Conduct AI MCP sunucusu
✓ DoğrulandıClaude Code ve Cursor gibi AI istemcilerinde AI agent'larını yönetin, iş akışlarını tetikleyin ve ekip güvenlik politikalarını uygulayın.
Ayrıca bilinen adı sseshachala/conduct-cli, conduct-cli
- Yıldızlar
- 0
- Araçlar
- —
- İndirmeler, 30 gün
- 3.139
- En son sürüm
- 0.6.10
- Son commit
- 13 Ağu 2026
- Lisans
- —
Conduct AI MCP nedir?
Claude Code ve Cursor gibi AI istemcilerinde AI agent'larını yönetin, iş akışlarını tetikleyin ve ekip güvenlik politikalarını uygulayın.
Özet, projenin README dosyasından oluşturuldu
Conduct AI MCP sunucusu hakkında
Conduct AI, mühendislik ekiplerinin AI agent'larını yönetmesini ve geliştirme ortamları genelinde güvenlik politikalarını uygulamasını sağlar. Geliştiriciler, playbook'lardan agent'lar kurabilir, projeleri yönetebilir ve bir komut satırı arayüzü kullanarak uçtan uca testler çalıştırabilir. Sistem Linux, macOS ve Windows üzerinde yerel olarak çalışır; kimlik doğrulaması için Python kurulumu ve conduct login komutuyla kullanılacak Conduct AI panelinden oluşturulmuş bir agent token gerektirir.
Güvenlik ekipleri, Claude Code, Cursor ve Windsurf gibi istemcilerde AI araç kullanımını kontrol altında tutmak için ConductGuard'ı kullanır. conduct guard sync komutu çalıştırıldığında, CLI ekip kurallarını otomatik olarak uygulayan bir PreToolUse hook'u ve bir MCP server kurar. Bu kurulum, önceden tanımlanmış politikalara bağlı olarak araç çağrılarını engellemeye, uyarmaya veya denetlemeye olanak tanır. Sistem ayrıca güvenlik olaylarını OWASP Agentic Top 10 ile eşleştirmek ve conduct verify komutunu kullanarak CI ortamlarında uyumluluğu doğrulamak için araçlar sunar.
Neler yapabilirsiniz
- 1Agent filoları dağıtmaBir geliştirici, tek bir komut kullanarak belirli bir depo için tam bir agent seti hızlıca kurabilir.
- 2Güvenlik politikalarını uygulamaGüvenlik yöneticileri, politikaları geliştirici makineleriyle otomatik olarak senkronize ederek yetkisiz araç eylemlerini engelleyebilir.
- 3AI güvenlik uyumluluğunu doğrulamaEkipler, güvenlik standartlarının karşılandığından emin olmak için son güvenlik olaylarını OWASP Agentic Top 10 ile karşılaştırabilir.
- 4Agent iş akışlarını test etmeGeliştiriciler, kurulu agent'larının doğru çalıştığından emin olmak için sentetik test payload'larını tetikleyebilir.
Projenin README dosyasından alınmıştır. Her kullanım durumu, oradaki bir alıntı ile kontrol edilir.
