substack-ops MCP sunucusu
✓ DoğrulandıBir AI istemcisinin yanıt taslakları oluşturarak, yorumları yöneterek ve notlar ile restack işlemlerini otomatize ederek Substack yayınlarını yönetmesini sağlar.
Ayrıca bilinen adı 06ketan/substack-ops
- Yıldızlar
- 1
- Araçlar
- —
- İndirmeler, 30 gün
- 104
- En son sürüm
- 0.3.5
- Son commit
- 24 May 2026
- Lisans
- MIT
substack-ops MCP nedir?
substack-ops bir MCP sunucusudur. Bir AI istemcisinin yanıt taslakları oluşturarak, yorumları yöneterek ve notlar ile restack işlemlerini otomatize ederek Substack yayınlarını yönetmesini sağlar.
Özet, projenin README dosyasından oluşturuldu
substack-ops MCP sunucusu hakkında
substack-ops ile Substack yayınlarını bir AI arayüzü üzerinden yönetmek mümkündür. Bu araç, yazarların ve içerik üreticilerinin topluluk etkileşimlerini Cursor, Claude Desktop veya OpenCode gibi tercih ettikleri geliştirme ortamlarından doğrudan yönetmelerine olanak tanır. Sunucu, tarayıcı çerezleri veya magic linkler aracılığıyla mevcut Substack hesabınıza bağlanarak, yerel LLM'nizin ek AI API anahtarlarına ihtiyaç duymadan karmaşık sosyal görevleri yerine getirmesini sağlar.
Sunucu; gönderiler, notlar ve yorumlarla etkileşime girmek için 26 özelleşmiş araç sunar. İçerik aramak, ödeme duvarı arkasındaki gönderi verilerini Markdown formatında almak veya tepkiler ve restack'ler aracılığıyla etkileşimi yönetmek için kullanabilirsiniz. Yanıtlar yayına girmeden önce incelemenize, düzenlemenize veya toplu olarak onaylamanıza olanak tanıyan, kural tabanlı şablonları veya LLM güdümlü taslak oluşturmayı destekleyen gelişmiş bir yanıt motoruna sahiptir.
Güvenlik, tüm yazma işlemleri için varsayılan bir dry-run (deneme çalıştırması) modu ve eylemleri takip etmek için özel bir denetim günlüğü ile iş akışına entegre edilmiştir. Tam otomatik yönetim arayanlar için otomasyon sistemi, yeni aboneleri geri takip etmek veya özel YAML kurallarına göre belirli hesapları restack etmek gibi görevleri yerine getirmek için arka plan daemon'ları çalıştırabilir.
Neler yapabilirsiniz
- 1Topluluk yanıtları taslaklamaAI istemcinizden yanıtsız yorumları incelemesini ve onayınız için düşünceli yanıtlar önermesini isteyin.
- 2Sosyal etkileşimi otomatize etmeBelirli bir izleme listesindeki notları otomatik olarak restack etmek veya yeni takipçilere tepki vermek için arka plan görevleri ayarlayın.
Projenin README dosyasından alınmıştır. Her kullanım durumu, oradaki bir alıntı ile kontrol edilir.
substack-ops MCP nasıl yüklenir
Biçimler 10 Kas 2026 tarihinde doğrulandıCursor'a ekleGoose'a eklesubstack-ops MCP'yi Claude Code içine yükleyin
$ claude mcp add --env 'SUBSTACK_SESSION_TOKEN=<YOUR_SUBSTACK_SESSION_TOKEN>' substack-ops -- uvx substack-opssubstack-ops MCP'yi Cursor içine yükleyin
~/.cursor/mcp.json
{
"mcpServers": {
"substack-ops": {
"command": "uvx",
"args": [
"substack-ops"
],
"env": {
"SUBSTACK_SESSION_TOKEN": "<YOUR_SUBSTACK_SESSION_TOKEN>"
}
}
}
}substack-ops MCP'yi VS Code içine yükleyin
.vscode/mcp.json
{
"servers": {
"substack-ops": {
"type": "stdio",
"command": "uvx",
"args": [
"substack-ops"
],
"env": {
"SUBSTACK_SESSION_TOKEN": "<YOUR_SUBSTACK_SESSION_TOKEN>"
}
}
}
}substack-ops MCP'yi VS Code CLI içine yükleyin
$ code --add-mcp '{"name":"substack-ops","type":"stdio","command":"uvx","args":["substack-ops"],"env":{"SUBSTACK_SESSION_TOKEN":"<YOUR_SUBSTACK_SESSION_TOKEN>"}}'substack-ops MCP'yi Claude Desktop içine yükleyin
claude_desktop_config.json
{
"mcpServers": {
"substack-ops": {
"command": "uvx",
"args": [
"substack-ops"
],
"env": {
"SUBSTACK_SESSION_TOKEN": "<YOUR_SUBSTACK_SESSION_TOKEN>"
}
}
}
}substack-ops MCP'yi Codex içine yükleyin
