AI istemcilerinin bakiyeler, hesap durumları, işlemler, get-method'lar için doğrudan TON liteserver'larına sorgu yapmasına ve imzalanmamış swap'lar oluşturmasına olanak tanır.
Ayrıca bilinen adı tonnode/mcp, mcp, @tonnode/mcp
- Yıldızlar
- 20
- Araçlar
- 16
- İndirmeler, 30 gün
- —
- En son sürüm
- 0.9.2
- Son commit
- 8 Eki 2026
- Lisans
- MIT
TON MCP nedir?
TON bir MCP sunucusudur. AI istemcilerinin bakiyeler, hesap durumları, işlemler, get-method'lar için doğrudan TON liteserver'larına sorgu yapmasına ve imzalanmamış swap'lar oluşturmasına olanak tanır. 16 araç sunar; örneğin get_balance, get_jetton_balance, get_jetton_info.
Özet, projenin README dosyasından oluşturuldu
TON MCP sunucusu hakkında
Bu server, AI agent'ların doğrudan TON blockchain üzerinde sorgu yapabilmesini sağlar. Yerel ADNL protokolü aracılığıyla liteserver'lara doğrudan erişim sağlayarak, hesap durumlarını, işlem geçmişlerini ve jetton bakiyelerini çekmek için geleneksel HTTP gateway'lerini devre dışı bırakır. Geliştiriciler, yerel kullanım için basit bir npx komutuyla veya uzak dağıtımlar için hosted HTTP endpoint'i aracılığıyla bu özelliği Claude Desktop, Cursor veya ChatGPT gibi istemcilere entegre edebilirler.
Basit veri çekme işlemlerinin ötesinde, server agent'ların birer trader gibi hareket etmesine olanak tanır. Omniston protokolünü kullanarak GRAM ve çeşitli jetton'lar için imzalanmamış swap işlemleri oluşturmayı destekler; ayrıca Ethereum, Arbitrum ve Avalanche gibi ağları içeren karmaşık cross-chain swap'ları yönetebilir. Ayrıca v4 veya highload_v3 gibi belirli kontrat versiyonlarına sahip yeni cüzdanlar oluşturmak için araçlar içerir. Hosted versiyonu kullananlar için server, Bearer anahtarları aracılığıyla kimlik doğrulamayı yönetir ve kararlı performans sağlamak için ayrıntılı hız sınırlaması sunar.
Neler yapabilirsiniz
- 1Cüzdan bakiyelerini kontrol etmeBir AI agent, belirli bir adresin mevcut GRAM veya USDT varlıklarını belirleyebilir.
- 2Merkeziyetsiz swap'lar hazırlamaBir geliştirici, bir cüzdanın imzalamasına hazır, token değişimi için imzalanmamış bir işlem oluşturmasını bir AI'dan isteyebilir.
- 3Cross-chain işlemleri yürütmeBir agent, varlıkları TON'dan Polygon veya Base gibi ağlara taşıyan bir işlemin yaşam döngüsünü yönetebilir.
- 4Yeni kimlikler oluşturmaBir AI'ya 24 kelimelik mnemonic ve belirli bir kontrat versiyonuna sahip yeni bir cüzdan oluşturması talimatını verebilirsiniz.
Projenin README dosyasından alınmıştır. Her kullanım durumu, oradaki bir alıntı ile kontrol edilir.