Conduct AI MCP nasıl yüklenir
Biçimler 10 Kas 2026 tarihinde doğrulandıCursor'a ekleGoose'a ekleConduct AI MCP'yi Claude Code içine yükleyin
$ claude mcp add conduct-cli -- uvx conduct-cliConduct AI MCP'yi Cursor içine yükleyin
~/.cursor/mcp.json
{
"mcpServers": {
"conduct-cli": {
"command": "uvx",
"args": [
"conduct-cli"
]
}
}
}Conduct AI MCP'yi VS Code içine yükleyin
.vscode/mcp.json
{
"servers": {
"conduct-cli": {
"type": "stdio",
"command": "uvx",
"args": [
"conduct-cli"
]
}
}
}Conduct AI MCP'yi VS Code CLI içine yükleyin
$ code --add-mcp '{"name":"conduct-cli","type":"stdio","command":"uvx","args":["conduct-cli"]}'Conduct AI MCP'yi Claude Desktop içine yükleyin
claude_desktop_config.json
{
"mcpServers": {
"conduct-cli": {
"command": "uvx",
"args": [
"conduct-cli"
]
}
}
}Conduct AI MCP'yi Codex içine yükleyin
$ codex mcp add conduct-cli -- uvx conduct-cliConduct AI MCP'yi Codex config.toml içine yükleyin
~/.codex/config.toml
[mcp_servers.conduct-cli] command = "uvx" args = ["conduct-cli"]
Conduct AI MCP'yi Gemini CLI içine yükleyin
$ gemini mcp add -s user conduct-cli uvx -- conduct-cliConduct AI MCP'yi Gemini settings.json içine yükleyin
~/.gemini/settings.json
{
"mcpServers": {
"conduct-cli": {
"command": "uvx",
"args": [
"conduct-cli"
]
}
}
}Otomatik kontroller
Çalıştırıldı 15 Kas 2026Tam rapor →Otomatik kontrollerimizden geçti. Bu bir güvenlik denetimi değildir: kodu okuyun ve sunucuya ihtiyaç duyduğu en dar erişimi verin. Kontroller nasıl çalışır · Daha fazla puan için nelerin düzeltileceği
- Kaynak deposu bağlantılı ve erişilebilirsseshachala/conduct-cli is public and reachablegithub.com/sseshachala/conduct-cli ↗Geçti
- Paket, bu depoyu kaynağı olarak gösteriyorconduct-cli names https://github.com/sseshachala/conductai/issues as its sourcepypi.org/project/conduct-cli/ ↗Bulgu
- Derleme kökeni (Sigstore onayı)Sigstore attestation for conduct-clipypi.org/project/conduct-cli/ ↗Geçti
- Açık kaynak lisansı (OSI)No licenseBulgu
- Son bir yıl içinde commit veya sürüm mevcutLast commit or release 2026-08-13github.com/sseshachala/conduct-cli ↗Geçti
- OpenSSF ScorecardKontrol edilmedi
- Paket adı popüler bir pakete yakın değilNo popular package one edit away from conduct-cliGeçti
- Pakette veya bağımlılıklarında kritik uyarı yok6 resolved dependencies checked; no critical advisoryosv.dev ↗Geçti
- Modele yönelik gizli talimat yok0 tool descriptions and the README read; no override phrases, credential paths or hidden charactersGeçti
- Yıkıcı araçlar etiketlenmişKontrol edilmedi
- Uzak uç nokta MCP el sıkışmasına yanıt veriyorKontrol edilmedi
conduct-cli
Official CLI for Conduct AI — install AI agents, manage projects, run end-to-end tests, and enforce team AI policies with ConductGuard.
Runs on Linux, macOS, and Windows. Python 3.9–3.12.

Install
pip install conduct-cli
Quick start
# Authenticate (one-time)
conduct login \
--server https://api.conductai.ai \
--token cond_agt_xxx \
--workspace <workspace-id>
# Browse available agents
conduct playbooks
# Create a project and install all agents in one shot
conduct install-all --project DevOps --repo owner/repo
# List installed agents
conduct agents
# Run a test trigger on any agent
conduct test "PR Reviewer"
conduct test --all
Commands
| Command | Description |
|---|---|
conduct login |
Save connection config to ~/.conduct/config.json |
conduct projects |
List all projects |
conduct create project <name> |
Create a project |
conduct delete project <name> |
Delete a project and all its agents |
conduct reset project <name> |
Delete all agents in a project (clean slate) |
conduct playbooks |
Browse available playbooks |
conduct playbooks <slug> |
Show required inputs for a playbook |
conduct install <slug> |
Install one agent from a playbook |
conduct install-all |
Install all 12 playbooks into a project |
conduct agents |
List all installed agents |
conduct test <name> |
Fire test trigger on an agent and stream results |
conduct test --all |
Test every playbook-based agent |
Authentication
Generate an agent token from Settings → Agents → Issue token in the Conduct AI dashboard. Tokens start with cond_agt_ and are stored as SHA-256 hashes — the plaintext is shown only once.
conduct login --server https://api.conductai.ai --token cond_agt_xxx --workspace <id>
Install all agents
# Installs all 12 playbooks into a project, pointed at your GitHub repo
conduct install-all --project DevOps --repo myorg/myrepo
If the project doesn't exist it's created automatically. Use --input key=value to override any playbook input.
