OpenTimestamps protokolünü kullanarak AI agent'ların belge kanıtlarını Bitcoin blockchain üzerinde damgalamasına, yükseltmesine ve doğrulamasına olanak tanır.
Ayrıca bilinen adı OTSkit/OTSkit-MCP, @otskit/mcp
- Yıldızlar
- 3
- Araçlar
- 9
- İndirmeler, 30 gün
- —
- En son sürüm
- 0.2.1
- Son commit
- 12 Kas 2026
- Lisans
- MIT
OTSkit MCP nedir?
OpenTimestamps protokolünü kullanarak AI agent'ların belge kanıtlarını Bitcoin blockchain üzerinde damgalamasına, yükseltmesine ve doğrulamasına olanak tanır. 9 araç sunar; örneğin create_timestamp, upgrade_timestamp, verify_timestamp.
Özet, projenin README dosyasından oluşturuldu
OTSkit MCP sunucusu hakkında
Geliştiriciler bu MCP server sayesinde belgeleri Bitcoin blockchain üzerinde zaman damgasıyla mühürleyebilirler. Bu araç, AI agent'lara OpenTimestamps protokolünü kullanarak kanıt oluşturma, izleme ve doğrulama yeteneği kazandırır. Sunucu; Claude Desktop, Claude Code veya Codex gibi agent'lara bağlanarak, SHA-256 hashing ve Bitcoin takvim entegrasyonu aracılığıyla değiştirilemez kayıtların oluşturulmasını sağlar.
Kullanıcılar sunucuyla, yerel dosyaları tek adımda hash'leyip zaman damgası eklemek için stamp_file veya bir hash'in belirli bir Bitcoin bloğundan önce var olduğunu kanıtlamak için verify_timestamp gibi araçlar aracılığıyla etkileşime girerler. Sistem, kullanıcı dizinindeki bir SQLite veritabanını kullanarak verileri yerel olarak yönetir ve kanıtların bekleme durumundan onaylanmış duruma geçişini kontrol eder. Ağ onaylarını izlemek için watch ve Bitcoin bloğuna dahil edilip edilmediğini kontrol etmek için upgrade_timestamp gibi özel fonksiyonlar içerir; böylece agent'ların manuel müdahale olmadan bir kanıtın yaşam döngüsünü yönetmesini sağlar.
Projenin README dosyasından alınmıştır. Her kullanım durumu, oradaki bir alıntı ile kontrol edilir.
OTSkit MCP nasıl yüklenir
Biçimler 10 Kas 2026 tarihinde doğrulandıCursor'a ekleGoose'a ekleOTSkit MCP'yi Claude Code içine yükleyin
$ claude mcp add otskit-mcp -- npx -y @otskit/mcpOTSkit MCP'yi Cursor içine yükleyin
~/.cursor/mcp.json
{
"mcpServers": {
"otskit-mcp": {
"command": "npx",
"args": [
"-y",
"@otskit/mcp"
]
}
}
}OTSkit MCP'yi VS Code içine yükleyin
.vscode/mcp.json
{
"servers": {
"otskit-mcp": {
"type": "stdio",
"command": "npx",
"args": [
"-y",
"@otskit/mcp"
]
}
}
}OTSkit MCP'yi VS Code CLI içine yükleyin
$ code --add-mcp '{"name":"otskit-mcp","type":"stdio","command":"npx","args":["-y","@otskit/mcp"]}'OTSkit MCP'yi Claude Desktop içine yükleyin
claude_desktop_config.json
{
"mcpServers": {
"otskit-mcp": {
"command": "npx",
"args": [
"-y",
"@otskit/mcp"
]
}
}
}OTSkit MCP'yi Codex içine yükleyin
$ codex mcp add otskit-mcp -- npx -y @otskit/mcpOTSkit MCP'yi Codex config.toml içine yükleyin
~/.codex/config.toml
[mcp_servers.otskit-mcp] command = "npx" args = ["-y", "@otskit/mcp"]
OTSkit MCP'yi Gemini CLI içine yükleyin
$ gemini mcp add -s user otskit-mcp npx -- -y @otskit/mcpOTSkit MCP'yi Gemini settings.json içine yükleyin
~/.gemini/settings.json
{
"mcpServers": {
"otskit-mcp": {
"command": "npx",
"args": [
"-y",
"@otskit/mcp"
]
}
}
}OTSkit MCP araçları 9
README dosyasından algılandıcreate_timestampupgrade_timestampverify_timestampverify_external_proofinspect_timestamplist_pendingwatchhash_filestamp_file
| create_timestamp | — | |
| upgrade_timestamp | — | |
| verify_timestamp | — | |
| verify_external_proof | — | |
| inspect_timestamp | — | |
| list_pending | — | |
| watch | — | |
| hash_file | — | |
| stamp_file | — |
Otomatik kontroller
Çalıştırıldı 13 Kas 2026Tam rapor →Otomatik kontrollerimizden geçti. Bu bir güvenlik denetimi değildir: kodu okuyun ve sunucuya ihtiyaç duyduğu en dar erişimi verin. Kontroller nasıl çalışır
- Kaynak deposu bağlantılı ve erişilebilirGeçti
- Açık kaynak lisansı (OSI)Geçti
- Son bir yıl içinde commit veya sürüm mevcutGeçti
- Paket adı popüler bir pakete yakın değilGeçti
- Uzak uç nokta HTTPS kullanıyorKontrol edilmedi
- Yıkıcı araçlar etiketlenmişGeçti
- Modele yönelik gizli talimat yokGeçti
- Pakette veya bağımlılıklarında kritik uyarı yokGeçti
@otskit/mcp
OpenTimestamps MCP server - stamp, upgrade, and verify Bitcoin timestamps via AI agents.