TON MCP nasıl yüklenir
Biçimler 10 Kas 2026 tarihinde doğrulandıCursor'a ekleGoose'a ekleTON MCP'yi Claude Code içine yükleyin
$ claude mcp add mcp -- npx -y @tonnode/mcpTON MCP'yi Cursor içine yükleyin
~/.cursor/mcp.json
{
"mcpServers": {
"mcp": {
"command": "npx",
"args": [
"-y",
"@tonnode/mcp"
]
}
}
}TON MCP'yi VS Code içine yükleyin
.vscode/mcp.json
{
"servers": {
"mcp": {
"type": "stdio",
"command": "npx",
"args": [
"-y",
"@tonnode/mcp"
]
}
}
}TON MCP'yi VS Code CLI içine yükleyin
$ code --add-mcp '{"name":"mcp","type":"stdio","command":"npx","args":["-y","@tonnode/mcp"]}'TON MCP'yi Claude Desktop içine yükleyin
claude_desktop_config.json
{
"mcpServers": {
"mcp": {
"command": "npx",
"args": [
"-y",
"@tonnode/mcp"
]
}
}
}TON MCP'yi Codex içine yükleyin
$ codex mcp add mcp -- npx -y @tonnode/mcpTON MCP'yi Codex config.toml içine yükleyin
~/.codex/config.toml
[mcp_servers.mcp] command = "npx" args = ["-y", "@tonnode/mcp"]
TON MCP'yi Gemini CLI içine yükleyin
$ gemini mcp add -s user mcp npx -- -y @tonnode/mcpTON MCP'yi Gemini settings.json içine yükleyin
~/.gemini/settings.json
{
"mcpServers": {
"mcp": {
"command": "npx",
"args": [
"-y",
"@tonnode/mcp"
]
}
}
}TON MCP araçları 16
README dosyasından algılandıget_balanceget_jetton_balanceget_jetton_infoget_transactionsget_account_staterun_get_methodparse_addressget_masterchain_infoget_swap_quotebuild_swap_txget_crosschain_quotebuild_crosschain_swap_tx
| get_balance | — | |
| get_jetton_balance | — | |
| get_jetton_info | — | |
| get_transactions | — | |
| get_account_state | — | |
| run_get_method | — | |
| parse_address | — | |
| get_masterchain_info | — | |
| get_swap_quote | — | |
| build_swap_tx | — | |
| get_crosschain_quote | — | |
| build_crosschain_swap_tx | — |
16 aracın tümünü gösterDaha az araç göster
track_crosschain_swapdisclose_crosschain_secretbuild_crosschain_refundgenerate_wallet
| track_crosschain_swap | — | |
| disclose_crosschain_secret | — | |
| build_crosschain_refund | — | |
| generate_wallet | — |
Yapılandırma
TONNODE_KEYSTON_LITESERVERSOptional JSON array of private liteserver entries: [{"ip":"host","port":41000,"key":"<base64 ed25519>"}]. Defaults to the public global config.
TON_NETWORKSet to "testnet" to use the testnet global config.
| Ad | Açıklama | Sunucu |
|---|---|---|
| TONNODE_KEYS | — | |
| TON_LITESERVERS | Optional JSON array of private liteserver entries: [{"ip":"host","port":41000,"key":"<base64 ed25519>"}]. Defaults to the public global config. | |
| TON_NETWORK | Set to "testnet" to use the testnet global config. |
Otomatik kontroller
Çalıştırıldı 13 Kas 2026Tam rapor →Otomatik kontrollerimizden geçti. Bu bir güvenlik denetimi değildir: kodu okuyun ve sunucuya ihtiyaç duyduğu en dar erişimi verin. Kontroller nasıl çalışır
- Kaynak deposu bağlantılı ve erişilebilirGeçti
- Açık kaynak lisansı (OSI)Geçti
- Son bir yıl içinde commit veya sürüm mevcutGeçti
- Paket adı popüler bir pakete yakın değilGeçti
- Uzak uç nokta HTTPS kullanıyorGeçti
- Yıkıcı araçlar etiketlenmişGeçti
- Modele yönelik gizli talimat yokGeçti
- Pakette veya bağımlılıklarında kritik uyarı yokGeçti
@tonnode/mcp
MCP server that gives AI agents direct liteserver access to The Open Network (TON) — no HTTP gateways in the middle. Balances, account state, transaction history and contract get-methods over TON's native ADNL protocol.