$ codex mcp add substack-ops --env 'SUBSTACK_SESSION_TOKEN=<YOUR_SUBSTACK_SESSION_TOKEN>' -- uvx substack-opssubstack-ops MCP'yi Codex config.toml içine yükleyin
~/.codex/config.toml
[mcp_servers.substack-ops] command = "uvx" args = ["substack-ops"] [mcp_servers.substack-ops.env] SUBSTACK_SESSION_TOKEN = "<YOUR_SUBSTACK_SESSION_TOKEN>"
substack-ops MCP'yi Gemini CLI içine yükleyin
$ gemini mcp add -s user -e 'SUBSTACK_SESSION_TOKEN=<YOUR_SUBSTACK_SESSION_TOKEN>' substack-ops uvx -- substack-opssubstack-ops MCP'yi Gemini settings.json içine yükleyin
~/.gemini/settings.json
{
"mcpServers": {
"substack-ops": {
"command": "uvx",
"args": [
"substack-ops"
],
"env": {
"SUBSTACK_SESSION_TOKEN": "<YOUR_SUBSTACK_SESSION_TOKEN>"
}
}
}
}Yapılandırma
SUBSTACK_SESSION_TOKENGizliYour Substack session cookie value (the s%3A... string). Required for authenticated calls. Easier path: run `substack-ops auth login --browser chrome` and the cookie is auto-grabbed.
SUBSTACK_OPS_LLM_CMDOptional: override the host CLI used by the unattended daemon path (default: auto-detect claude / cursor-agent / codex on PATH). Use {prompt} placeholder if your CLI takes the prompt as an arg.
SUBSTACK_OPS_MCP_PATHOverride path to the mcp.json file the auth layer reads. Defaults to ~/.cursor/mcp.json.
SUBSTACK_PUBLICATION_URLYour Substack publication URL (e.g. https://you.substack.com/). Optional if set in ~/.cursor/mcp.json's mcpServers.substack-api.env.
SUBSTACK_USER_IDYour Substack numeric user id. Optional if set in ~/.cursor/mcp.json.
| Ad | Açıklama | Sunucu |
|---|---|---|
| SUBSTACK_SESSION_TOKEN | Your Substack session cookie value (the s%3A... string). Required for authenticated calls. Easier path: run `substack-ops auth login --browser chrome` and the cookie is auto-grabbed. | Gizli |
| SUBSTACK_OPS_LLM_CMD | Optional: override the host CLI used by the unattended daemon path (default: auto-detect claude / cursor-agent / codex on PATH). Use {prompt} placeholder if your CLI takes the prompt as an arg. | |
| SUBSTACK_OPS_MCP_PATH | Override path to the mcp.json file the auth layer reads. Defaults to ~/.cursor/mcp.json. | |
| SUBSTACK_PUBLICATION_URL | Your Substack publication URL (e.g. https://you.substack.com/). Optional if set in ~/.cursor/mcp.json's mcpServers.substack-api.env. | |
| SUBSTACK_USER_ID | Your Substack numeric user id. Optional if set in ~/.cursor/mcp.json. |
Otomatik kontroller
Çalıştırıldı 15 Kas 2026Tam rapor →Otomatik kontrollerimizden geçti. Bu bir güvenlik denetimi değildir: kodu okuyun ve sunucuya ihtiyaç duyduğu en dar erişimi verin. Kontroller nasıl çalışır
- Kaynak deposu bağlantılı ve erişilebilir06ketan/substack-ops is public and reachablegithub.com/06ketan/substack-ops ↗Geçti
- Paket, bu depoyu kaynağı olarak gösteriyorKontrol edilmedi
- Derleme kökeni (Sigstore onayı)No build attestation published for this releaseKontrol edilmedi
- Açık kaynak lisansı (OSI)MITspdx.org/licenses/MIT.html ↗Geçti
- Son bir yıl içinde commit veya sürüm mevcutLast commit or release 2026-05-24github.com/06ketan/substack-ops ↗Geçti
- OpenSSF ScorecardKontrol edilmedi
- Paket adı popüler bir pakete yakın değilNo popular package one edit away from substack-opsGeçti
- Pakette veya bağımlılıklarında kritik uyarı yok25 resolved dependencies checked; no critical advisoryosv.dev ↗Geçti
- Modele yönelik gizli talimat yok0 tool descriptions and the README read; no override phrases, credential paths or hidden charactersGeçti
- Yıkıcı araçlar etiketlenmişKontrol edilmedi
- Uzak uç nokta MCP el sıkışmasına yanıt veriyorKontrol edilmedi
substack-ops
Standalone Substack CLI + 26-tool MCP server for Cursor MCP, Claude MCP, OpenCode MCP, and any stdio MCP host. Your IDE drafts the replies. Zero AI API keys.