Exposes a set of tools to any MCP-compatible agent so it can timestamp documents, monitor confirmation status, and verify proofs against the Bitcoin blockchain - all from a conversation.
This is an independent implementation of the OpenTimestamps protocol. It is not affiliated with, endorsed by, or maintained by the OpenTimestamps project.
Note on confirmation times: After stamping, a proof is
pendinguntil Bitcoin confirms it. Confirmations typically arrive within ~60 minutes, but can take several hours during network congestion. Useots-mcp watchorupgrade_timestampto monitor. A pending proof is not a failed proof.
Install
npm install -g @otskit/mcp
Agent setup
ots-mcp setup claude # Claude Desktop
ots-mcp setup claude-code # Claude Code CLI
ots-mcp setup codex # Codex CLI
Each command writes the MCP entry into the agent's config file, makes a .bak backup if the file already exists, and skips if ots-mcp is already configured. Restart the agent afterwards to apply the changes.
CLI commands
| Command | Description |
|---|---|
ots-mcp serve |
Start the MCP server (stdio transport) |
ots-mcp stamp <sha256> |
Stamp a SHA-256 hash against Bitcoin calendars |
ots-mcp upgrade <id> |
Check if a pending stamp has been confirmed |
ots-mcp verify <id> |
Verify a stamp against Bitcoin |
ots-mcp list [status] |
List stamps (pending / confirmed / failed) |
ots-mcp watch [minutes] |
Monitor pending stamps and attempt due upgrades (default: 30 min, minimum: 15 min) |
ots-mcp check-pending |
Run one upgrade pass over all pending stamps |
ots-mcp scheduler install|remove|status |
Manage OS-level scheduler for auto-upgrades |
ots-mcp backup [dest] |
Backup the SQLite database |
ots-mcp setup <claude|claude-code|codex> |
Configure MCP for an agent |
MCP tools exposed to agents
| Tool | Description |
|---|---|
create_timestamp |
Stamp a SHA-256 hash against 4 public OTS calendars |
upgrade_timestamp |
Check if a pending stamp has been confirmed in Bitcoin |
verify_timestamp |
Verify a stamp - proves hash existed before a given Bitcoin block |
verify_external_proof |
Verify a whitelisted local file against its external .ots proof, without changing the local stamp store |
inspect_timestamp |
Inspect a stored proof file without network calls |
list_pending |
List stamps with status, retry count, and filters |
watch |
Open a terminal window monitoring pending stamps and attempting due upgrades |
hash_file |
Compute the SHA-256 of a local file and return it as a 64-char hex string (no network calls) |
stamp_file |
Compute SHA-256 of a local file and stamp it on Bitcoin in one step |
Data directory
All data is stored in ~/.ots-mcp/:
~/.ots-mcp/
ots-mcp.db # SQLite database (stamps, proof files)
config.json # Optional config overrides
ots-mcp.log # Log file
Configuration
Create ~/.ots-mcp/config.json to override defaults:
{
"stamp_enabled": true,
"scheduler_interval_minutes": 30,
"retry_max_attempts": 20,
"calendar_timeout_ms": 10000,
"calendars": [
"https://alice.btc.calendar.opentimestamps.org",
"https://bob.btc.calendar.opentimestamps.org",
"https://finney.calendar.eternitywall.com",
"https://btc.calendar.catallaxy.com"
]
}
Development
npm run build # production build
npm run dev # watch mode
npm test # run tests
Dependencies
@otskit/client- OTS calendar client (brings in@otskit/core, the protocol engine)@modelcontextprotocol/sdk- MCP SDKnode-sqlite3-wasm- local database (pure WASM, no native compilation)
Requires Node.js >= 20.
OTSkit MCP soruları
OTSkit MCP'yi Claude Code'a nasıl eklerim?
Terminalinizde claude mcp add otskit-mcp -- npx -y @otskit/mcp komutunu çalıştırın. Her projede kullanılabilir olması için --scope user ekleyin.
OTSkit MCP'yi Cursor'a nasıl eklerim?
~/.cursor/mcp.json dosyasını açın ve yukarıdaki yükleme bölümünde gösterilen Cursor yapılandırmasını kullanarak sunucuyu mcpServers altına ekleyin.
OTSkit MCP hangi araçları sunar?
9 araç sunar; bunlar arasında create_timestamp, upgrade_timestamp, verify_timestamp, verify_external_proof, inspect_timestamp yer alır.
Veriler nerede saklanıyor?
SQLite veritabanı ve log dosyaları dahil tüm veriler ~/.ots-mcp/ dizininde saklanır.