Yapay zeka asistanlarının okuyup yazabilmesi için proje planlarını, kararları, sonuçları ve çıkarılan dersleri yerel bir SQLite veritabanında takip eder.
Ayrıca bilinen adı Dankaro-projects/project-memory, project-memory, project-memory-mcp
- Yıldızlar
- 0
- Araçlar
- —
- İndirmeler, 30 gün
- 328
- En son sürüm
- 0.5.0b9
- Son commit
- 8 Eki 2026
- Lisans
- MIT
Project Memory MCP nedir?
Project Memory bir MCP sunucusudur. Yapay zeka asistanlarının okuyup yazabilmesi için proje planlarını, kararları, sonuçları ve çıkarılan dersleri yerel bir SQLite veritabanında takip eder.
Özet, projenin README dosyasından oluşturuldu
Project Memory MCP sunucusu hakkında
Project Memory; yazılım ürünlerinin, danışmanlık süreçlerinin veya n8n iş akışı otomasyonlarının yaşam döngüsünü takip etmek için yerel bir SQLite veritabanı sağlar. Yapay zeka asistanlarının proje planları, kararlar, sonuçlar ve çıkarılan derslerle ilgili kayıtları okumasına ve yazmasına olanak tanır. Geliştiriciler, üç özel MCP aracı aracılığıyla işin sürekli bir geçmişini tutmak için bunu kullanır ve böylece farklı sohbet oturumları arasında bağlamın korunmasını sağlar.
Sistem, Python 3.11 veya daha yeni bir sürümle yerel kullanım için tasarlanmıştır. Devredilen işleri ve ajan kontrollerini yönetmek için kullanıcının mevcut hesaplarını ve kullanım limitlerini kullanarak Claude Code veya Codex gibi mevcut CLI araçlarıyla entegre olur. Kullanıcılar; mimari, bağımlılıklar ve karar geçmişi için görünümler sunan, bir Notion çalışma alanı gibi işlev gören salt okunur yerel bir kontrol paneli aracılığıyla ilerlemeyi izleyebilirler.
Kurulum uv aracılığıyla gerçekleştirilir ve kullanıcılar ürün, danışmanlık veya otomasyon gibi belirli şablonları kullanarak projeleri başlatabilirler. Bu, başlangıç belgelerinin ve proje aşamalarının en başından itibaren otomatik olarak yapılandırılmasını sağlar. Sunucu, telemetri veya barındırılan veritabanları olmadan çalışarak tüm proje verilerini yerel makinede tutar.
Neler yapabilirsiniz
- 1Karar geçmişini koruyunBir yapay zeka asistanı, proje sırasında alınan her kararı kanıtları ve beklenen sonuçlarıyla birlikte kaydedebilir.
- 2Proje kısıtlamalarını uygulayınKullanıcılar, asistanın belirli hatalar yapmasını önlemek için kabul edilen derslere dayalı korumalar ayarlayabilirler.
- 3Geçmişi Obsidian'a aktarınGeliştiriciler, proje veritabanlarını bir Obsidian kasasında kullanılmak üzere Markdown notları koleksiyonuna dönüştürebilirler.
Projenin README dosyasından alınmıştır. Her kullanım durumu, oradaki bir alıntı ile kontrol edilir.
