Linux MCP server
Commit 13. Nov. 2026Bietet Echtzeit-Überwachung und Diagnose für Linux-Systeme, einschließlich CPU, Arbeitsspeicher, Festplatte, Netzwerk, Prozesse und Docker-Metriken über MCP tools.
Auch bekannt als Mohabdo21/linux-mcp, linux-mcp
- Stars
- 3
- Tools
- —
- Downloads, 30 Tage
- —
- Neueste Version
- 0.3.0
- Letzter Commit
- 13. Nov. 2026
- Lizenz
- MIT
Was ist Linux MCP?
Linux ist ein MCP server. Bietet Echtzeit-Überwachung und Diagnose für Linux-Systeme, einschließlich CPU, Arbeitsspeicher, Festplatte, Netzwerk, Prozesse und Docker-Metriken über MCP tools.
Zusammenfassung generiert aus dem README des Projekts
Über Linux MCP server
Linux MCP bietet Echtzeit-Monitoring und Diagnosefunktionen für Linux-Systeme über das Model Context Protocol. Es ermöglicht Entwicklern und Systemadministratoren, Hardware-, Software- und Netzwerkmetriken mithilfe eines AI-Clients zu inspizieren. Der Server läuft über STDIO-Transport und kann in Umgebungen wie Claude Desktop, Claude Code, OpenCode oder Codex integriert werden. Er erfordert eine Linux-Umgebung und kann über das MCP Registry, per vorkompilierter Binaries oder durch Build aus dem Quellcode mit Go installiert werden.
Der Server enthält 65 Tools und 19 Resources, die ein breites Spektrum an Systemdaten abdecken. Nutzer können die CPU-Auslastung, den Arbeitsspeicher- und Swap-Verbrauch, Details zu Festplattenpartitionen und Statistiken der Netzwerkschnittstellen überwachen. Er bietet zudem tiefe Einblicke in laufende Prozesse, systemd units und Docker-Container-Metriken. Sicherheitsfunktionen umfassen das Auditing von fehlgeschlagenen Logins, den Firewall-Status und SUID-Dateien, während Hardware-Tools Informationen zu GPUs sowie PCI- oder USB-Bus-Geräten liefern.
Was du damit machen kannst
- 1Systemperformance analysierenFordere eine umfassende Übersicht über den aktuellen Systemzustand an, einschließlich Load Averages und Uptime.
- 2Docker-Umgebungen debuggenÜberprüfe den Status und die Ressourcennutzung von laufenden Containern und Images.
- 3Systemsicherheit prüfenIdentifiziere potenzielle Sicherheitsrisiken, indem du fehlgeschlagene Login-Versuche und Firewall-Konfigurationen kontrollierst.
- 4Low-Level-Kernel-Daten inspizierenFühre Tiefendiagnosen durch, indem du dir Interrupts und Filesystem-Statistiken über das proc-Verzeichnis ansiehst.
Geschrieben aus dem README des Projekts. Jeder Use Case wurde gegen ein Zitat daraus geprüft.
Automatisierte Checks
Geluften am 14. Nov. 2026Vollständiger Bericht →Noch nicht verifiziert. Ein Server benötigt einen Score von 80, keine kritischen Befunde und genug Daten für unsere Prüfung. Wie die Checks funktionieren · Was du für mehr Punkte verbessern kannst
- Source Repository verknüpft und erreichbarmohabdo21/linux-mcp is public and reachablegithub.com/mohabdo21/linux-mcp ↗Bestanden
- Paket nennt dieses Repository als QuelleNicht geprüft
- Build-Provenienz (Sigstore-Attestierung)Nicht geprüft
- Open Source Lizenz (OSI)MITspdx.org/licenses/MIT.html ↗Bestanden
- Commit oder Release im letzten JahrLast commit or release 2026-11-05github.com/mohabdo21/linux-mcp ↗Bestanden
- OpenSSF ScorecardNicht geprüft
- Package-Name ähnelt keinem populären PackageNicht geprüft
- Keine kritischen Advisories im Paket oder seinen AbhängigkeitenNicht geprüft
- Keine versteckten Anweisungen an das Modell0 tool descriptions and the README read; no override phrases, credential paths or hidden charactersBestanden
- Destruktive Tools sind markiertNicht geprüft
- Remote-Endpoint beantwortet den MCP-HandshakeNicht geprüft
README
Auf GitHub ansehenlinux-mcp - Linux MCP Server
A Linux system monitoring server built on the Model Context Protocol (MCP). Provides real-time system information - CPU, memory, disk, network, processes, Docker, and more - via MCP tools over STDIO transport.
