CallNode MCP server
Commit 22. Okt. 2026Ermöglicht es KI-Assistenten, Anruf- und Nachrichtenverläufe zu lesen, SMS/MMS zu versenden und Telefonate über CallNode-Telefonnummern zu tätigen.
Auch bekannt als cnchg/CallNode
- Stars
- 0
- Tools
- 13
- Downloads, 30 Tage
- —
- Neueste Version
- 1.0.0
- Letzter Commit
- 22. Okt. 2026
- Lizenz
- MIT
Was ist CallNode MCP?
CallNode ist ein MCP server. Ermöglicht es KI-Assistenten, Anruf- und Nachrichtenverläufe zu lesen, SMS/MMS zu versenden und Telefonate über CallNode-Telefonnummern zu tätigen. Er stellt 13 Tools bereit, etwa list_numbers, get_number, list_calls.
Zusammenfassung generiert aus dem README des Projekts
Über CallNode MCP server
CallNode bietet einen gehosteten MCP server, der deine CallNode-Telefonnummern direkt mit KI-Assistenten verbindet. Dieses Setup ermöglicht es Nutzern, Kommunikationsfunktionen in Plattformen wie Claude Desktop, ChatGPT, Cursor und VS Code zu integrieren, ohne lokale Software installieren zu müssen. Durch die Angabe einer Server-URL und einen OAuth-basierten Consent-Prozess kannst du einem Assistenten die Erlaubnis erteilen, mit den spezifischen Telefonnummern zu interagieren, die du in deinem Dashboard ausgewählt hast.
Sobald die Verbindung steht, kann der Assistent verschiedene Kommunikationsaufgaben mit Tools wie send_message, place_call und list_messages ausführen. Du kannst Berechtigungen granular verwalten und entscheiden, ob die KI den Verlauf lesen, SMS/MMS versenden oder dein Telefonbuch verwalten darf. Das System enthält Sicherheitsfunktionen wie ein stündliches Versandlimit und zeitliche Beschränkungen, um sicherzustellen, dass Nachrichten und Anrufe zu angemessenen lokalen Zeiten erfolgen. Dies macht es zu einer praktischen Lösung für Entwickler, die Telefonie-Aufgaben über eine konversationelle Schnittstelle automatisieren möchten.
Was du damit machen kannst
- 1Kommunikationsverlauf prüfenBitte deinen KI-Assistenten, kürzliche Interaktionen zusammenzufassen oder den Status früherer Nachrichten zu prüfen.
- 2Outbound Messaging automatisierenAnweisung an den Assistenten, eine Textnachricht oder ein Bild an einen bestimmten Kontakt oder eine Telefonnummer zu senden.
- 3Sprachanrufe ausführenLass die KI einen Telefonanruf tätigen, wobei ein Voice Agent die Konversation basierend auf deinen Anweisungen übernimmt.
- 4Kontaktlisten verwaltenNutze den Assistenten, um Namen in deinem Telefonbuch nachzuschlagen oder neue Kontakte zu deinem Verzeichnis hinzuzufügen.
Geschrieben aus dem README des Projekts. Jeder Use Case wurde gegen ein Zitat daraus geprüft.
So installierst du CallNode MCP
Formate geprüft am 10. Nov. 2026Zu Cursor hinzufügenZu Goose hinzufügenCallNode MCP in Claude Code installieren
$ claude mcp add --transport http callnode https://mcp.callnode.io/mcpCallNode MCP in Cursor installieren
~/.cursor/mcp.json
{
"mcpServers": {
"callnode": {
"url": "https://mcp.callnode.io/mcp"
}
}
}CallNode MCP in VS Code installieren
.vscode/mcp.json
{
"servers": {
"callnode": {
"type": "http",
"url": "https://mcp.callnode.io/mcp"
}
}
}CallNode MCP in VS Code CLI installieren
$ code --add-mcp '{"name":"callnode","type":"http","url":"https://mcp.callnode.io/mcp"}'CallNode MCP in Codex installieren
$ codex mcp add callnode --url https://mcp.callnode.io/mcpCallNode MCP in Codex config.toml installieren
~/.codex/config.toml
[mcp_servers.callnode] url = "https://mcp.callnode.io/mcp"
CallNode MCP in Gemini CLI installieren
$ gemini mcp add -s user --transport http callnode https://mcp.callnode.io/mcpCallNode MCP in Gemini settings.json installieren
~/.gemini/settings.json
{
"mcpServers": {
"callnode": {
"url": "https://mcp.callnode.io/mcp",
"type": "http"
}
}
}CallNode MCP tools 13
Erkannt aus dem READMElist_numbersget_numberlist_callsget_callplace_calllist_messagesget_messagesend_messagelist_phone_bookadd_phone_book_contactremove_phone_book_contactget_balance
| list_numbers | — | |
| get_number | — | |
| list_calls | — | |
| get_call | — | |
| place_call | — | |
| list_messages | — | |
| get_message | — | |
| send_message | — | |
| list_phone_book | — | |
| add_phone_book_contact | — | |
| remove_phone_book_contact | — | |
| get_balance | — |
Alle 13 Tools anzeigenWeniger Tools anzeigen
get_updates
| get_updates | — |
Automatisierte Checks