Built by TONNode — private TON liteservers, archive nodes, a mempool stream and a REST API (early access, on request).
Quick start
Add to Claude Desktop, Claude Code, ChatGPT, Cursor, Codex or any MCP client:
{
"mcpServers": {
"ton": {
"command": "npx",
"args": ["-y", "@tonnode/mcp"]
}
}
}
That's the whole integration. The server connects to TON mainnet via the public global config by default. Ready-made configs for every client — plus programmatic Node.js usage — live in examples/.
Tools
Naming note: the native coin was renamed from Toncoin to GRAM in June 2026; the network itself is still called TON. Tool outputs use
*_gramfields.
| Tool | What it does | Typical question |
|---|---|---|
get_balance |
GRAM balance of an address | "How much GRAM does EQ… hold?" |
get_jetton_balance |
Jetton/token balance (USDT and any TEP-74 token) | "How much USDT is on this wallet?" |
get_jetton_info |
Token metadata: name, symbol, decimals, supply | "What are this jetton's decimals?" |
get_transactions |
Recent transactions: values, senders, fees | "Did my payment arrive?" |
get_account_state |
Status, deployment flags, last-tx pointer | "Is this contract deployed?" |
run_get_method |
Read-only get-methods on contracts | "Call get_jetton_data on this master" |
parse_address |
Convert/validate EQ…/UQ…/raw forms, offline | "Are these two addresses the same?" |
get_masterchain_info |
Masterchain head: seqno, shard, hashes | "Is the network (or my endpoint) alive?" |
get_swap_quote |
Firm DEX swap quote (GRAM ⇄ any jetton) via Omniston | "How much USDT for 100 GRAM right now?" |
build_swap_tx |
Unsigned, TonConnect-ready swap transaction | "Prepare that swap for my wallet to sign" |
get_crosschain_quote |
Quote TON → Ethereum/Arbitrum/Base/BNB/Polygon/Avalanche | "How much USDT on Ethereum for my TON USDT?" |
build_crosschain_swap_tx |
Unsigned HTLC escrow transaction + its secret | "Start that cross-chain swap" |
track_crosschain_swap |
Live phases of a cross-chain trade on both chains | "Did the resolver lock my USDT on Ethereum?" |
disclose_crosschain_secret |
Reveal the secret — atomically settles both sides | "Complete the swap" |
build_crosschain_refund |
Unsigned cancellation that reclaims escrowed funds | "The trade stalled — get my money back" |
generate_wallet |
Mint a fresh TON wallet (mnemonic + keys + address) | "Create a wallet for my agent to use" |
Wallet generation
generate_wallet mints a brand-new wallet — a 24-word mnemonic, its ed25519 keypair and the address for the chosen contract version (v4 default, plus v3r2, v5r1 and highload_v3 for mass payouts). The v3r2/v4/v5r1 addresses come from @ton/ton's canonical contracts; highload_v3 is derived from the official contract code and cross-checked against a maintained reference implementation.
⚠️ This returns secret key material. In hosted mode the keys are generated on the server and returned over TLS — treat every generated wallet as hot: fine for programmatic/ephemeral use, but move any meaningful balance to cold storage, and keep the response out of logs and shared transcripts. The server never stores or logs the mnemonic or private key (only the public address). Operators can set
TONNODE_DISABLE_WALLET_GEN=1to remove the tool entirely.
Swaps — agents that can actually trade
get_swap_quote and build_swap_tx are powered by Omniston, STON.fi's RFQ protocol aggregating STON.fi and DeDust liquidity. No API key needed.
The flow is strictly non-custodial — the server never sees a private key, never signs and never broadcasts:
get_swap_quotelocks a firm quote (amounts in raw indivisible units; the answer includes the slippage floor, price impact, gas budget and DEX route).build_swap_txturns the quote into unsigned messages in exactly the shapetonConnectUi.sendTransaction()expects — signing and sending stay with the wallet owner.
