CallNode MCP sunucusu
Commit 22 Eki 2026Yapay zeka asistanlarının CallNode telefon numaralarını kullanarak arama ve mesaj geçmişini okumasına, SMS/MMS göndermesine ve aramalar yapmasına olanak tanır.
Ayrıca bilinen adı cnchg/CallNode
- Yıldızlar
- 0
- Araçlar
- 13
- İndirmeler, 30 gün
- —
- En son sürüm
- 1.0.0
- Son commit
- 22 Eki 2026
- Lisans
- MIT
CallNode MCP nedir?
CallNode bir MCP sunucusudur. Yapay zeka asistanlarının CallNode telefon numaralarını kullanarak arama ve mesaj geçmişini okumasına, SMS/MMS göndermesine ve aramalar yapmasına olanak tanır. 13 araç sunar; örneğin list_numbers, get_number, list_calls.
Özet, projenin README dosyasından oluşturuldu
CallNode MCP sunucusu hakkında
CallNode, CallNode telefon numaralarınızı doğrudan yapay zeka asistanlarına bağlayan barındırılan bir MCP server sağlar. Bu kurulum, kullanıcıların yerel bir yazılım kurmadan Claude Desktop, ChatGPT, Cursor ve VS Code gibi platformlara iletişim yeteneklerini entegre etmelerine olanak tanır. Bir sunucu URL'si sağlayarak ve OAuth tabanlı bir onay süreci kullanarak, asistanınıza panelinizde seçtiğiniz belirli telefon numaralarıyla etkileşime geçme izni verebilirsiniz.
Bağlantı kurulduktan sonra asistan; send_message, place_call ve list_messages gibi araçları kullanarak çeşitli iletişim görevlerini yerine getirebilir. Yapay zekanın geçmişi okuyup okuyamayacağını, SMS/MMS gönderip gönderemeyeceğini veya telefon rehberinizi yönetip yönetemeyeceğini granular bir şekilde belirleyerek izinleri yönetebilirsiniz. Sistem, mesajların ve aramaların uygun yerel saatlerde gerçekleşmesini sağlamak için saatlik gönderim sınırı ve günün belirli saatlerine yönelik kısıtlamalar gibi güvenlik özellikleri içerir. Bu, konuşma tabanlı bir arayüz üzerinden telefon görevlerini otomatikleştirmek isteyen geliştiriciler için pratik bir çözüm sunar.
Neler yapabilirsiniz
- 1İletişim geçmişini incelemeYapay zeka asistanınızdan son etkileşimleri özetlemesini veya önceki mesajların durumunu kontrol etmesini isteyin.
- 2Dışa dönük mesajlaşmayı otomatize etmeAsistana belirli bir kişiye veya telefon numarasına metin mesajı veya resim göndermesi talimatını verin.
- 3Sesli aramaları gerçekleştirmeYapay zekanın, talimatlarınıza göre görüşmeyi yönetecek bir sesli asistan kullanarak telefon araması yapmasını sağlayın.
- 4Kişi listelerini yönetmeTelefon rehberinizdeki isimleri sorgulamak veya dizininize yeni kişiler eklemek için asistanı kullanın.
Projenin README dosyasından alınmıştır. Her kullanım durumu, oradaki bir alıntı ile kontrol edilir.
CallNode MCP nasıl yüklenir
Biçimler 10 Kas 2026 tarihinde doğrulandıCursor'a ekleGoose'a ekleCallNode MCP'yi Claude Code içine yükleyin
$ claude mcp add --transport http callnode https://mcp.callnode.io/mcpCallNode MCP'yi Cursor içine yükleyin
~/.cursor/mcp.json
{
"mcpServers": {
"callnode": {
"url": "https://mcp.callnode.io/mcp"
}
}
}CallNode MCP'yi VS Code içine yükleyin
.vscode/mcp.json
{
"servers": {
"callnode": {
"type": "http",
"url": "https://mcp.callnode.io/mcp"
}
}
}CallNode MCP'yi VS Code CLI içine yükleyin
$ code --add-mcp '{"name":"callnode","type":"http","url":"https://mcp.callnode.io/mcp"}'CallNode MCP'yi Codex içine yükleyin
$ codex mcp add callnode --url https://mcp.callnode.io/mcpCallNode MCP'yi Codex config.toml içine yükleyin
~/.codex/config.toml
[mcp_servers.callnode] url = "https://mcp.callnode.io/mcp"
CallNode MCP'yi Gemini CLI içine yükleyin
$ gemini mcp add -s user --transport http callnode https://mcp.callnode.io/mcpCallNode MCP'yi Gemini settings.json içine yükleyin
~/.gemini/settings.json
{
"mcpServers": {
"callnode": {
"url": "https://mcp.callnode.io/mcp",
"type": "http"
}
}
}CallNode MCP araçları 13
README dosyasından algılandılist_numbersget_numberlist_callsget_callplace_calllist_messagesget_messagesend_messagelist_phone_bookadd_phone_book_contactremove_phone_book_contactget_balance
| list_numbers | — | |
| get_number | — | |
| list_calls | — | |
| get_call | — | |
| place_call | — | |
| list_messages | — | |
| get_message | — | |
| send_message | — | |
| list_phone_book | — | |
| add_phone_book_contact | — | |
| remove_phone_book_contact | — | |
| get_balance | — |
13 aracın tümünü gösterDaha az araç göster
get_updates
| get_updates | — |
Otomatik kontroller
