정책 검증을 거친 Solana wallet 작업, 시뮬레이션 및 트랜잭션 준비를 통해 AI 클라이언트가 Toreva 관리 객체와 상호작용할 수 있도록 합니다.
다른 이름 toreva/kit, @toreva/mcp
- 스타
- 0
- Tools
- 7
- 다운로드, 30일
- —
- 최신 버전
- 0.2.0
- 마지막 커밋
- 2026년 11월 16일
- 라이선스
- —
Toreva Kit MCP란?
정책 검증을 거친 Solana wallet 작업, 시뮬레이션 및 트랜잭션 준비를 통해 AI 클라이언트가 Toreva 관리 객체와 상호작용할 수 있도록 합니다. 7개 도구를 제공합니다. 예: toreva_establish_agent_wallet, toreva_read_or_scan, toreva_simulate_action.
프로젝트 README에서 생성된 요약
Toreva Kit MCP server 정보
Kit은 정책 검증을 거친 Solana wallet 작업을 통해 AI 클라이언트와 Toreva 관리 객체 간의 연결을 제공합니다. 개발자는 Claude Desktop, Cursor 또는 OpenClaw를 사용하여 로컬 환경에 이 server를 통합할 수 있습니다. 설정 시 로그인 명령어를 실행하여 토큰을 생성하거나 secret store에서 RELAY_AUTH_TOKEN을 제공해야 합니다. 이 server는 stdio를 통해 작동하며 사용자가 직접 컴퓨팅 자원을 사용하는 BYOC(Bring Your Own Compute) 방식을 지원하므로, 모델 실행은 Toreva의 호스팅 인프라가 아닌 개발자의 계정에서 수행됩니다.
server에는 agent 상호작용 관리 및 결과 검증을 위한 특정 도구가 포함되어 있습니다. 사용자는 상한선이 설정된 agent wallet을 생성할 수 있고, 작업이 확정되기 전에 시뮬레이션하거나 서명되지 않은 트랜잭션을 준비할 수 있습니다. gateway relay와의 모든 상호작용은 영수증(receipt)을 생성하며, 이를 조회하거나 설명하여 결과에 대한 증거를 확보할 수 있습니다. 이 시스템은 모든 객체 읽기 및 쓰기에 대해 보안과 검증 가능한 영수증이 필요한 agent fleet 또는 개별 통합 기능을 구축하는 개발자를 위해 설계되었습니다.
프로젝트의 README를 바탕으로 작성되었습니다. 모든 활용 사례는 해당 내용의 인용문과 대조하여 확인합니다.
Toreva Kit MCP 설치 방법
형식 확인: 2026년 11월 10일Cursor에 추가Goose에 추가Claude Code에 Toreva Kit MCP 설치
$ claude mcp add kit -- npx -y @toreva/mcpCursor에 Toreva Kit MCP 설치
~/.cursor/mcp.json
{
"mcpServers": {
"kit": {
"command": "npx",
"args": [
"-y",
"@toreva/mcp"
]
}
}
}VS Code에 Toreva Kit MCP 설치
.vscode/mcp.json
{
"servers": {
"kit": {
"type": "stdio",
"command": "npx",
"args": [
"-y",
"@toreva/mcp"
]
}
}
}VS Code CLI에 Toreva Kit MCP 설치
$ code --add-mcp '{"name":"kit","type":"stdio","command":"npx","args":["-y","@toreva/mcp"]}'Claude Desktop에 Toreva Kit MCP 설치
claude_desktop_config.json
{
"mcpServers": {
"kit": {
"command": "npx",
"args": [
"-y",
"@toreva/mcp"
]
}
}
}Codex에 Toreva Kit MCP 설치
$ codex mcp add kit -- npx -y @toreva/mcpCodex config.toml에 Toreva Kit MCP 설치
~/.codex/config.toml
[mcp_servers.kit] command = "npx" args = ["-y", "@toreva/mcp"]
Gemini CLI에 Toreva Kit MCP 설치
$ gemini mcp add -s user kit npx -- -y @toreva/mcpGemini settings.json에 Toreva Kit MCP 설치
~/.gemini/settings.json
{
"mcpServers": {
"kit": {
"command": "npx",
"args": [
"-y",
"@toreva/mcp"
]
}
}
}Toreva Kit MCP 도구 7
README에서 감지됨toreva_establish_agent_wallettoreva_read_or_scantoreva_simulate_actiontoreva_prepare_unsigned_transactiontoreva_explain_actiontoreva_get_receipttoreva_refuse_action
| toreva_establish_agent_wallet | — | |
| toreva_read_or_scan | — | |
| toreva_simulate_action | — | |
| toreva_prepare_unsigned_transaction | — | |
| toreva_explain_action | — | |
| toreva_get_receipt | — | |
| toreva_refuse_action | — |
구성
RELAY_AUTH_TOKEN
| 이름 | 설명 | 유형 |