Site → substack-ops.chavan.in · Source → 06ketan/substack-ops · Glama → mcp/servers/06ketan/substack-ops
Posts, notes, comments, replies, reactions, restacks, recommendations, search, profiles, feeds, automations, MCP server, Textual TUI. One Python install, one binary, MIT licensed.
TL;DR — MCP-native (no API key, one command)
uvx substack-ops mcp install cursor # or claude-desktop, claude-code, opencode, print
# Restart your host. Then in chat:
# "list unanswered comments on post 193866852"
# "draft a warm reply to comment 12345"
# "post that draft"
Your host's LLM (Cursor's, Claude's) does the drafting via the
propose_reply / confirm_reply tools. No ANTHROPIC_API_KEY /
OPENAI_API_KEY needed.
Wrong install?
This project is substack-ops on PyPI — install with uv / uvx, not unrelated npx packages that appear when searching “Substack MCP”. Canonical listing: Glama — 06ketan/substack-ops.
Works with (MCP)
These rows help discovery (search keywords); confirm each host’s current MCP docs before upgrading.
Open source–oriented hosts
| Host | Documentation | Typical wire-up |
|---|---|---|
| OpenCode | OpenCode MCP servers | uvx substack-ops mcp install opencode |
| Continue | Continue | uvx substack-ops mcp install print — paste the snippet into Continue’s MCP settings |
| Zed | Zed | Configure stdio MCP per Zed’s docs |
| Cline | Cline | MCP setup per extension / marketplace docs |
| Goose | Goose | MCP extensions per Goose docs |
Large commercial stacks
| Host | Documentation | Typical wire-up |
|---|---|---|
| Cursor | Cursor MCP | uvx substack-ops mcp install cursor |
| Claude (Desktop / Code) | Claude Desktop, Claude Code | mcp install claude-desktop / claude-code |
| GitHub Copilot | Copilot | MCP in VS Code / Copilot where supported — use print + host docs |
| ChatGPT | OpenAI | Developer / connector flows — often REST (Slideshot API) for tools without MCP |
| Google Gemini | Gemini | Gemini CLI / IDE features per Google docs — stdio where supported |
OpenCode (copy-paste)
Auto-install:
uvx substack-ops mcp install opencode
Manual (~/.config/opencode/opencode.json):
{
"mcp": {
"substack-ops": {
"type": "local",
"command": ["uvx", "substack-ops", "mcp", "serve"],
"enabled": true
}
}
}
Optional version pin: use ["uvx", "substack-ops==0.3.5", "mcp", "serve"] (replace with current PyPI release).
Setup (dev / from source)
git clone https://github.com/06ketan/substack-ops && cd substack-ops
uv sync
uv sync --extra mcp # mcp SDK for the MCP server (recommended)
uv sync --extra tui # textual for the TUI
uv sync --extra chrome # pycryptodome + keyring for Chrome cookie auto-grab
Auth defaults to ~/.cursor/mcp.json's mcpServers.substack-api.env. Override
with env or .env. Or use one of the auth flows in auth login / auth setup.
uv run substack-ops auth verify
uv run substack-ops quickstart # 20-step tour
Command surface
Grouped by intent. Every write defaults to --dry-run; flip with
--no-dry-run (and --yes-i-mean-it for the irreversible ones). All writes
land in .cache/audit.jsonl and are dedup-checked against .cache/actions.db.