Features
- System - hostname, OS, kernel, architecture, uptime, load averages
- CPU - usage, model, frequency, core counts, temperature sensors
- Memory - RAM and swap usage with percentages
- Disk - per-partition usage, inodes, mount options, largest files, block devices
- Network - interface stats, active connections, listening ports, DNS, ping, IP geolocation & ASN lookup
- Processes - running processes sorted by CPU or memory, open file descriptors per process
- Docker - containers, images, networks, volumes, disk usage, system info, and container stats
- Services & automation - systemd units, service status, user timers, crontab, system cron jobs
- Security - active user sessions, failed login detection, SELinux/AppArmor status, firewall/SSH/SUID/world-writable audit with security score
- Packages - installed packages and available updates (pacman, dpkg, rpm/dnf, apk)
- Hardware - GPU info, PCI/USB bus devices, power/battery analytics
- Desktop session - Wayland/X11 protocol, DE identifiers, runtime config
- Storage health - RAID status, logrotate configuration, time synchronization, SMART disk health, per-device I/O metrics
- System health - comprehensive health assessment with memory, disk, load, and systemd checks
- /proc diagnostics - deep /proc inspection: interrupts, softirqs, vmstat, diskstats, filesystems, kernel version, slabinfo
- Man pages - system manual pages for any installed command
- Snapshot - comprehensive system overview in a single call
- MCP Resources - system data also accessible as readable resources
Prerequisites
- Go 1.27+ (to build from source)
- Linux (the server targets Linux; some tools use Linux-specific paths)
- Docker (optional - only needed for Docker tools)
Installation
Via MCP Registry
Discover the server on the MCP Registry and install via your MCP client (VS Code one-click install, or manual config).
Download pre-built binary
Download the latest binary from the GitHub Releases page:
curl -LO https://github.com/Mohabdo21/linux-mcp/releases/latest/download/linux-mcp
chmod +x linux-mcp
A fully static build (no libc dependency) is also available as linux-mcp_static.
Via go install
go install github.com/Mohabdo21/linux-mcp@latest
The binary is placed in $GOPATH/bin/ (typically ~/go/bin/).
Build from source
git clone https://github.com/Mohabdo21/linux-mcp.git
cd linux-mcp
make build
The binary is placed at bin/linux-mcp.
For a fully static binary (no libc dependency):
make build-static
Usage
The server communicates over STDIO transport, following the MCP standard. It is designed to be launched by an MCP client (e.g., Claude Desktop, Claude Code, Codex, OpenCode, or any MCP host).
Running directly
./bin/linux-mcp
This starts the server and listens for MCP requests on STDIN/STDOUT.
Integration
Add the following to your OpenCode configuration:
{
"mcp": {
"linux-mcp": {
"type": "local",
"command": ["/path/to/linux-mcp"],
"enabled": true
}
}
}
Add the server via the CLI:
claude mcp add linux-mcp -- /path/to/linux-mcp
To scope it to all your projects instead of just the current one:
claude mcp add linux-mcp --scope user -- /path/to/linux-mcp
Or create a .mcp.json file in your project root for team-shared configuration:
{
"mcpServers": {
"linux-mcp": {
"type": "stdio",
"command": "/path/to/linux-mcp"
}
}
}
Verify the connection inside a Claude Code session with /mcp.
Add the server via the CLI:
codex mcp add linux-mcp -- /path/to/linux-mcp
Or add it manually to ~/.codex/config.toml (or .codex/config.toml for project-scoped config):
[mcp_servers.linux-mcp]
command = "/path/to/linux-mcp"
Verify the connection with codex mcp list.
Tools and resources
65 tools and 19 resources covering system, CPU, memory, disk, network, processes, Docker, security, packages, hardware, and more.
Full tool and resource reference
Configuration
The server can be configured via a JSON file loaded from ~/.config/linux-mcp/config.json or the LINUX_MCP_CONFIG environment variable.
{
"log_level": "info",
"timeouts": {
"get_system_snapshot": "60s",
"ping_host": "5s"
},
"disabled": []
}
| Field | Description |
|---|---|
log_level |
One of debug, info, warn, error (default: info) |
timeouts |
Per-tool timeout overrides as Go duration strings |
disabled |
Tool names to disable, including their resource and aggregate collector paths |
Invalid configuration prevents startup. The server also handles SIGHUP to reload the configuration file at runtime without restarting; a failed reload retains the last valid configuration. Disabled collectors are skipped by aggregate tools and reported in their errors.
Docker diagnostic responses omit environment values and raw command arguments, including image-history commands. Other diagnostic content, such as logs and labels, can still contain sensitive data; grant access only to trusted clients.
MCP Registry
Published on the MCP Registry as io.github.Mohabdo21/linux-mcp.
License
Dependencies
- modelcontextprotocol/go-sdk - MCP SDK for Go
- shirou/gopsutil/v4 - System metrics (CPU, memory, disk, network, processes, sensors)
- docker/go-sdk - Docker Engine API client
- moby/moby/client - Docker client library
- ip-api.com - Free IP geolocation API (used by
get_ip_info)
Linux MCP Fragen
Welche Systeminformationen kann ich überwachen?
Du kannst Hostname, OS, Kernel, Architektur, Uptime, Load Averages, CPU-Auslastung, Arbeitsspeicher, Festplattenpartitionen, Netzwerkstatistiken und laufende Prozesse überwachen.
Unterstützt dieser Server auch Docker-Monitoring?
Ja, er bietet Tools für Container, Images, Netzwerke, Volumes, Festplattenbelegung, Systeminfos und Container-Statistiken.