Project Memory MCP nasıl yüklenir
Biçimler 10 Kas 2026 tarihinde doğrulandıCursor'a ekleGoose'a ekleProject Memory MCP'yi Claude Code içine yükleyin
$ claude mcp add project-memory -- uvx project-memory-mcpProject Memory MCP'yi Cursor içine yükleyin
~/.cursor/mcp.json
{
"mcpServers": {
"project-memory": {
"command": "uvx",
"args": [
"project-memory-mcp"
]
}
}
}Project Memory MCP'yi VS Code içine yükleyin
.vscode/mcp.json
{
"servers": {
"project-memory": {
"type": "stdio",
"command": "uvx",
"args": [
"project-memory-mcp"
]
}
}
}Project Memory MCP'yi VS Code CLI içine yükleyin
$ code --add-mcp '{"name":"project-memory","type":"stdio","command":"uvx","args":["project-memory-mcp"]}'Project Memory MCP'yi Claude Desktop içine yükleyin
claude_desktop_config.json
{
"mcpServers": {
"project-memory": {
"command": "uvx",
"args": [
"project-memory-mcp"
]
}
}
}Project Memory MCP'yi Codex içine yükleyin
$ codex mcp add project-memory -- uvx project-memory-mcpProject Memory MCP'yi Codex config.toml içine yükleyin
~/.codex/config.toml
[mcp_servers.project-memory] command = "uvx" args = ["project-memory-mcp"]
Project Memory MCP'yi Gemini CLI içine yükleyin
$ gemini mcp add -s user project-memory uvx -- project-memory-mcpProject Memory MCP'yi Gemini settings.json içine yükleyin
~/.gemini/settings.json
{
"mcpServers": {
"project-memory": {
"command": "uvx",
"args": [
"project-memory-mcp"
]
}
}
}Otomatik kontroller
Çalıştırıldı 15 Kas 2026Tam rapor →Otomatik kontrollerimizden geçti. Bu bir güvenlik denetimi değildir: kodu okuyun ve sunucuya ihtiyaç duyduğu en dar erişimi verin. Kontroller nasıl çalışır
- Kaynak deposu bağlantılı ve erişilebilirdankaro-projects/project-memory is public and reachablegithub.com/dankaro-projects/project-memory ↗Geçti
- Paket, bu depoyu kaynağı olarak gösteriyorproject-memory-mcp names dankaro-projects/project-memory as sourcepypi.org/project/project-memory-mcp/ ↗Geçti
- Derleme kökeni (Sigstore onayı)Sigstore attestation for project-memory-mcppypi.org/project/project-memory-mcp/ ↗Geçti
- Açık kaynak lisansı (OSI)MITspdx.org/licenses/MIT.html ↗Geçti
- Son bir yıl içinde commit veya sürüm mevcutLast commit or release 2026-10-08github.com/dankaro-projects/project-memory ↗Geçti
- OpenSSF ScorecardKontrol edilmedi
- Paket adı popüler bir pakete yakın değilNo popular package one edit away from project-memory-mcpGeçti
- Pakette veya bağımlılıklarında kritik uyarı yok1 resolved dependencies checked; no critical advisoryosv.dev ↗Geçti
- Modele yönelik gizli talimat yok0 tool descriptions and the README read; no override phrases, credential paths or hidden charactersGeçti
- Yıkıcı araçlar etiketlenmişKontrol edilmedi
- Uzak uç nokta MCP el sıkışmasına yanıt veriyorKontrol edilmedi
Project Memory
Project Memory keeps the plan, the evidence, the decisions, the outcomes and the accepted lessons of one project in a local SQLite database. Your assistant reads and writes those records through three MCP tools. You follow the same records in a local control panel, which is read only, and you decide in the chat what is approved, accepted and merged.
It works for a software product, a consulting engagement and a workflow automation built in n8n. Work items can be code, documents, deliverables or exported workflows.
Public beta. Python 3.11 or newer is required. The runtime uses only the Python standard library. There is no telemetry, no hosted database and no account. Agent checks and delegated work run through the Codex or Claude Code CLI that you already have installed, and they consume that account's usage.
Install
Install uv, then run this inside the project you want to remember:
uvx project-memory-mcp@0.6.0b16 setup --client codex --trust
For Claude Code, replace --client codex with --client claude. Setup preserves existing records and settings, connects the MCP server and the lifecycle hooks, and opens the control panel. --trust approves the project integration in that client; omit it to approve the connection yourself. Start a new assistant session afterwards. Add --no-view for a headless installation.
