cobuilt MCP server
Commit 10. Nov. 2026Veröffentliche ehrliche Build Receipts auf cobuilt.dev, um zu dokumentieren, wie KI an deiner Projektentwicklung beteiligt war.
Auch bekannt als cobuilt-dev/agent-plugins, agent-plugins
- Stars
- 0
- Tools
- —
- Downloads, 30 Tage
- —
- Neueste Version
- 1.2.0
- Letzter Commit
- 10. Nov. 2026
- Lizenz
- MIT
Was ist cobuilt MCP?
cobuilt ist ein MCP server. Veröffentliche ehrliche Build Receipts auf cobuilt.dev, um zu dokumentieren, wie KI an deiner Projektentwicklung beteiligt war.
Zusammenfassung generiert aus dem README des Projekts
Über cobuilt MCP server
cobuilt ermöglicht es Entwicklern, die Claude Code oder Gemini CLI nutzen, die Rolle der künstlichen Intelligenz in ihrer Softwareentwicklung zu dokumentieren. Durch das Erstellen von Build Receipts erstellst du eine ehrliche Aufzeichnung darüber, wie KI-Tools zu deinem Projekt beigetragen haben, einschließlich der verwendeten Modelle und der Arbeitsteilung zwischen dir und dem Agent. Dieser Prozess sorgt für Transparenz, indem Details aus deinem Repository und deiner Session entworfen werden, bevor jedes Feld deine manuelle Freigabe erfordert.
Um diesen Server zu nutzen, musst du in deinen Kontoeinstellungen einen Agent Token erstellen, der mit cbt_ beginnt, und diesen während des Plugin-Installationsprozesses angeben. Der Server verbindet sich mit einem Remote-Endpoint, um deine Projekte und Receipts zu verwalten. Er enthält spezifische Tools, um deine Projekte aufzulisten, einen Drafting Guide aufzurufen, bestehende Receipts zu lesen und neue einzureichen. Da das System den Datenschutz priorisiert, ist der Agent angewiesen, niemals Quellcode, Secrets oder Chat-Transkripte zu senden; er überträgt die finalisierten Receipt-Daten erst, nachdem du den Inhalt überprüft und genehmigt hast.
Was du damit machen kannst
- 1Bestehende Projektdokumentation prüfenRufe den aktuellen Build Receipt ab, der mit deinem Projekt verknüpft ist, um zu sehen, was bereits aufgezeichnet wurde.
Geschrieben aus dem README des Projekts. Jeder Use Case wurde gegen ein Zitat daraus geprüft.
So installierst du cobuilt MCP
Formate geprüft am 10. Nov. 2026Zu Cursor hinzufügenZu Goose hinzufügencobuilt MCP in Claude Code installieren
$ claude mcp add --transport http agent-plugins https://cobuilt.dev/mcpcobuilt MCP in Cursor installieren
~/.cursor/mcp.json
{
"mcpServers": {
"agent-plugins": {
"url": "https://cobuilt.dev/mcp"
}
}
}cobuilt MCP in VS Code installieren
.vscode/mcp.json
{
"servers": {
"agent-plugins": {
"type": "http",
"url": "https://cobuilt.dev/mcp"
}
}
}cobuilt MCP in VS Code CLI installieren
$ code --add-mcp '{"name":"agent-plugins","type":"http","url":"https://cobuilt.dev/mcp"}'cobuilt MCP in Codex installieren
$ codex mcp add agent-plugins --url https://cobuilt.dev/mcpcobuilt MCP in Codex config.toml installieren
~/.codex/config.toml
[mcp_servers.agent-plugins] url = "https://cobuilt.dev/mcp"
cobuilt MCP in Gemini CLI installieren
$ gemini mcp add -s user --transport http agent-plugins https://cobuilt.dev/mcpcobuilt MCP in Gemini settings.json installieren
~/.gemini/settings.json
{
"mcpServers": {
"agent-plugins": {
"url": "https://cobuilt.dev/mcp",
"type": "http"
}
}
}Automatisierte Checks
Geluften am 15. Nov. 2026Vollständiger Bericht →Noch nicht verifiziert. Ein Server benötigt einen Score von 80, keine kritischen Befunde und genug Daten für unsere Prüfung. Wie die Checks funktionieren · Was du für mehr Punkte verbessern kannst