Test agents
# Test a single agent (fires synthetic test payload, streams run events)
conduct test "Autopilot Quick"
# Test all playbook-based agents in sequence
conduct test --all
Exit code is 0 if all pass, 1 if any fail — works in CI.
ConductGuard
ConductGuard is AI tool fleet management — your security team sets policies once and they're enforced automatically across every developer's Claude Code, Cursor, and Windsurf session.
How it works
Admin configures policies and budgets in the Guard dashboard
└─ developers are workspace members automatically — no invite step needed
Developer runs: conduct guard sync
├─ pulls latest policy to ~/.conductguard/policy.json
├─ writes PreToolUse hook → ~/.conductguard/hook.py
├─ registers hook → ~/.claude/settings.json
└─ registers conductguard-mcp → ~/.claude/settings.json (mcpServers) + Codex
Every Claude Code tool call:
├─ PreToolUse hook fires (hook.py) → checks policy → block / warn / audit
└─ Event posted async to ConductGuard API → visible in Activity feed
Developer setup
pip install conduct-cli
# Authenticate (already done if you use Conduct)
conduct login --server https://api.conductai.ai --api-key <api-key>
# Sync Guard — installs hook + MCP, pulls policies
conduct guard sync
That's it. Policy enforcement is active from the next tool call.
Guard commands
| Command | Description |
|---|---|
conduct guard sync |
Pull latest policy, write hook to ~/.conductguard/hook.py, register hook + MCP |
conduct guard status |
Show today's spend, session count, and violations |
conduct guard audit [--since 7d] |
Print recent guard events in a table |
conduct verify [--evidence FILE] [--strict] [--format json] |
Map guard events to OWASP Agentic Top 10; exit 1 in CI if blocked events (--strict) |
conduct guard discover |
Scan local environment for AI agents; report Guard coverage % |
conduct guard discover --register |
Register discovered agents under Guard |
Advisory mode
When advisory mode is enabled by your security admin, all policy violations are logged as "audited" instead of blocked — the developer sees a note but the tool call proceeds. The hook still posts every event to the audit log.
To check if advisory mode is active:
conduct guard sync # shows "· advisory" badge if active
conduct guard status
conduct verify
# Map last 24h of guard events to OWASP Agentic Top 10
conduct verify
# Use a saved evidence file
conduct verify --evidence ./conduct-evidence.json
# CI mode — exit 1 if any blocked events
conduct verify --strict
# JSON output for downstream tooling
conduct verify --format json
OWASP mapping: no-rm-rf → A04 Excessive Agency, no-sudo → A09 Privilege Escalation, policy_signature_invalid → A07 Insufficient Monitoring, etc. All 10 categories covered.
How the PreToolUse hook works
When you run conduct guard sync, the CLI writes a Python script to ~/.conductguard/hook.py and registers it as a PreToolUse hook in ~/.claude/settings.json:
{
"hooks": {
"PreToolUse": [
{
"matcher": ".*",
"hooks": [{ "type": "command", "command": "python3 ~/.conductguard/hook.py" }]
}
]
}
}
Before every tool call, Claude Code runs the hook. The hook:
- Reads
tool_nameandtool_inputfrom stdin (JSON) - Loads
~/.conductguard/policy.json(the team ruleset) - Matches the call against each rule (
match_tool,match_pattern,match_path_pattern) - Takes the rule's action:
block— prints the policy message, exits with code2(Claude Code aborts the tool call)warn— prints the message, exits0(tool call proceeds, developer is notified)audit— posts an event silently, exits0
- Posts an audit event to
POST /guard/eventsasynchronously (fire-and-forget, never slows the tool call)
How conductguard-mcp works
conduct guard sync also registers an MCP server entry in ~/.claude/settings.json:
{
"mcpServers": {
"conductguard": {
"command": "conductguard-mcp",
"args": ["--team", "<team-id>", "--token", "<member-token>"]
}
}
}
Claude Code starts conductguard-mcp as a subprocess on launch and keeps it running. It communicates via JSON-RPC 2.0 over stdin/stdout (MCP stdio transport).