For a permanent command:
uv tool install project-memory-mcp==0.6.0b16
project-memory doctor
project-memory view
To install the published wheel directly from GitHub instead of PyPI:
uvx --from https://github.com/Dankaro-projects/project-memory/releases/download/v0.6.0b16/project_memory_mcp-0.6.0b16-py3-none-any.whl project-memory setup --client claude --trust
Other local MCP clients use setup --client mcp and the stdio server. Setup and lifecycle covers client configuration, the plugins, upgrades, backups and removal.
Start a project
A new project starts from one of three templates:
project-memory init ~/projects/pricing-tool --template product --client codex
| Template | For | Starter documents | Phases |
|---|---|---|---|
product |
A software product | docs/brief.md, docs/research.md, docs/architecture.md, docs/stories.md |
Goals and brief, Research, Requirements approval, Architecture, User stories and acceptance, Build, Review and release |
engagement |
A consulting engagement | engagement/brief.md, engagement/stakeholders.md, engagement/research.md, engagement/findings.md, deliverables/README.md |
Scope and brief, Stakeholders and hypotheses, Research and evidence, Analysis and synthesis, Recommendations and deliverables, Client review, Handover |
automation |
A workflow automation, with n8n exports in workflows/ |
automation/process.md, automation/systems.md, automation/solution-design.md, workflows/README.md |
Process discovery, Systems and credentials inventory, Solution design, Workflow stories and test data, Build workflows, Test with sample data, Deployment and handover |
init creates the folder, initialises git unless you pass --no-git, writes any starter document that does not exist yet, connects the clients you name and records each phase as a work item. Running it again creates nothing a second time and never overwrites a document you have edited.
The kickoff conversation
Each template carries seven kickoff questions. Your assistant reads them with memory_get kickoff and asks you, for example what problem the product solves, who the stakeholders are, or which systems the process uses. It records your answers with memory_write answer_kickoff, fills the starter documents from those answers and proposes requirements. Only you approve the requirements baseline. Until that approval exists, the control panel opens on a kickoff checklist that shows the open questions, the research still needed, the starter documents that are still empty and the phases.
The everyday loop
Tell the assistant the result you want, the constraints and what would count as complete. It then records a work item with its objective, its completion criterion, the next action and the files it may change, continues from that record in later sessions, and records each decision with its evidence, alternatives, uncertainty and expected consequence. After acting, it records what actually happened. A failure stays visible after a later success.
You approve requirements, accept or reject proposed lessons, widen the allowed paths, and decide what is merged. Capturing a document does not approve its contents, and a plan does not authorise work.
The control panel
Run project-memory view in the project, or ask the assistant to open Project Memory. The panel reads the same database and refreshes while it is open. It is laid out as a Notion workspace: a sidebar of views, database tables with views, filters, sorting and grouping, and each item opening as a page beside the list, in a light or a dark theme.
| View | Content |
|---|---|
| Now | One sentence on the project position, the kickoff checklist, and the work in progress, paused, ready and done with the next step of each, and recent decisions |
| Plan | The hierarchy of phases, epics, stories, research items, deliverables and workflows as an outline with nested sub-items and progress, and a gallery of the phases |
| Work | A table and a board of work items, and a page for each with the plan, the allowed paths, dependencies, agent runs, lineage and history |
| Architecture | Components from source code, exported n8n workflows and authored items such as systems, stakeholders and deliverables |
| Dependencies | The work dependency graph with blocked chains, and the declared package table |
| Decisions | Decisions with their outcomes, and the lineage from requirement to outcome |
| Learning | Accepted guards and their recurrences, lessons awaiting your acceptance, failures without a lesson and scope widenings |
| Agents | Host availability, agent checks, delegated runs, and the merge or discard decision |
| Records | Search across every record kind, captured documents and host receipts |
| Requirements | The current requirements, their version and their approval evidence |
project-memory view --output review.html --include-bodies --no-open writes an offline snapshot instead. See the control panel guide.