|---|---|---|
| RELAY_AUTH_TOKEN | — |
자동 검사
2026년 11월 14일에 실행됨전체 보고서 →자동 검사를 통과했습니다. 이는 보안 감사가 아닙니다. 코드를 직접 읽고 서버에 필요한 최소한의 권한만 부여하십시오. 검사 방식 · 점수를 높이기 위해 수정할 항목
- 소스 저장소 연결 및 접근 가능toreva/kit is public and reachablegithub.com/toreva/kit ↗통과
- 패키지가 이 저장소를 소스로 명시@toreva/mcp names toreva/kit as sourcenpmjs.com/package/@toreva/mcp ↗통과
- 빌드 출처(Sigstore 증명)No build attestation published for this release검사되지 않음
- 오픈 소스 라이선스 (OSI)No license결함 발견
- 최근 1년 내 커밋 또는 릴리스Last commit or release 2026-11-13github.com/toreva/kit ↗통과
- OpenSSF Scorecard검사되지 않음
- 패키지 이름이 인기 패키지와 유사하지 않음No popular package one edit away from @toreva/mcp통과
- 패키지 및 해당 종속성에 중요한 보안 권고 없음100 resolved dependencies checked; no critical advisoryosv.dev ↗통과
- 모델에 대한 숨겨진 지침 없음7 tool descriptions and the README read; no override phrases, credential paths or hidden characters통과
- 파괴적인 도구에 라벨 표시됨No tool named like delete, drop or exec통과
- 원격 엔드포인트가 MCP 핸드셰이크에 응답검사되지 않음
README
GitHub에서 보기toreva kit
Connector primitives for Toreva governed objects. Bring your own compute, use the gateway relay, and require receipts for every outcome.
Kit provides SDK, CLI, and MCP connectors for developers connecting their own compute to Toreva governed objects. The setup paths below are developer integrations.
The Day-1 Mac helper scope is Pair and Unpair only, for every user. It must request no Screen Recording or Accessibility permissions and take no jobs. Developer connector setup is separate from helper pairing.
The front door is the object store. MCP clients, SDK callers, CLI users, and customer-owned agent fleets all read and write the same Toreva objects through the gateway relay, and every accepted, pending, or refused outcome returns a receipt.
GitHub can prove which organization and admin are acting. It is not the transport for Toreva work messages. Compute is bound per scope, and the live paths put model execution on the developer's own account.
No money moves through this connector.
The Three Doors
Door 1: MCP
For developer integrations, start here. Your AI client connects the Toreva MCP server, your own client subscription does the work, and Toreva receives only the object reads and writes you authorize.
npx toreva init --client=claude-desktop
npx toreva login
npx toreva doctor
Restart the client, then ask it about your Toreva objects or receipts. Supported
client config targets are claude-desktop, cursor, and openclaw.
Door 2: Customer-Owned Fleet
Use this when you need unattended or scheduled agents. A GitHub organization
admin runs agents in their own org, on their own runners, with their own model
credentials. The agents call Toreva through MCP, SDK, or CLI and land answers
back on Toreva objects with receipt_id proof.
