FIPS 140 certificate tracker MCP server
2026년 9월 3일 커밋AI 클라이언트가 NIST FIPS 140 암호 모듈 검증 정보, 벤더 이력 및 검증 진행 중인 모듈 대기열을 조회할 수 있게 합니다.
다른 이름 808bits/fips-mcp, fips-mcp
- 스타
- 0
- Tools
- 6
- 다운로드, 30일
- —
- 최신 버전
- 0.1.0
- 마지막 커밋
- 2026년 9월 3일
- 라이선스
- MIT
FIPS 140 certificate tracker MCP란?
AI 클라이언트가 NIST FIPS 140 암호 모듈 검증 정보, 벤더 이력 및 검증 진행 중인 모듈 대기열을 조회할 수 있게 합니다. 6개 도구를 제공합니다. 예: fips_cert, fips_search, fips_vendor.
프로젝트 README에서 생성된 요약
FIPS 140 certificate tracker MCP server 정보
이 서버는 AI 클라이언트 내부에서 NIST FIPS 140 암호 모듈 검증 정보와 벤더 이력을 조회할 수 있는 기능을 제공합니다. 검증된 모듈, 과거 기록, 검증 진행 중인 모듈 대기열을 포함한 NIST CMVP 데이터에 접근할 수 있습니다. 개발자와 보안 연구자는 인증이나 API 키 없이도 인증서 상태, 종료 날짜, 벤더별 검증 수준을 추적하는 데 이 서버를 활용할 수 있습니다.
서버는 SSE 스트림을 통해 읽기 전용 원격 서비스로 작동합니다. 단일 인증서 번호에 대한 검증 이력을 가져오는 fips_cert와 제품의 현재 검증 여부를 확인하는 fips_search와 같은 특정 도구를 사용합니다. 또한 다른 표준 인터페이스에서는 사용할 수 없는 기능인 교체 모듈의 제출 단계를 추적하는 fips_in_process도 포함되어 있습니다. 사용자는 fips_cve를 사용하여 특정 취약점과 연결된 검증 모듈을 조사할 수도 있습니다.
데이터는 실시간 스크래핑이 아닌 NIST 목록의 스냅샷에서 파생되므로, 모든 응답에는 정보의 최신성을 사용자가 이해할 수 있도록 생성 날짜가 포함됩니다. 서버는 NIST에서 사용하는 철자 변형을 그룹화하여 복잡한 벤더 명칭을 처리하므로, Cisco 또는 Thales와 같은 기업을 검색할 때 다양한 등록 스타일 전반에 걸쳐 완전한 결과를 반환합니다.
활용 사례
- 1암호 모듈 만료 추적하드웨어 또는 소프트웨어 전환을 준비하기 위해 어떤 인증서가 종료 날짜에 도달하는지 확인합니다.
- 2교체 모듈 진행 상황 모니터링대기열 내 현재 단계를 확인하여 벤더가 만료된 검증에 대한 교체 모듈을 제출했는지 판단합니다.
- 3벤더 검증 상태 확인다양한 이름 철자에 걸쳐 특정 회사가 보유한 모든 현재 암호 검증 정보를 검색합니다.
- 4CVE 연관성 감사CPE 매칭을 통해 특정 CVE와 연관된 검증 모듈을 식별합니다.
프로젝트의 README를 바탕으로 작성되었습니다. 모든 활용 사례는 해당 내용의 인용문과 대조하여 확인합니다.