Read the records in Obsidian
project-memory export --obsidian <vault> writes the records as a folder of Markdown notes with frontmatter and wikilinks, which Obsidian opens as a vault. A work item is a folder holding its own decisions, outcomes and plans, and sources, lessons and requirement revisions sit in shared folders beside it. The graph, the backlinks and the search of Obsidian then work on the project history, while the panel stays the place where you decide.
The export runs in one direction. The database is the source of truth, the export owns one folder inside the vault and touches nothing outside it, and a note edited inside that folder is lost on the next run. After a session that wrote records, the session stop hook refreshes the vault in a separate process.
Agent checks and delegated work
When Codex or Claude Code is configured, Project Memory can start short, separate host processes. An agent check reads the records and the project and reports on an outcome, on the current intent or on an unconfirmed execution. Delegated work runs a work item in its own git worktree, limited to the paths in its plan, and a second host reviews the resulting diff before you merge it. If one host reports a usage limit or a rate limit, the run reroutes once to the other configured host.
These runs use your installed Codex or Claude Code account and consume that account's usage. A reviewer cannot edit plans, accept lessons or merge anything. See agent checks and delegated work.
Guards and scope
An accepted lesson with a trigger becomes a guard. When a guard matches the paths or the wording of a work item, a decision must list that lesson in lessons_considered with an explicit yes or no and a reason, otherwise the decision is rejected. When a work item has allowed paths, the lifecycle hooks block an edit outside them, record the block and ask you to extend the scope in the chat. The record fields document defines the pattern rules.
Honest boundaries
- A recorded plan is not permission. Autonomy and scope are advisory records; your host's own permissions and your current instructions decide what may run.
- The scope guard reads the file paths of edit tools, patch markers and the targets of MCP write tools. It does not parse shell redirection or other indirect writes inside shell commands.
- Hooks record events mechanically. Only the assistant can record what those events meant, and a connected panel does not prove that the recording is complete.
- An agent verdict is an interpretation. A passing check does not prove that the work is correct, and an empty findings list is not proof either.
- Architecture is read statically from imports, manifests and exported workflow files. Dynamic loading is not detected.
- Bounded retrieval limits the characters a call returns. It cannot control the complete model input of the host.
- Daily productivity, token usage, correction rates and human task time are not measured, and this project makes no claim about them. Testing and limitations states what is verified and what is not.
Documentation
- User guide, from the first conversation to delivery
- Control panel and agent checks and delegated work
- Setup and lifecycle and record fields
- Testing and limitations, contributing, security and releasing
Packages are published on PyPI and in GitHub Releases.
Project Memory MCP soruları
Project Memory MCP'yi Claude Code'a nasıl eklerim?
Terminalinizde claude mcp add project-memory -- uvx project-memory-mcp komutunu çalıştırın. Her projede kullanılabilir olması için --scope user ekleyin.
Project Memory MCP'yi Cursor'a nasıl eklerim?
~/.cursor/mcp.json dosyasını açın ve yukarıdaki yükleme bölümünde gösterilen Cursor yapılandırmasını kullanarak sunucuyu mcpServers altına ekleyin.
Project Memory'yi ne tür projeler için kullanabilirim?
Yazılım ürünleri, danışmanlık süreçleri ve n8n üzerinde oluşturulan iş akışı otomasyonları için uygundur.
Project Memory verilerimi bulutta mı saklar?
Hayır, tüm proje kayıtlarını herhangi bir telemetri veya barındırılan veritabanı olmadan yerel bir SQLite veritabanında tutar.
Proje kayıtlarımı Obsidian'da görüntüleyebilir miyim?
Evet, kayıtları Obsidian'da kullanılmak üzere frontmatter ve wikilink içeren bir Markdown notları klasörü olarak dışa aktarabilirsiniz.
Projemi görsel bir özet halinde nasıl görebilirim?
Plan, İş ve Kararlar gibi çeşitli görünümler sunan, Notion benzeri bir çalışma alanı sağlayan yerel bir kontrol paneli çalıştırabilirsiniz.