Geluften am 14. Nov. 2026Vollständiger Bericht →Noch nicht verifiziert. Ein Server benötigt einen Score von 80, keine kritischen Befunde und genug Daten für unsere Prüfung. Wie die Checks funktionieren · Was du für mehr Punkte verbessern kannst
- Source Repository verknüpft und erreichbarcnchg/callnode is public and reachablegithub.com/cnchg/callnode ↗Bestanden
- Paket nennt dieses Repository als QuelleNicht geprüft
- Build-Provenienz (Sigstore-Attestierung)Nicht geprüft
- Open Source Lizenz (OSI)MITspdx.org/licenses/MIT.html ↗Bestanden
- Commit oder Release im letzten JahrLast commit or release 2026-10-22github.com/cnchg/callnode ↗Bestanden
- OpenSSF ScorecardNicht geprüft
- Package-Name ähnelt keinem populären PackageNicht geprüft
- Keine kritischen Advisories im Paket oder seinen AbhängigkeitenNicht geprüft
- Keine versteckten Anweisungen an das Modell13 tool descriptions and the README read; no override phrases, credential paths or hidden charactersBestanden
- Destruktive Tools sind markiertNicht geprüft
- Remote-Endpoint beantwortet den MCP-HandshakeHTTPS endpoint answered 401 (sign-in required)Bestanden
README
Auf GitHub ansehenCallNode MCP server
Your CallNode phone numbers, inside your AI assistant.
CallNode hosts a Model Context Protocol (MCP) server at:
https://mcp.callnode.io/mcp
Sign in to it from claude.ai, Claude Desktop, ChatGPT, Claude Code, Cursor or VS Code, then tick the numbers the assistant may use. It can then:
- read your call and message history;
- send texts and picture messages;
- call or text your Phone Book contacts by name;
- once you switch calling on, place calls that the CallNode voice agent runs.
The server is hosted by CallNode, so there is nothing to install or run. This repository holds only the connection details: client configs, the registry entry and this README.
- What it can do, in plain words: https://callnode.io/integrations/mcp
- Every tool, permission, limit and error code: https://callnode.io/docs/mcp
Before you connect
- Create an account at https://callnode.io/signup (no credit card to start) and get a number. Self-serve numbers are local and toll-free numbers in the US and Canada.
- Open Dashboard → MCP Server, switch MCP access on, and tick the numbers an assistant may use. Every connection shares this one list; a number you did not tick cannot be read from or sent from.
Connect
You give the client only the server URL. It sends you to the CallNode consent page, and you approve. No token is created, and nothing secret is pasted into a file or a shell.
On the consent page you can untick permissions (sending, for example), choose a live or test connection, and set an hourly send cap. Afterwards the connection appears under Dashboard → MCP Server, and you can revoke it there at any time.
claude.ai and Claude Desktop
- Open Settings → Connectors and choose Add custom connector.
- Enter
https://mcp.callnode.io/mcpas the server URL and continue. Leave the client id and secret fields empty. - Claude opens the CallNode sign-in page. Log in if asked, review the numbers and permissions, and approve.
- Back in Claude, enable the connector in a chat.
ChatGPT
- Enable Developer mode under Settings → Connectors → Advanced, then choose Create.
- Enter
https://mcp.callnode.io/mcpas the MCP server URL and pick OAuth for authentication. No client id or secret is needed, because ChatGPT registers itself. - Approve on the CallNode sign-in page, then add the connector to a chat.
Claude Code
Either use .mcp.json from this repository in your project, or run this once:
claude mcp add --transport http callnode https://mcp.callnode.io/mcp
Inside Claude Code, type /mcp, pick callnode and choose Authenticate. Approve in the browser.
VS Code (Copilot agent mode)
- Save
.vscode/mcp.jsonin your workspace, then start the callnode server. VS Code opens the CallNode consent page; approve. - In Copilot Chat, choose Agent mode and tick the callnode tools.
Cursor
- Save
.cursor/mcp.jsonin your project, or the same entry in~/.cursor/mcp.json, then reload Cursor. - In Settings → MCP the server shows Needs login. Click it and approve in the browser.
Without a browser sign-in
For automations where a browser sign-in isn't possible, create a token connection in the dashboard. The snippets for each client are at https://callnode.io/docs/mcp#clients.