- Source Repository verknüpft und erreichbarcobuilt-dev/agent-plugins is public and reachablegithub.com/cobuilt-dev/agent-plugins ↗Bestanden
- Paket nennt dieses Repository als QuelleNicht geprüft
- Build-Provenienz (Sigstore-Attestierung)Nicht geprüft
- Open Source Lizenz (OSI)MITspdx.org/licenses/MIT.html ↗Bestanden
- Commit oder Release im letzten JahrLast commit or release 2026-11-10github.com/cobuilt-dev/agent-plugins ↗Bestanden
- OpenSSF ScorecardNicht geprüft
- Package-Name ähnelt keinem populären PackageNicht geprüft
- Keine kritischen Advisories im Paket oder seinen AbhängigkeitenNicht geprüft
- Keine versteckten Anweisungen an das Modell0 tool descriptions and the README read; no override phrases, credential paths or hidden charactersBestanden
- Destruktive Tools sind markiertNicht geprüft
- Remote-Endpoint beantwortet den MCP-HandshakeHTTPS endpoint answered 401 (sign-in required)Bestanden
README
Auf GitHub ansehencobuilt plugin
Publish a build receipt for your project to cobuilt.dev from your AI coding agent. A build receipt is an honest record of how a project was built and how AI was involved. Your agent drafts it from the repository and the session, asks you what only you can answer, and sends nothing until you have approved every field.
Where it works
Publishing works in Claude Code and Gemini CLI, which can send your agent token. In claude.ai chat and Cowork the skill loads but the cobuilt tools don't work, because those apps connect servers through an OAuth sign-in, which cobuilt doesn't offer yet. Open your project in Claude Code to publish.
Try it
Say any of these in your project:
- "Publish this project to cobuilt." Your agent drafts the receipt, asks what it can't know, and shows you the final fields to approve.
- "Show me the build receipt this project has on cobuilt." It finds the project among yours and reads the current receipt. Nothing is changed.
- "Update this project's build receipt on cobuilt." It starts from the published receipt, shows you the old and new text side by side, and warns you before replacing anything.
Install (Claude Code)
-
Sign in at cobuilt.dev and create an agent token: Settings → Agent tokens (it starts with
cbt_). -
In a Claude Code session, run:
/plugin install cobuilt --marketplace cobuilt-dev/agent-pluginsPaste your token when the dialog asks for it, then run
/reload-plugins. -
Say "Publish this project to cobuilt", or run
/cobuilt:publish.
If it doesn't work
- Added cobuilt with
claude mcp addbefore? Runclaude mcp remove cobuilt --scope userfirst. A server you added by hand at the same address silently replaces the plugin's. - No cobuilt tools? Run
/plugin configure cobuilt@cobuilt, paste your token, then/reload-plugins. Installing from the shell (claude plugin install) doesn't ask for the token. - Added the plugin on claude.ai? It reaches Claude Code as
cobuilt@synced, so run/plugin configure cobuilt@syncedinstead. - Use Cursor too? Cursor imports the Claude Code plugins you installed (Cursor Settings → Agents → Third-Party
Imports, on by default) and lists this one as "cobuilt · Plugin" with an error, because it can't read the token.
Switch that entry off in Cursor's MCP list (it stays off after a restart) and set Cursor up with the
~/.cursor/mcp.jsonsnippet from cobuilt.dev/connect.
Install (Gemini CLI)
-
Create an agent token as above.
-
In a terminal, run:
gemini extensions install https://github.com/cobuilt-dev/agent-pluginsPaste your token when it asks for cobuilt agent token.