Çalıştırıldı 14 Kas 2026Tam rapor →Henüz doğrulanmadı. Bir sunucunun 80 puana, ciddi bir bulgu olmamasına ve kontrol edebilmemiz için yeterli veriye ihtiyacı vardır. Kontroller nasıl çalışır · Daha fazla puan için nelerin düzeltileceği
- Kaynak deposu bağlantılı ve erişilebilircnchg/callnode is public and reachablegithub.com/cnchg/callnode ↗Geçti
- Paket, bu depoyu kaynağı olarak gösteriyorKontrol edilmedi
- Derleme kökeni (Sigstore onayı)Kontrol edilmedi
- Açık kaynak lisansı (OSI)MITspdx.org/licenses/MIT.html ↗Geçti
- Son bir yıl içinde commit veya sürüm mevcutLast commit or release 2026-10-22github.com/cnchg/callnode ↗Geçti
- OpenSSF ScorecardKontrol edilmedi
- Paket adı popüler bir pakete yakın değilKontrol edilmedi
- Pakette veya bağımlılıklarında kritik uyarı yokKontrol edilmedi
- Modele yönelik gizli talimat yok13 tool descriptions and the README read; no override phrases, credential paths or hidden charactersGeçti
- Yıkıcı araçlar etiketlenmişKontrol edilmedi
- Uzak uç nokta MCP el sıkışmasına yanıt veriyorHTTPS endpoint answered 401 (sign-in required)Geçti
CallNode MCP server
Your CallNode phone numbers, inside your AI assistant.
CallNode hosts a Model Context Protocol (MCP) server at:
https://mcp.callnode.io/mcp
Sign in to it from claude.ai, Claude Desktop, ChatGPT, Claude Code, Cursor or VS Code, then tick the numbers the assistant may use. It can then:
- read your call and message history;
- send texts and picture messages;
- call or text your Phone Book contacts by name;
- once you switch calling on, place calls that the CallNode voice agent runs.
The server is hosted by CallNode, so there is nothing to install or run. This repository holds only the connection details: client configs, the registry entry and this README.
- What it can do, in plain words: https://callnode.io/integrations/mcp
- Every tool, permission, limit and error code: https://callnode.io/docs/mcp
Before you connect
- Create an account at https://callnode.io/signup (no credit card to start) and get a number. Self-serve numbers are local and toll-free numbers in the US and Canada.
- Open Dashboard → MCP Server, switch MCP access on, and tick the numbers an assistant may use. Every connection shares this one list; a number you did not tick cannot be read from or sent from.
Connect
You give the client only the server URL. It sends you to the CallNode consent page, and you approve. No token is created, and nothing secret is pasted into a file or a shell.
On the consent page you can untick permissions (sending, for example), choose a live or test connection, and set an hourly send cap. Afterwards the connection appears under Dashboard → MCP Server, and you can revoke it there at any time.
claude.ai and Claude Desktop
- Open Settings → Connectors and choose Add custom connector.
- Enter
https://mcp.callnode.io/mcpas the server URL and continue. Leave the client id and secret fields empty. - Claude opens the CallNode sign-in page. Log in if asked, review the numbers and permissions, and approve.
- Back in Claude, enable the connector in a chat.
ChatGPT
- Enable Developer mode under Settings → Connectors → Advanced, then choose Create.
- Enter
https://mcp.callnode.io/mcpas the MCP server URL and pick OAuth for authentication. No client id or secret is needed, because ChatGPT registers itself. - Approve on the CallNode sign-in page, then add the connector to a chat.
Claude Code
Either use .mcp.json from this repository in your project, or run this once:
claude mcp add --transport http callnode https://mcp.callnode.io/mcp
Inside Claude Code, type /mcp, pick callnode and choose Authenticate. Approve in the browser.
VS Code (Copilot agent mode)
- Save
.vscode/mcp.jsonin your workspace, then start the callnode server. VS Code opens the CallNode consent page; approve. - In Copilot Chat, choose Agent mode and tick the callnode tools.
Cursor
- Save
.cursor/mcp.jsonin your project, or the same entry in~/.cursor/mcp.json, then reload Cursor. - In Settings → MCP the server shows Needs login. Click it and approve in the browser.
Without a browser sign-in
For automations where a browser sign-in isn't possible, create a token connection in the dashboard. The snippets for each client are at https://callnode.io/docs/mcp#clients.
