/mcp"
]
}
}
}OTSkit MCP in VS Code CLI installieren
$ code --add-mcp '{"name":"otskit-mcp","type":"stdio","command":"npx","args":["-y","@otskit/mcp"]}'OTSkit MCP in Claude Desktop installieren
claude_desktop_config.json
{
"mcpServers": {
"otskit-mcp": {
"command": "npx",
"args": [
"-y",
"@otskit/mcp"
]
}
}
}OTSkit MCP in Codex installieren
$ codex mcp add otskit-mcp -- npx -y @otskit/mcpOTSkit MCP in Codex config.toml installieren
~/.codex/config.toml
[mcp_servers.otskit-mcp] command = "npx" args = ["-y", "@otskit/mcp"]
OTSkit MCP in Gemini CLI installieren
$ gemini mcp add -s user otskit-mcp npx -- -y @otskit/mcpOTSkit MCP in Gemini settings.json installieren
~/.gemini/settings.json
{
"mcpServers": {
"otskit-mcp": {
"command": "npx",
"args": [
"-y",
"@otskit/mcp"
]
}
}
}OTSkit MCP tools 9
Erkannt aus dem READMEcreate_timestampupgrade_timestampverify_timestampverify_external_proofinspect_timestamplist_pendingwatchhash_filestamp_file
| create_timestamp | — | |
| upgrade_timestamp | — | |
| verify_timestamp | — | |
| verify_external_proof | — | |
| inspect_timestamp | — | |
| list_pending | — | |
| watch | — | |
| hash_file | — | |
| stamp_file | — |
Automatisierte Checks
Geluften am 13. Nov. 2026Vollständiger Bericht →Unsere automatisierten Checks bestanden. Das ist kein Security-Audit: Lies den Code und gib dem Server nur den minimal notwendigen Zugriff. Wie die Checks funktionieren
- Source Repository verknüpft und erreichbarBestanden
- Open Source Lizenz (OSI)Bestanden
- Commit oder Release im letzten JahrBestanden
- Package-Name ähnelt keinem populären PackageBestanden
- Remote Endpoint nutzt HTTPSNicht geprüft
- Destruktive Tools sind markiertBestanden
- Keine versteckten Anweisungen an das ModellBestanden
- Keine kritischen Advisories im Paket oder seinen AbhängigkeitenBestanden
README
Auf GitHub ansehen@otskit/mcp
OpenTimestamps MCP server - stamp, upgrade, and verify Bitcoin timestamps via AI agents.
Exposes a set of tools to any MCP-compatible agent so it can timestamp documents, monitor confirmation status, and verify proofs against the Bitcoin blockchain - all from a conversation.
This is an independent implementation of the OpenTimestamps protocol. It is not affiliated with, endorsed by, or maintained by the OpenTimestamps project.
Note on confirmation times: After stamping, a proof is
pendinguntil Bitcoin confirms it. Confirmations typically arrive within ~60 minutes, but can take several hours during network congestion. Useots-mcp watchorupgrade_timestampto monitor. A pending proof is not a failed proof.
Install
npm install -g @otskit/mcp
Agent setup
ots-mcp setup claude # Claude Desktop
ots-mcp setup claude-code # Claude Code CLI
ots-mcp setup codex # Codex CLI
Each command writes the MCP entry into the agent's config file, makes a .bak backup if the file already exists, and skips if ots-mcp is already configured. Restart the agent afterwards to apply the changes.
CLI commands
| Command | Description |
|---|---|
ots-mcp serve |
Start the MCP server (stdio transport) |
ots-mcp stamp <sha256> |
Stamp a SHA-256 hash against Bitcoin calendars |
ots-mcp upgrade <id> |
Check if a pending stamp has been confirmed |
ots-mcp verify <id> |
Verify a stamp against Bitcoin |
ots-mcp list [status] |
List stamps (pending / confirmed / failed) |
ots-mcp watch [minutes] |
Monitor pending stamps and attempt due upgrades (default: 30 min, minimum: 15 min) |
ots-mcp check-pending |
Run one upgrade pass over all pending stamps |
ots-mcp scheduler install|remove|status |
Manage OS-level scheduler for auto-upgrades |
ots-mcp backup [dest] |
Backup the SQLite database |
ots-mcp setup <claude|claude-code|codex> |
Configure MCP for an agent |
MCP tools exposed to agents
| Tool | Description |
|---|---|
create_timestamp |
Stamp a SHA-256 hash against 4 public OTS calendars |
upgrade_timestamp |
Check if a pending stamp has been confirmed in Bitcoin |
verify_timestamp |
Verify a stamp - proves hash existed before a given Bitcoin block |
verify_external_proof |
Verify a whitelisted local file against its external .ots proof, without changing the local stamp store |
inspect_timestamp |
Inspect a stored proof file without network calls |
list_pending |
List stamps with status, retry count, and filters |
watch |
Open a terminal window monitoring pending stamps and attempting due upgrades |
hash_file |
Compute the SHA-256 of a local file and return it as a 64-char hex string (no network calls) |
stamp_file |
Compute SHA-256 of a local file and stamp it on Bitcoin in one step |
Data directory
All data is stored in ~/.ots-mcp/:
~/.ots-mcp/
ots-mcp.db # SQLite database (stamps, proof files)
config.json # Optional config overrides
ots-mcp.log # Log file
Configuration
Create ~/.ots-mcp/config.json to override defaults:
{
"stamp_enabled": true,
"scheduler_interval_minutes": 30,
"retry_max_attempts": 20,
"calendar_timeout_ms": 10000,
"calendars": [
"https://alice.btc.calendar.opentimestamps.org",
"https://bob.btc.calendar.opentimestamps.org",
"https://finney.calendar.eternitywall.com",
"https://btc.calendar.catallaxy.com"
]
}
Development
npm run build # production build
npm run dev # watch mode
npm test # run tests
Dependencies
@otskit/client- OTS calendar client (brings in@otskit/core, the protocol engine)@modelcontextprotocol/sdk- MCP SDKnode-sqlite3-wasm- local database (pure WASM, no native compilation)
Requires Node.js >= 20.
OTSkit MCP Fragen
Wie füge ich OTSkit MCP zu Claude Code hinzu?
Führe claude mcp add otskit-mcp -- npx -y @otskit/mcp in deinem Terminal aus. Füge --scope user hinzu, damit der Server in jedem Projekt verfügbar ist.
Wie füge ich OTSkit MCP zu Cursor hinzu?
Öffne ~/.cursor/mcp.json und füge den Server unter mcpServers hinzu, mit der Cursor-Config aus dem Installationsabschnitt oben.
Welche Tools bietet OTSkit MCP?
Er stellt 9 Tools bereit, darunter create_timestamp, upgrade_timestamp, verify_timestamp, verify_external_proof, inspect_timestamp.
Wo werden die Daten gespeichert?
Alle Daten, einschließlich der SQLite-Datenbank und der Logfiles, werden im Verzeichnis ~/.ots-mcp/ gespeichert.