Auth (4)
| Command | What it does |
|---|---|
auth verify |
Confirm the cookie works; print authed user/pub. |
auth test |
Same as verify, exit non-zero on failure (CI-friendly). |
auth login --browser chrome|brave |
Auto-grab cookie from local Chromium browser via macOS Keychain. |
auth login --email me@x.com |
Email magic-link → paste-the-link interactive flow. |
auth setup |
Interactive paste of connect.sid cookie. |
Read — Posts (8)
| Command | What it does |
|---|---|
posts list [--pub] [--limit] [--sort new|top] |
List posts from a publication (yours by default). |
posts show <id|slug> [--pub] |
Post metadata (title, dates, reactions, comment count). |
posts get --slug <slug> [--pub] |
Same as show but slug-only. |
posts content <id> [--md] [--pub] |
HTML body (auth-aware for paywalled). --md converts to Markdown. |
posts stats <id> |
Engagement counts — reactions, comments. |
posts search <query> [--pub] [--limit] |
Substack-side full-text search. |
posts paywalled <id> [--pub] |
Boolean: is this post paywalled? |
posts react <id> [--off] [--pub] |
Add (or remove with --off) a reaction. Defaults to ❤. |
posts restack <id> [--off] |
Restack a post (Substack does not support unrestack). |
Read — Notes (5)
| Command | What it does |
|---|---|
notes list [--limit] |
Your published Notes. |
notes show <id> |
One note + its reply tree. |
notes publish <body> [--no-dry-run] |
Publish a top-level Note. |
notes react <id> [--off] |
React on any Note. |
notes restack <id> [--off] |
Restack a Note. |
Read + Write — Comments (5)
| Command | What it does |
|---|---|
comments tree <post_id> [--pub] |
Full nested comment tree as table. |
comments export <post_id> --out file.json [--pub] |
Same tree as JSON. |
comments add <post_id> <body> [--pub] [--no-dry-run] |
New top-level comment. |
comments react <id> --kind post|note [--off] |
React on a comment. |
comments delete <id> --kind post|note [--no-dry-run] |
Destructive — your own comments only. |
Reply engine (6)
| Command | What it does |
|---|---|
reply template <post_id> --template thanks |
Rule-based replies (no LLM). |
reply review <post_id> |
LLM drafts each, you [a]ccept / [e]dit / [s]kip / [q]uit. |
reply bulk <post_id> --out drafts.json |
Draft every comment to a file. Edit, set action: "approved". |
reply note-bulk <note_id> --out drafts.json |
Same for replies under a Note. |
reply bulk-send drafts.json [--no-dry-run] |
Posts only approved rows. Dedup-checked. |
reply auto <post_id> --no-dry-run --yes-i-mean-it |
Draft + post immediately. 30s rate limit. |
Read — Discovery (8)
| Command | What it does |
|---|---|
feed list --tab for-you|subscribed|category-{slug} |
Reader feed (the Substack app feed). |
profile me / profile get <handle> |
Profile. |
users get <handle> / users subscriptions <handle> |
Public user info + their subs. |
podcasts list [--pub] |
Audio posts. |
recommendations list [--pub] |
Pub's recommended publications. |
authors list [--pub] |
Pub's contributor list. |
categories list / categories get --name <X> |
Substack's category taxonomy. |
Automations (3)
| Command | What it does |
|---|---|
auto presets |
List built-in YAML rules. |
auto run <name> |
One-shot run a preset. |
auto daemon <name> --interval 60 |
Loop forever; logs to audit. |
Operations + safety (3)
| Command | What it does |
|---|---|
audit search [--kind] [--target] [--status] [--since 7d] |
Query the JSONL audit log. |
audit dedup-status |
Counts in the dedup SQLite DB. |
quickstart |
20-step interactive tour. |
MCP server (3)
| Command | What it does |
|---|---|
mcp install <cursor|claude-desktop|claude-code|opencode|print> [--dry-run] |
Auto-merge config into your host. |
mcp serve |
stdio MCP server (26 tools). |
mcp list-tools |
Print the tool registry. |
Other (1)
| Command | What it does |
|---|---|
tui |
Textual TUI — 6 tabs (Notes, Posts, Comments, Feed, Auto, Profile). |
Multi-publication
Every read command accepts --pub <subdomain|domain>. Defaults to your own
publication.
substack-ops posts list --pub stratechery --limit 5
substack-ops posts search "ai" --pub stratechery
substack-ops recommendations list --pub stratechery
Reply modes
| Mode | What it does | Safety |
|---|---|---|
template |
YAML keyword/regex rules under src/substack_ops/templates/*.yaml |
dry-run default |
review |
LLM drafts each reply, you [a]ccept / [e]dit / [s]kip / [q]uit |
dry-run default + manual gate per comment |
bulk |
LLM drafts every comment to drafts.json. Edit file, set action: "approved" |
offline review, dedup-checked on send |
bulk-send |
Posts only items with action: "approved" |
dry-run default; dedup DB prevents the M2 31-dup-replies regression |
auto |
LLM drafts and posts immediately | requires --no-dry-run --yes-i-mean-it, 30s rate limit |
After every live note-reply the engine re-fetches the new comment and asserts
ancestor_path is non-empty. If empty, the audit row's result_status is
flipped to "orphaned" (the M2 bug where parent_comment_id was silently
dropped — now caught).
