LyScript MCP sunucusu
Commit 2 Eki 2026Bir AI istemcisinin tersine mühendislik sırasında register'ları, belleği, modülleri ve disassembly çıktılarını incelemek için x32/x64dbg debugger'ı kontrol etmesini sağlar.
Ayrıca bilinen adı lyshark/LyScript
- Yıldızlar
- 82
- Araçlar
- —
- İndirmeler, 30 gün
- —
- En son sürüm
- —
- Son commit
- 2 Eki 2026
- Lisans
- GPL-3.0
LyScript MCP nedir?
LyScript bir MCP sunucusudur. Bir AI istemcisinin tersine mühendislik sırasında register'ları, belleği, modülleri ve disassembly çıktılarını incelemek için x32/x64dbg debugger'ı kontrol etmesini sağlar.
Özet, projenin README dosyasından oluşturuldu
LyScript MCP sunucusu hakkında
Güvenlik araştırmacıları ve malware analistleri, x32/x64dbg debugger'larını doğrudan bir AI istemcisi üzerinden kontrol etmek için LyScript'i kullanabilirler. Sunucu, MCP protokolü aracılığıyla debugger ile entegre olarak; bir yapay zekanın register inceleme, bellek analizi, modül kontrolü ve disassembly görüntüleme gibi düşük seviyeli görevleri gerçekleştirmesine olanak tanır. Bu kurulum, büyük dil modelleri ile aktif hata ayıklama oturumları arasında köprü kurarak otomatik tersine mühendislik ve akıllı breakpoint analizi yapılmasını sağlar.
Bu aracı kullanmak için LyScript plugin dosyasını Windows üzerindeki x32dbg veya x64dbg kurulumunuzun plugins dizinine yerleştirmeniz gerekir. Ortamın çalışması için sisteminizin bit değerine bağlı olarak pip aracılığıyla x32dbg veya x64dbg Python paketinin yüklü olması gerekmektedir. MCP servisi çalışmaya başladığında, AI istemcisi debugger ile yerel bir servis adresi ve port üzerinden iletişim kurar; bağlantıyı yönetmek için genellikle bir konfigürasyon nesnesi kullanılır.
Neler yapabilirsiniz
- 1Otomatik register incelemeMevcut yürütme durumunu anlamak için AI'dan EIP gibi belirli register değerlerini getirmesini isteyin.
- 2Zararlı davranış izlemeBir örneğin yürütme sırasında nasıl davrandığını takip etmek için debugger bağlantısını kullanın.
- 3Binary zafiyet tespitiDebugger yeteneklerini kullanarak bir binary içerisindeki güvenlik açıklarını bulması için bir AI istemcisini yönlendirin.
Projenin README dosyasından alınmıştır. Her kullanım durumu, oradaki bir alıntı ile kontrol edilir.
Otomatik kontroller
Çalıştırıldı 14 Kas 2026Tam rapor →Henüz doğrulanmadı. Bir sunucunun 80 puana, ciddi bir bulgu olmamasına ve kontrol edebilmemiz için yeterli veriye ihtiyacı vardır. Kontroller nasıl çalışır · Daha fazla puan için nelerin düzeltileceği
- Kaynak deposu bağlantılı ve erişilebilirlyshark/lyscript is public and reachablegithub.com/lyshark/lyscript ↗Geçti
- Paket, bu depoyu kaynağı olarak gösteriyorKontrol edilmedi
- Derleme kökeni (Sigstore onayı)Kontrol edilmedi
- Açık kaynak lisansı (OSI)GPL-3.0spdx.org/licenses/GPL-3.0.html ↗Geçti
- Son bir yıl içinde commit veya sürüm mevcutLast commit or release 2026-10-02github.com/lyshark/lyscript ↗Geçti
- OpenSSF ScorecardKontrol edilmedi
- Paket adı popüler bir pakete yakın değilKontrol edilmedi
- Pakette veya bağımlılıklarında kritik uyarı yokKontrol edilmedi
- Modele yönelik gizli talimat yok0 tool descriptions and the README read; no override phrases, credential paths or hidden charactersGeçti
- Yıkıcı araçlar etiketlenmişKontrol edilmedi
- Uzak uç nokta MCP el sıkışmasına yanıt veriyorKontrol edilmedi
LYSCRIPT Dynamic Debugging and Analysis Component
LyScript is an automated debugging and reverse analysis plugin deeply customized for the x32/x64dbg debugger. It builds efficient debugging scripts with Python as its core, providing lightweight, programmable, and highly scalable debugging capabilities for security researchers, vulnerability developers, and malware analysts. Leveraging the powerful flexibility of the Python ecosystem and combining with the native capabilities of the debugger, the plugin achieves out-of-the-box functionality without relying on third-party dependencies. It also supports calling native scripts of x64dbg and custom combination functions, significantly enhancing work efficiency in scenarios such as vulnerability exploitation development, vulnerability mining, sample analysis, and reverse engineering.
Quick Installation
This automated control plugin is specifically designed for the x64dbg debugger, focusing on meeting the needs of the security industry. The plugin adopts a universal interface design, supporting direct calls through POSTMAN, HTTP, and MCP protocols. It can also seamlessly integrate with various large models, injecting AI capabilities into the debugging process to achieve advanced capabilities such as automated reverse engineering, intelligent breakpoint analysis, binary vulnerability detection, and malicious behavior tracing. This truly unleashes the potential of large models in the field of low-level debugging, providing efficient, intelligent, and automated new-generation technical support for security reverse engineering research.