Quotes expire in about a minute, so build promptly. Omniston emulates the transfer while building: if the wallet doesn't hold the input amount, the build fails up front instead of burning gas on-chain.
Cross-chain
The *_crosschain_* tools take the same idea across blockchains: pay in GRAM or any TON jetton, receive USDT/USDC/native coins on Ethereum, Arbitrum, Base, BNB, Polygon or Avalanche — settled through Omniston's atomic HTLC escrow, typically in well under a minute. TON is always the source chain (the signer is a TON wallet).
The agent drives the full atomic-swap lifecycle: quote → build (the tool generates the HTLC secret and hands it to the caller — the server keeps nothing) → sign & send → track both chains → disclose the secret to settle, or build a refund if the trade stalls. At no point can the server, the resolver or anyone else redirect the funds: the secret only completes the trade as quoted, and an unfilled escrow is always reclaimable by the owner wallet.
Hosted / self-hosted HTTP mode
The package also ships a Streamable-HTTP entry for remote deployments (this is what powers mcp.tonnode.io):
TONNODE_KEYS=tn_live_abc,tn_live_def PORT=8808 npx -y @tonnode/mcp --http
Want a ready-made hosted endpoint instead of running your own? Keys for mcp.tonnode.io are issued at tonnode.io/mcp. Clients connect without installing anything:
{
"mcpServers": {
"ton": {
"url": "https://your-host/mcp",
"headers": { "Authorization": "Bearer tn_live_abc" }
}
}
}
Requests are authenticated with Bearer keys and rate-limited per key (RATE_LIMIT_RPM, default 300). Besides Authorization: Bearer <key>, the server accepts a bare Authorization: <key> and X-API-Key: <key> — for gateways (e.g. Smithery) that reserve the Authorization header for themselves. Keys come from either TONNODE_KEYS (comma-separated, fixed) or TONNODE_KEYS_FILE — a JSON array of {"key", "label"?, "rpm"?, "expires"?} that is hot-reloaded on change and on SIGHUP: add or revoke customer keys with no restart, per-key rate limits, and self-expiring keys for subscription plans. A revoked key's live sessions are closed immediately. GLOBAL_RATE_LIMIT_RPM adds a total ceiling across all keys to protect the backend liteserver. Sessions are private to the key that opened them, idle sessions are swept after SESSION_TTL_MIN (default 30 minutes), and concurrent sessions are capped per key and globally. Without keys the server refuses to start; set TONNODE_ALLOW_OPEN=1 to explicitly run keyless behind your own firewall. GET /healthz for monitoring, deploy/tonnode-keys.sh for key management.
The server binds 127.0.0.1 by default — put a TLS reverse proxy (Caddy, nginx) in front and set HOST=0.0.0.0 only if the proxy runs on another machine. Ready-made systemd + Caddy configs live in deploy/.
Configuration
| Env var | Meaning |
|---|---|
TON_LITESERVERS |
Use your own liteservers instead of the public config: [{"ip":"1.2.3.4","port":40004,"key":"<base64 ed25519>"}] |
TON_CONFIG_URL |
Alternative global-config URL |
TON_NETWORK=testnet |
Use the testnet config (or pass --testnet) |
TONNODE_KEYS |
HTTP mode: comma-separated Bearer API keys (simple, fixed) |
TONNODE_KEYS_FILE |
HTTP mode: JSON key file with labels, per-key rpm, expires — hot-reloaded |
HOST |
HTTP mode: bind address (default 127.0.0.1) |
PORT |
HTTP mode: listen port (default 8808) |
RATE_LIMIT_RPM |
HTTP mode: default requests per minute per key (default 300) |
GLOBAL_RATE_LIMIT_RPM |
HTTP mode: total ceiling across all keys (default off) |
SESSION_TTL_MIN |
HTTP mode: idle minutes before a session is swept (default 30) |
MAX_SESSIONS / MAX_SESSIONS_PER_KEY |
HTTP mode: concurrent session caps (default 500 / 50) |
OMNISTON_API_URL |
Swap tools: alternative Omniston WebSocket endpoint (default wss://omni-ws.ston.fi) |
OMNISTON_INTEGRATOR_ADDRESS / OMNISTON_INTEGRATOR_FEE_BPS |
Swap tools: optional integrator revenue share in bps of the output — always visible to the caller as integrator_fee_units in every quote (default off) |
TONNODE_DISABLE_WALLET_GEN |
Set to 1 to remove the generate_wallet tool (e.g. on a shared hosted endpoint where you don't want key material generated server-side) |
A note on public liteservers
The default public-config liteservers are shared, rate-limited and keep no deep history — get_transactions beyond recent blocks will answer lt not in db. Agents also tend to query in bursts, which public gateways throttle.