Automations
Built-in presets (auto presets):
- like-back — when someone reacts to your note, react to their latest note.
- auto-reply — same trigger, but post a templated thank-you.
- auto-restack — when a watchlist handle posts a new note, restack it.
- follow-back — when someone follows you, follow them back.
Custom YAML rules under ~/.config/substack-ops/auto/*.yaml. Loop with
auto daemon <name> --interval 60.
MCP server
substack-ops mcp install opencode # auto-add to ~/.config/opencode/opencode.json
substack-ops mcp install cursor # auto-add to ~/.cursor/mcp.json
substack-ops mcp install claude-desktop # auto-add to claude_desktop_config.json
substack-ops mcp install claude-code # uses `claude mcp add` under the hood
substack-ops mcp install print # print the snippet only
substack-ops mcp install cursor --dry-run # preview without writing
substack-ops mcp serve # stdio server
substack-ops mcp list-tools # 26 tools
Manual config snippet (if you prefer):
{
"mcpServers": {
"substack-ops": {
"command": "substack-ops",
"args": ["mcp", "serve"]
}
}
}
If the mcp SDK is not installed, the server falls back to a minimal
stdin/stdout JSON-line dispatcher that's still useful for scripting:
echo '{"tool":"list_posts","args":{"limit":3}}' | substack-ops mcp serve
MCP-native draft loop (no API key)
3 tools designed to let your host LLM draft for you:
| Tool | What it does |
|---|---|
get_unanswered_comments |
Returns the worklist: comments where you have not yet replied (any depth). |
propose_reply |
Dry-run only. Returns a token + payload preview. No write. |
confirm_reply |
Posts a previously-proposed reply by token. Idempotent via dedup DB. Token TTL 5 min. |
Differentiator tools (the safety + drafting stack that makes the unattended
mode safe): bulk_draft_replies, send_approved_drafts, audit_search,
dedup_status, get_unanswered_comments, propose_reply, confirm_reply.
LLM strategy
Two layers, both free:
- MCP-native (default). Host LLM drafts via
propose_reply/confirm_reply. No env vars, no API key. Use this for interactive replies. - Subprocess CLI (daemon path). For
reply auto/auto daemonwhen no human is in the loop. Auto-detectsclaude(Claude Code),cursor-agent, orcodexon PATH. Override withSUBSTACK_OPS_LLM_CMD.
There is no paid-API-key path. If you want one, vendor the old _anthropic /
_openai methods from substack-ops v0.2.0 yourself.
Textual TUI
substack-ops tui
6 tabs: Notes / Posts / Comments / Feed / Auto / Profile. Sub-tabs: 1=mine, 2=following, 3=general. Keys: tab, 1-3, ↑/↓, enter, r, l, s, o, q/esc.