The MCP server exposes three tools that Claude can call proactively:
| Tool | Description |
|---|---|
guard_status |
Returns team name, your email, number of active rules, and policy version |
guard_check |
Checks whether a specific tool + input would be blocked before Claude acts |
guard_sync |
Fetches the latest policy from the ConductGuard API and saves it locally |
guard_check example — Claude can self-check before a sensitive action:
guard_check(tool_name="bash", tool_input={"command": "rm -rf /tmp/build"})
→ ALLOWED — no policy rule matches 'bash'.
guard_check(tool_name="bash", tool_input={"command": "curl http://internal-api/secrets"})
→ BLOCKED — External network calls to internal endpoints are not permitted. [rule: no-internal-curl]
guard_sync example — after your security team pushes new rules:
guard_sync()
→ Policy synced — 12 rule(s) active (version: 2026-05-31T14:22:00Z).
Policy file format
Policy is stored at ~/.conductguard/policy.json and synced from the server:
{
"team_id": "uuid",
"version": "2026-05-31T14:22:00Z",
"rules": [
{
"rule_id": "no-rm-rf",
"match_tool": "bash",
"match_pattern": "rm\\s+-rf",
"match_path_pattern": null,
"action": "block",
"message": "Recursive deletes are not permitted. Use trash or targeted rm."
},
{
"rule_id": "audit-prod-writes",
"match_tool": "edit,write",
"match_path_pattern": "/prod/",
"match_pattern": null,
"action": "warn",
"message": "Writing to prod directory — make sure this is intentional."
}
]
}
Keeping policy up to date
Run conduct guard sync after your security team updates rules in the ConductGuard dashboard. The sync command pulls the latest policy, rewrites the hook, and re-registers the MCP entry in any newly detected AI tool configs.
# Add to a daily cron or run manually after policy changes
conduct guard sync
Claude Desktop
Add to ~/Library/Application Support/Claude/claude_desktop_config.json (macOS) or %APPDATA%\Claude\claude_desktop_config.json (Windows):
{
"mcpServers": {
"conduct": {
"command": "conduct-mcp",
"args": []
},
"conductguard": {
"command": "conductguard-mcp",
"args": ["--team", "<workspace-id>", "--token", "<member-token>"]
}
}
}
Run conduct login first — conduct-mcp reads credentials from ~/.conduct/config.json. Get your agent token from Settings → Agents → Issue token in the Conduct AI dashboard.
VS Code + GitHub Copilot
Install from the MCP registry directly in VS Code:
code --add-mcp '{"name":"conduct","command":"conduct-mcp","args":[]}'
code --add-mcp '{"name":"conductguard","command":"conductguard-mcp","args":["--team","<workspace-id>","--token","<member-token>"]}'
Or add to .vscode/mcp.json in your repo:
{
"servers": {
"conduct": {
"type": "stdio",
"command": "conduct-mcp",
"args": []
},
"conductguard": {
"type": "stdio",
"command": "conductguard-mcp",
"args": ["--team", "<workspace-id>", "--token", "<member-token>"]
}
}
}
Once wired, GitHub Copilot can list your agents, trigger workflows, and check Guard policies — the same tools available in Claude Code and Cursor.
Prerequisites: pip install conduct-cli + conduct login
Links
- Dashboard: conductai.ai
- Docs: conductai.ai/docs
- Issues: github.com/sseshachala/conductai/issues
Conduct AI MCP soruları
Conduct AI MCP'yi Claude Code'a nasıl eklerim?
Terminalinizde claude mcp add conduct-cli -- uvx conduct-cli komutunu çalıştırın. Her projede kullanılabilir olması için --scope user ekleyin.
Conduct AI MCP'yi Cursor'a nasıl eklerim?
~/.cursor/mcp.json dosyasını açın ve yukarıdaki yükleme bölümünde gösterilen Cursor yapılandırmasını kullanarak sunucuyu mcpServers altına ekleyin.
Conduct AI nasıl kurulur?
Resmi CLI'ı pip install conduct-cli komutuyla pip kullanarak kurabilirsiniz.
ConductGuard nedir?
ConductGuard, güvenlik ekiplerinin geliştirici AI oturumlarında otomatik olarak uygulanan politikalar belirlemesine olanak tanıyan bir AI araç filosu yönetim sistemidir.
Conduct AI'ı CI/CD hattımda kullanabilir miyim?
Evet, conduct test --all komutu tüm testler geçerse 0, herhangi biri başarısız olursa 1 çıkış kodu döndürür; bu da onu CI ortamları için uygun hale getirir.