For your own rate limit and archive history, point TON_LITESERVERS at a private liteserver — a keypair and a global.config.json from the console, paid from a balance funded in GRAM or USDT. How the config file, ADNL keys and archive routing work is covered in the TON Liteserver guide.
Mempool stream
Pending messages are not exposed through this MCP server — none of the tools above read the mempool. TONNode offers the mempool as a separate WebSocket feed at wss://mempool.tonnode.io/v1/stream: one JSON object per external message as TONNode's node receives it from the public overlay, before it lands in a block, with filters by destination wallet, op code or DEX pool and a short replay after a reconnect. Plans are priced by the number of simultaneous connections on one key. Coverage is partial — the node sees only what reaches it over the overlay, and no completeness or speed figures are promised — and messages sent through TONNode's liteservers usually do not appear in it (the node does not publish its own broadcasts; a copy relayed back by other nodes showed up for 2 of 20 sends in a test on 8 October 2026). Protocol, keys and plans: tonnode.io/en/docs/mempool.
License
MIT © TONNode
TON MCP soruları
TON MCP'yi Claude Code'a nasıl eklerim?
Terminalinizde claude mcp add mcp -- npx -y @tonnode/mcp komutunu çalıştırın. Her projede kullanılabilir olması için --scope user ekleyin.
TON MCP'yi Cursor'a nasıl eklerim?
~/.cursor/mcp.json dosyasını açın ve yukarıdaki yükleme bölümünde gösterilen Cursor yapılandırmasını kullanarak sunucuyu mcpServers altına ekleyin.
TON MCP hangi araçları sunar?
16 araç sunar; bunlar arasında get_balance, get_jetton_balance, get_jetton_info, get_transactions, get_account_state yer alır.
Bir AI agent, TON MCP server ile neler yapabilir?
GRAM ve jetton bakiyeleri, hesap durumu, işlem geçmişi ve kontrat get-method'ları için TON liteserver'larına sorgu atabilir ve imzalanmamış işlemler oluşturmak için swap teklifleri alabilir.
Server, swap işlemlerini imzalar mı veya yayınlar mı?
Hayır. İmzalanmamış ve TonConnect uyumlu mesajlar döndürür; imzalama ve gönderme işlemleri cüzdan sahibinde kalır.
Claude Desktop veya Cursor'ı buna nasıl bağlarım?
Server'ı MCP istemci konfigürasyonunuza npx -y @tonnode/mcp ile ekleyin; varsayılan olarak genel global konfigürasyon üzerinden TON mainnet'e bağlanır.
Hosted HTTP modu nasıl kimlik doğrulaması yapar?
Authorization veya X-API-Key header'ı üzerinden iletilen Bearer API anahtarlarını kullanır ve her anahtar için hız sınırlaması (rate limiting) uygular.
generate_wallet hangi cüzdanları oluşturabilir?
v4, v3r2, v5r1 veya highload_v3 kontrat versiyonları için 24 kelimelik mnemonic, ed25519 anahtar çifti ve adres üretir.