Tools
Each tool is bound to a permission you grant. A connection without that permission does not see the tool at all.
| Tool | Permission | What it does |
|---|---|---|
list_numbers |
numbers:read |
The enabled numbers, with what each can do and whether it has its own voice agent. |
get_number |
numbers:read |
One enabled number. Never webhook addresses, routing or credentials. |
list_calls |
calls:read |
Call records on the enabled numbers, newest first. No transcripts. |
get_call |
calls:read |
One call record, including how it ended. For calls placed through MCP: the summary, outcome and transcript. |
place_call |
calls:place |
Place a call. The CallNode voice agent runs it from your instructions, or the number's own voice webhook does. Off by default. |
list_messages |
messages:read |
SMS/MMS history on the enabled numbers. |
get_message |
messages:read |
One message, with its delivery status. |
send_message |
messages:send |
Send a text or picture message, to a number or to a Phone Book contact by name. |
list_phone_book |
phonebook:read |
Your Phone Book: your own lines, with their labels. |
add_phone_book_contact |
phonebook:manage |
Prepares an entry and returns a link. Only you can certify and save it. |
remove_phone_book_contact |
phonebook:manage |
Removes a Phone Book entry. |
get_balance |
account:read |
Your prepaid balance and auto-recharge settings. |
get_updates |
messages:read |
New inbound texts (and calls, when the connection can read calls) since the last check, with an optional wait of up to 20 seconds. |
send_message and place_call are marked as actions that reach a person and cannot be undone (destructiveHint), so clients that honour tool hints ask you before running them.
Safety and limits
- Numbers. Only the numbers you tick are visible, and no token can widen that list.
- Same rules as the API. Sends and calls go through the same rules as the CallNode API:
- opt-outs and STOP replies are honoured;
- texts and calls fall inside 8am–9pm in the recipient's local time, except your own certified Phone Book lines;
- sending numbers must be registered for messaging;
- calls need business verification, and do-not-call lists, destination restrictions and your concurrent-call limit apply;
- your balance must cover each send.
- Per-connection limits:
- 30 sends an hour by default, settable from 1 to 200;
- an identical text to the same recipient within 60 seconds is sent once;
- 10 calls an hour, and the same from/to pair within 60 seconds is never dialled twice;
- 120 tool calls a minute.
- The voice agent introduces itself as an AI assistant calling on behalf of your business and never claims to be human. It cannot transfer a call or take card details.
- Untrusted content. Message bodies and caller-supplied text reach the assistant marked as untrusted, so a text that tries to give it instructions reads as data.
- Activity log. Every tool call, allowed or refused, appears under Recent activity in your dashboard. Message contents are never stored there.
- Revoking. A revoked connection is refused on its next request. A sign-in lapses after 90 days without a fresh one.
- Test connections run every rule, then simulate the send or the call. Nothing leaves the platform and nothing is charged.
Pricing
The MCP server has no fee. Texts and calls are billed from your prepaid balance at your normal rates, and calls the CallNode voice agent runs add a per-minute rate for the voice. All rates are on https://callnode.io/pricing.
Support
- Help: support@callnode.io
- Security reports: security@callnode.io
- Privacy: https://callnode.io/privacy
- Terms: https://callnode.io/terms
- Security: https://callnode.io/security
Files in this repository
| File | For |
|---|---|
server.json |
The Official MCP Registry entry (io.callnode/mcp) |
.mcp.json |
Claude Code |
.vscode/mcp.json |
VS Code |
.cursor/mcp.json |
Cursor |
These files are released under the MIT License. The CallNode service itself is covered by the CallNode Terms.
CallNode MCP soruları
CallNode MCP'yi Claude Code'a nasıl eklerim?
Terminalinizde claude mcp add --transport http callnode https://mcp.callnode.io/mcp komutunu çalıştırın. Her projede kullanılabilir olması için --scope user ekleyin.
CallNode MCP'yi Cursor'a nasıl eklerim?
~/.cursor/mcp.json dosyasını açın ve yukarıdaki yükleme bölümünde gösterilen Cursor yapılandırmasını kullanarak sunucuyu mcpServers altına ekleyin.
CallNode MCP hangi araçları sunar?
13 araç sunar; bunlar arasında list_numbers, get_number, list_calls, get_call, place_call yer alır.
CallNode'u yapay zeka asistanıma nasıl bağlarım?
İstemcinize sunucu URL'sini sağlarsınız; bu URL sizi izinleri onaylamanız ve belirli telefon numaralarını seçmeniz için bir CallNode onay sayfasına yönlendirir.
MCP server kullanımı için herhangi bir ücret var mı?
MCP server'ın kendisi için ek bir ücret yoktur, ancak metin mesajları ve aramalar ön ödemeli CallNode bakiyenizden normal tarifeler üzerinden ücretlendirilir.
Yapay zeka asistanı telefon araması yapabilir mi?
Evet, arama özelliği açıldıktan sonra asistan, CallNode sesli asistanı tarafından yönetilen aramalar gerçekleştirebilir.