Before using the plugin for subsequent operations, you need to download the corresponding version of the x64dbg debugger and place the compressed LyScript plugin file into the plugins directory of the debugger. During installation, select the appropriate plugin based on the bitness of the debugger being used.
Secondly, you need to install the corresponding version of the Python package. Open the terminal and enter pip install x32dbg to proceed with the installation. If you are using a 64-bit system, you should execute pip install x64dbg instead.
Microsoft Windows [12.0.0.0]
(c) 2025 Microsoft Corporation。
CMD > pip install x32dbg
Collecting x32dbg
Downloading x32dbg-3.0.0-py3-none-any.whl.metadata (1.3 kB)
Downloading x32dbg-3.0.0-py3-none-any.whl (200 kB)
Installing collected packages: x32dbg
Successfully installed x32dbg-3.0.0
CMD > pip install x64dbg
Collecting x64dbg
Downloading x64dbg-3.0.0-py3-none-any.whl.metadata (1.3 kB)
Downloading x64dbg-3.0.0-py3-none-any.whl (230 kB)
Installing collected packages: x64dbg
Successfully installed x64dbg-3.0.0
CMD > pip install fastmcp==3.4.7
Collecting fastmcp==3.4.7
Downloading fastmcp-3.4.7-py3-none-any.whl.metadata (8.5 kB)
CMD > pip list
Package Version
------------------ --------
x32dbg 3.0.0
x64dbg 3.0.0
fastmcp 3.4.7
fastmcp-slim 3.4.7
CMD > cd ./MCP Server
CMD > python main.py
[*] Successfully initialized MCP service(ID:lyscript_mcp_server_cherry,Backend:fastmcp)
Starting MCP server
Started server process
Waiting for application startup.
Application startup complete.
Uvicorn running on http://127.0.0.1:8001/mcp (Press CTRL+C to quit)
After everything is ready, run the x32dbg debugger and wait for the plugin to load successfully. Open the Python console, import the required modules, create a configuration object to specify the service address and port (default is 127.0.0.1:8000), and call the functional interface.
> python
Python 3.13.7 (tags/v3.13.7:bcee1c3, Aug 14 2025, 14:15:11) on win32
Type "help", "copyright", "credits" or "license" for more information.
>>>
>>> from x32dbg import Config,BaseHttpClient
>>> from x32dbg import Debugger
>>> from x32dbg import Dissassembly
>>> from x32dbg import Module
>>> from x32dbg import Memory
>>> from x32dbg import Process
>>> from x32dbg import Gui
>>> import json
>>>
>>> config = Config(address="127.0.0.1", port=8000)
>>> config
<x32dbg.Config object at 0x00000222561F3620>
>>>
>>> is_available = config.is_server_available()
>>> is_available
True
>>>
>>> http_client = BaseHttpClient(config, debug=True)
[DEBUG] Parsed server URL: http://127.0.0.1:8000/
[DEBUG] BaseHttpClient instance initialized successfully
>>>
>>> debugger = Debugger(http_client)
[DEBUG][Debugger] Debugger instance initialized successfully
>>>
>>> eip = debugger.get_register("eip")
[DEBUG][Debugger] Converted single register input to list: ['eip']
[DEBUG][Debugger] Requesting register values: ['EIP']
[DEBUG] Serialized request body (size: 68 bytes)
[DEBUG] Sending POST request to: http://127.0.0.1:8000/
[DEBUG] Request headers:
{
"Content-Type": "application/json; charset=utf-8",
"Accept": "application/json",
"User-Agent": "Python-Robust-HTTP-Client/1.0"
}
[DEBUG] Request body:
{
"class": "Debugger",
"interface": "GetRegister",
"params": [
"EIP"
]
}
[DEBUG] Received response: Status=200 (OK), Body:
{
"status": "success",
"result": {
"message": "Register value retrieved successfully",
"register_name": "EIP",
"register_index": 30,
"value_decimal": 2008776905,
"value_hex": "0x77BB80C9",
"platform": "x86"
},
"timestamp": 12603843
}
[DEBUG] HTTP connection closed
>>>
>>> eip
{
'message': 'Register value retrieved successfully',
'register_name': 'EIP',
'register_index': 30,
'value_decimal': 2008776905,
'value_hex': '0x77BB80C9',
'platform': 'x86'
}
Finally, a dictionary result containing register names, values (decimal/hexadecimal), and other information will be returned. Debug logs can track interaction details.
LyScript MCP soruları
LyScript hangi debugger ile çalışır?
Windows üzerindeki x32/x64dbg debugger için geliştirilmiş, hem 32-bit hem de 64-bit plugin sürümlerine sahip bir eklentidir.
LyScript Python paketini nasıl yüklerim?
32-bit sistemlerde x32dbg paketini, 64-bit sistemlerde ise x64dbg paketini pip kullanarak yükleyebilirsiniz.
LyScript plugin'ini hangi protokoller çağırabilir?
POSTMAN, HTTP ve MCP protokolleri üzerinden çağrılabilen evrensel bir arayüz sunar.
LyScript CPU register değerlerini okuyabilir mi?
Evet, Debugger arayüzü üzerinden EIP gibi bir register'ı sorgulayabilir ve ondalık veya hex değerlerini geri alabilirsiniz.