-
Start Gemini CLI and say "Publish this project to cobuilt".
No cobuilt tools? Run gemini extensions config cobuilt, paste your token, then restart Gemini CLI.
gemini mcp list should show cobuilt as connected.
Setup for other clients: cobuilt.dev/connect.
What it contains
- The cobuilt MCP server (
https://cobuilt.dev/mcp), sent your token asAuthorization: Bearer …. Its tools: list your projects, get the drafting guide, read your current receipt, submit a build receipt. - One skill,
publish, shared by Claude Code and Gemini CLI. Your client asks before each cobuilt tool call unless you allow it, and submitting a receipt always asks you first.
Your token
Claude Code stores the token as a secret: in the macOS Keychain, elsewhere in Claude Code's own credentials file in your user folder. Uninstalling the plugin removes it.
Gemini CLI stores it in your system keychain (on Windows, Credential Manager under "Gemini CLI Extensions cobuilt …"; without a keychain, in a file in Gemini CLI's own settings folder). Uninstalling the extension does not remove it: delete that entry yourself (on Windows: Control Panel → Credential Manager → Windows Credentials → Generic Credentials).
Revoking the token in Settings → Agent tokens on cobuilt.dev is the real off switch.
What it sends and where
The plugin runs nothing on your machine: no hooks, scripts or local commands. It talks to one server,
https://cobuilt.dev/mcp, and every request carries your agent token.
- Reading: your agent asks for the drafting guide, your list of projects and a project's current receipt.
- Publishing: after you approve, it sends the receipt: project title, description, links, type and tech stack (for a new project), how AI was involved, the AI tools used, what the AI did, what you did, what went wrong, the agent and model names, and optional summary numbers such as commit counts.
A submitted receipt is public once its project is approved, and a new project is reviewed first. Sending a receipt for an existing project replaces its current one. cobuilt keeps the receipt until you replace it or delete the project.
The plugin's instructions tell your agent never to send source code, diffs, file contents, prompts, chat transcripts, secrets, environment variables or local file paths. Your agent shows you every field first, so check them before you approve. See the privacy policy and terms.
Releases
Each change bumps the version in every manifest and gets a GitHub Release tagged vX.Y.Z. Changes to the drafting
guide and the tools ship on cobuilt.dev and need no plugin update. Changes to this README alone don't bump the version.
server.json lists the server in the official MCP Registry as
dev.cobuilt/cobuilt. It carries the same version as the plugin, and a published version can't be republished, so a change
to it needs a release and then a new publish.
License
cobuilt MCP Fragen
Wie füge ich cobuilt MCP zu Claude Code hinzu?
Führe claude mcp add --transport http agent-plugins https://cobuilt.dev/mcp in deinem Terminal aus. Füge --scope user hinzu, damit der Server in jedem Projekt verfügbar ist.
Wie füge ich cobuilt MCP zu Cursor hinzu?
Öffne ~/.cursor/mcp.json und füge den Server unter mcpServers hinzu, mit der Cursor-Config aus dem Installationsabschnitt oben.
Wo funktioniert das?
Es funktioniert in Claude Code und Gemini CLI. Aktuell funktioniert es nicht im claude.ai Chat oder Cowork, da diese OAuth erfordern.
Führt das Plugin lokalen Code aus?
Nein, das Plugin führt keine Hooks, Skripte oder lokalen Befehle auf deinem Rechner aus.
Welche Informationen werden beim Veröffentlichen eines Receipts gesendet?
Es werden Projektdetails wie Titel, Beschreibung und Tech Stack gesendet, zusammen mit Details zum KI-Einsatz, den verwendeten Tools und der Aufgabenverteilung zwischen KI und Mensch.
Wie installiere ich es in Claude Code?
Führe /plugin install cobuilt --marketplace cobuilt-dev/agent-plugins in einer Claude Code Session aus und füge deinen Agent Token ein.