Auth methods
substack-ops auth verify # uses mcp.json or env
substack-ops auth login # auto-grab cookies from Chrome (macOS Keychain)
substack-ops auth login --browser brave
substack-ops auth login --email me@x.com # email magic-link, paste-the-link mode
substack-ops auth setup # interactive paste cookies
Architecture
mcp.json | env | Chrome | OTP → auth.py / auth_chrome.py / auth_otp.py
│
.cache/cookies.json
│
SubstackClient (httpx)
│
┌──────┬──────┬───────┬───────┬───────┬──────┬──────┬─────┬──────┐
▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼
posts notes comments feed profile users recs cats ... reply_engine
│
┌───────────────┼────────────┐
▼ ▼ ▼
template ai_review ai_bulk + ai_auto
└───────────────┬────────────┘
▼
base.post_reply / post_note_reply
│
┌────────┼────────┐
▼ ▼ ▼
dedup audit ancestor_path
(SQLite) (jsonl) guardrail
auto/engine.py ────────────────┐
mcp/server.py ──── 23 tools ──┼─── all share SubstackClient
tui/app.py ──── 6 tabs ──┘
Endpoints used
| Action | Method + URL |
|---|---|
| Auth check | GET https://substack.com/api/v1/subscriptions |
| List posts | GET {pub}/api/v1/archive |
| Post by id | GET {pub}/api/v1/posts/by-id/{id} |
| Post by slug | GET {pub}/api/v1/posts/{slug} |
| Post content | same as above; body_html field |
| Post search | GET {pub}/api/v1/archive?search= |
| Comments | GET {pub}/api/v1/post/{id}/comments?all_comments=true |
| Reply to comment | POST {pub}/api/v1/post/{id}/comment body {body, parent_id} |
| Add top-level comment | same with parent_id: null |
| React to post | POST {pub}/api/v1/post/{id}/reaction body {reaction} |
| Restack post | POST https://substack.com/api/v1/restack body {post_id} |
| Restack note | POST https://substack.com/api/v1/restack body {comment_id} |
| Delete post-comment | DELETE {pub}/api/v1/comment/{id} (PUB host) |
| Delete note | DELETE https://substack.com/api/v1/comment/{id} (BARE host) |
| My notes | GET https://substack.com/api/v1/reader/feed/profile/{user_id} |
| Note thread | GET https://substack.com/api/v1/reader/comment/{note_id} |
| Note replies | GET https://substack.com/api/v1/reader/comment/{note_id}/replies |
| Publish note | POST https://substack.com/api/v1/comment/feed body {bodyJson} |
| Reply to note | same with {bodyJson, parent_id} (NOT parent_comment_id — known M2 bug) |
| React to comment | POST {host}/api/v1/comment/{id}/reaction (host = pub for post-comments, substack.com for notes) |
| Recommendations | GET {pub}/api/v1/recommendations/from/{publication_id} |
| Authors | GET {pub}/api/v1/publication/users/ranked?public=true |
| Categories | GET https://substack.com/api/v1/categories |
| User profile | GET https://substack.com/api/v1/user/{handle}/public_profile (auto-redirects on 404) |
| Reader feed | GET https://substack.com/api/v1/reader/feed/{recommended|subscribed|category/{slug}} |
Related MCPs
- slideshot — HTML → slides (PNG / PDF / PPTX); npm
slideshot-mcp. - medium-ops — Medium stories + responses + MCP (PyPI
medium-ops).
Tests
uv run pytest -q # 43 tests, ~0.6s, no live network
Coverage today: auth, client (read+write+engagement+delete), reply engine,
dedup DB, audit log search, MCP tool registry & dispatcher, automation engine
preset loader, the M2 parent_id regression test, the M2 host-mismatch
regression test.
GSD workflow
.planning/ scaffold for Get Shit Done
under ~/.claude/skills/gsd-*. Roadmap at .planning/ROADMAP.md,
per-phase plans at .planning/phases/M*/PHASE.md.
Known gaps
- Full email stats (opens/clicks/views) — needs dashboard CSRF flow. Fallback: Playwright MCP scrape.
- Reactions endpoint shape on POST/DELETE not yet probed live; current shape is a best-guess from upstream tool catalogs.
- Auto-engine
new_follower/new_note_fromtriggers are stubbed (returnnote: "trigger not yet implemented"). - TUI sub-tabs (1/2/3) and reply/like/restack key bindings are scaffolded but not wired to the client yet.
- Chrome cookie auto-grab tested only for macOS Chrome; Brave path included; Linux/Windows not supported.
License
MIT. See LICENSE.
The vendored httpx-port helpers under src/substack_ops/_substack/ are derived
from the MIT-licensed NHagar/substack_api package — kept here so this repo
ships zero runtime dependencies on third-party Substack libraries. Attribution
preserved in each file's module docstring.
substack-ops MCP soruları
substack-ops MCP'yi Claude Code'a nasıl eklerim?
Terminalinizde claude mcp add --env 'SUBSTACK_SESSION_TOKEN=<YOUR_SUBSTACK_SESSION_TOKEN>' substack-ops -- uvx substack-ops komutunu çalıştırın. Her projede kullanılabilir olması için --scope user ekleyin.
substack-ops MCP'yi Cursor'a nasıl eklerim?
~/.cursor/mcp.json dosyasını açın ve yukarıdaki yükleme bölümünde gösterilen Cursor yapılandırmasını kullanarak sunucuyu mcpServers altına ekleyin.
Bir API anahtarı gerektiriyor mu?
Hayır, mevcut Substack kimlik doğrulamanızı kullanır ve ek bir AI API anahtarı gerektirmez.