Tools
Each tool is bound to a permission you grant. A connection without that permission does not see the tool at all.
| Tool | Permission | What it does |
|---|---|---|
list_numbers |
numbers:read |
The enabled numbers, with what each can do and whether it has its own voice agent. |
get_number |
numbers:read |
One enabled number. Never webhook addresses, routing or credentials. |
list_calls |
calls:read |
Call records on the enabled numbers, newest first. No transcripts. |
get_call |
calls:read |
One call record, including how it ended. For calls placed through MCP: the summary, outcome and transcript. |
place_call |
calls:place |
Place a call. The CallNode voice agent runs it from your instructions, or the number's own voice webhook does. Off by default. |
list_messages |
messages:read |
SMS/MMS history on the enabled numbers. |
get_message |
messages:read |
One message, with its delivery status. |
send_message |
messages:send |
Send a text or picture message, to a number or to a Phone Book contact by name. |
list_phone_book |
phonebook:read |
Your Phone Book: your own lines, with their labels. |
add_phone_book_contact |
phonebook:manage |
Prepares an entry and returns a link. Only you can certify and save it. |
remove_phone_book_contact |
phonebook:manage |
Removes a Phone Book entry. |
get_balance |
account:read |
Your prepaid balance and auto-recharge settings. |
get_updates |
messages:read |
New inbound texts (and calls, when the connection can read calls) since the last check, with an optional wait of up to 20 seconds. |
send_message and place_call are marked as actions that reach a person and cannot be undone (destructiveHint), so clients that honour tool hints ask you before running them.
Safety and limits
- Numbers. Only the numbers you tick are visible, and no token can widen that list.
- Same rules as the API. Sends and calls go through the same rules as the CallNode API:
- opt-outs and STOP replies are honoured;
- texts and calls fall inside 8am–9pm in the recipient's local time, except your own certified Phone Book lines;
- sending numbers must be registered for messaging;
- calls need business verification, and do-not-call lists, destination restrictions and your concurrent-call limit apply;
- your balance must cover each send.
- Per-connection limits:
- 30 sends an hour by default, settable from 1 to 200;
- an identical text to the same recipient within 60 seconds is sent once;
- 10 calls an hour, and the same from/to pair within 60 seconds is never dialled twice;
- 120 tool calls a minute.
- The voice agent introduces itself as an AI assistant calling on behalf of your business and never claims to be human. It cannot transfer a call or take card details.
- Untrusted content. Message bodies and caller-supplied text reach the assistant marked as untrusted, so a text that tries to give it instructions reads as data.
- Activity log. Every tool call, allowed or refused, appears under Recent activity in your dashboard. Message contents are never stored there.
- Revoking. A revoked connection is refused on its next request. A sign-in lapses after 90 days without a fresh one.
- Test connections run every rule, then simulate the send or the call. Nothing leaves the platform and nothing is charged.
Pricing
The MCP server has no fee. Texts and calls are billed from your prepaid balance at your normal rates, and calls the CallNode voice agent runs add a per-minute rate for the voice. All rates are on https://callnode.io/pricing.
Support
- Help: support@callnode.io
- Security reports: security@callnode.io
- Privacy: https://callnode.io/privacy
- Terms: https://callnode.io/terms
- Security: https://callnode.io/security
Files in this repository
| File | For |
|---|---|
server.json |
The Official MCP Registry entry (io.callnode/mcp) |
.mcp.json |
Claude Code |
.vscode/mcp.json |
VS Code |
.cursor/mcp.json |
Cursor |
These files are released under the MIT License. The CallNode service itself is covered by the CallNode Terms.
CallNode MCP Fragen
Wie füge ich CallNode MCP zu Claude Code hinzu?
Führe claude mcp add --transport http callnode https://mcp.callnode.io/mcp in deinem Terminal aus. Füge --scope user hinzu, damit der Server in jedem Projekt verfügbar ist.
Wie füge ich CallNode MCP zu Cursor hinzu?
Öffne ~/.cursor/mcp.json und füge den Server unter mcpServers hinzu, mit der Cursor-Config aus dem Installationsabschnitt oben.
Welche Tools bietet CallNode MCP?
Er stellt 13 Tools bereit, darunter list_numbers, get_number, list_calls, get_call, place_call.
Wie verbinde ich CallNode mit meinem KI-Assistenten?
Du gibst die Server-URL in deinem Client ein, was dich zu einer CallNode-Zustimmungsseite weiterleitet. Dort kannst du die Berechtigungen bestätigen und spezifische Telefonnummern auswählen.
Fallen Gebühren für die Nutzung des MCP server an?
Der MCP server selbst kostet keine zusätzliche Gebühr, aber SMS und Anrufe werden über dein Prepaid-Guthaben bei CallNode zu den regulären Tarifen abgerechnet.
Kann der KI-Assistent Telefonanrufe tätigen?
Ja, sobald die Anruffunktion aktiviert ist, kann der Assistent Anrufe tätigen, die dann vom CallNode Voice Agent übernommen werden.