Start here: GitHub Org Agent Fleet.
Door 3: Hosted Compute
Hosted compute means Toreva runs the agents and carries the marginal model cost. This door is deferred and is not documented as available. Use MCP or a customer-owned fleet today.
How Answers Land
The object store is the receiving system. A work surface prepares a relay
request, sends it to https://gateway.toreva.com/relay, and treats the result
as accepted only when the gateway returns a receipt_id.
For the shared install, invoke, and receipt shapes, see Work-Surface Connector Primitives.
MCP Tools
| Tool | What it does |
|---|---|
toreva_establish_agent_wallet |
Create the agent wallet with hard limits |
toreva_read_or_scan |
Read or scan a main wallet or agent wallet |
toreva_simulate_action |
Test an action before anything is prepared |
toreva_prepare_unsigned_transaction |
Prepare an unsigned transaction after simulation |
toreva_explain_action |
Explain an action or receipt |
toreva_get_receipt |
Fetch one receipt |
toreva_refuse_action |
Refuse an unsafe action and return a refusal receipt |
Install
The local package runs over stdio. Use either the token written by
toreva login or an explicit RELAY_AUTH_TOKEN from your own secret store.
npm install -g @toreva/mcp
toreva login
toreva-mcp
For runner-owned environments:
RELAY_AUTH_TOKEN=your_token toreva-mcp
For local development:
pnpm install
pnpm --filter @toreva/mcp build
RELAY_AUTH_TOKEN=your_token node packages/mcp/dist/index.js
Package
@toreva/mcp is the Rung-1 MCP package. Version 0.2.0 is stdio-local only.
The public metadata is server.json and packages/mcp/package.json.
Packages
| Package | What |
|---|---|
@toreva/mcp |
MCP server for agent integration |
@toreva/types |
Shared schemas and types |
@toreva/sdk |
TypeScript client library |
@toreva/cli |
Command-line interface |
Verify
pnpm test
pnpm --filter @toreva/mcp build
Regulatory notice
This software provides tooling for interacting with the Toreva policy service. It does not provide financial advice, investment advice, trading advice, or any other form of advice. Use of this software does not create a fiduciary relationship, advisory relationship, or any other professional relationship between you and Toreva Pty Ltd.
Toreva Pty Ltd is not responsible for modifications made to this software by third parties, including modifications that alter or remove compliance language, disclaimers, or risk warnings. If you use a modified version of this software, you do so at your own risk and are responsible for ensuring your use complies with applicable law.
License
MIT — see LICENSE
Toreva Kit MCP 질문
Toreva Kit MCP를 Claude Code에 추가하려면 어떻게 하나요?
터미널에서 claude mcp add kit -- npx -y @toreva/mcp를 실행합니다. 모든 프로젝트에서 사용할 수 있게 하려면 --scope user를 추가합니다.
Toreva Kit MCP를 Cursor에 추가하려면 어떻게 하나요?
~/.cursor/mcp.json를 열고 mcpServers 아래에 서버를 추가합니다. 위 설치 섹션에 표시된 Cursor 구성을 사용합니다.
Toreva Kit MCP는 어떤 도구를 제공하나요?
7개 도구를 제공합니다. 예: toreva_establish_agent_wallet, toreva_read_or_scan, toreva_simulate_action, toreva_prepare_unsigned_transaction, toreva_explain_action.
이 커넥터로 송금이 가능한가요?
아니요, 이 커넥터를 통해 자금이 이동하지 않습니다.
어떤 AI 클라이언트를 지원하나요?
Claude Desktop, Cursor, OpenClaw를 지원합니다.
MCP server 인증은 어떻게 하나요?
'toreva login' 명령어로 생성된 토큰을 사용하거나, secret store에서 RELAY_AUTH_TOKEN을 직접 제공하면 됩니다.