FIPS 140 certificate tracker MCP 설치 방법
형식 확인: 2026년 11월 10일Cursor에 추가Goose에 추가Claude Code에 FIPS 140 certificate tracker MCP 설치
$ claude mcp add --transport http fips-mcp https://fips.808bits.com/mcpCursor에 FIPS 140 certificate tracker MCP 설치
~/.cursor/mcp.json
{
"mcpServers": {
"fips-mcp": {
"url": "https://fips.808bits.com/mcp"
}
}
}VS Code에 FIPS 140 certificate tracker MCP 설치
.vscode/mcp.json
{
"servers": {
"fips-mcp": {
"type": "http",
"url": "https://fips.808bits.com/mcp"
}
}
}VS Code CLI에 FIPS 140 certificate tracker MCP 설치
$ code --add-mcp '{"name":"fips-mcp","type":"http","url":"https://fips.808bits.com/mcp"}'Codex에 FIPS 140 certificate tracker MCP 설치
$ codex mcp add fips-mcp --url https://fips.808bits.com/mcpCodex config.toml에 FIPS 140 certificate tracker MCP 설치
~/.codex/config.toml
[mcp_servers.fips-mcp] url = "https://fips.808bits.com/mcp"
Gemini CLI에 FIPS 140 certificate tracker MCP 설치
$ gemini mcp add -s user --transport http fips-mcp https://fips.808bits.com/mcpGemini settings.json에 FIPS 140 certificate tracker MCP 설치
~/.gemini/settings.json
{
"mcpServers": {
"fips-mcp": {
"url": "https://fips.808bits.com/mcp",
"type": "http"
}
}
}FIPS 140 certificate tracker MCP 도구 6
README에서 감지됨fips_certfips_searchfips_vendorfips_cvefips_in_processfips_sunset
| fips_cert | — | |
| fips_search | — | |
| fips_vendor | — | |
| fips_cve | — | |
| fips_in_process | — | |
| fips_sunset | — |
자동 검사
2026년 11월 15일에 실행됨전체 보고서 →아직 인증되지 않았습니다. 서버는 80점 이상의 점수, 심각한 결함 없음, 그리고 검사에 충분한 데이터를 갖추어야 합니다. 검사 방식 · 점수를 높이기 위해 수정할 항목
- 소스 저장소 연결 및 접근 가능808bits/fips-mcp is public and reachablegithub.com/808bits/fips-mcp ↗통과
- 패키지가 이 저장소를 소스로 명시검사되지 않음
- 빌드 출처(Sigstore 증명)검사되지 않음
- 오픈 소스 라이선스 (OSI)MITspdx.org/licenses/MIT.html ↗통과
- 최근 1년 내 커밋 또는 릴리스Last commit or release 2026-09-03github.com/808bits/fips-mcp ↗통과
- OpenSSF Scorecard검사되지 않음
- 패키지 이름이 인기 패키지와 유사하지 않음검사되지 않음
- 패키지 및 해당 종속성에 중요한 보안 권고 없음검사되지 않음
- 모델에 대한 숨겨진 지침 없음6 tool descriptions and the README read; no override phrases, credential paths or hidden characters통과
- 파괴적인 도구에 라벨 표시됨No tool named like delete, drop or exec통과
- 원격 엔드포인트가 MCP 핸드셰이크에 응답initialize answered with protocol 2025-06-18 in 243 ms통과
README
GitHub에서 보기fips-mcp
An MCP server over the NIST CMVP data behind 808bits.com/fips: every FIPS 140 cryptographic module validation, plus the queue of submissions still awaiting one.
Read-only, no authentication.
https://fips.808bits.com/mcp
claude mcp add --transport http fips https://fips.808bits.com/mcp
The endpoint speaks POST, as the transport requires. Opening either the
hostname or the endpoint in a browser redirects to the tracker. A client's
GET /mcp still gets 405, which is what a stateless server owes a request to
open an SSE stream, and GET / and GET /health return a JSON descriptor with
the data generation dates for anything checking liveness.
Tools
| Tool | Answers |
|---|---|
fips_cert |
Status, level, sunset date and validation history for one certificate number. |
fips_search |
Does this vendor or product hold a current validation, and at what level. |
fips_vendor |
Everything one company holds, across the spelling variants NIST filed it under. |
fips_cve |
Which validated modules are associated with a CVE, and which CVEs touch a vendor's. |
fips_in_process |
Has the vendor's replacement actually been submitted, and what phase is it in. |
fips_sunset |
What expires before a given date, and which vendors are about to have nothing valid. |
fips_in_process is the one with no equivalent elsewhere. NIST publishes the
Modules in Process list as a web page, not as an API, and "it is on MIP" is the
milestone people reach for when a validation has lapsed and the replacement has
not landed.
Reading the data without getting it wrong
A submission in the queue is a milestone, not a date. 181 modules are in process and the phase dates run back more than a year, so plenty have sat in one phase for longer than that. "It is on MIP" says review started.
An absence from the queue can mean the successor already landed. Ribbon's
SBC 5400 sunsets on 2026-09-06 and has held a 140-3 certificate since 2025.
Check fips_search for the module name before reporting a gap.
Vendor names are free text at NIST. Cisco holds certificates under three
spellings, Thales under two. vendor_key groups the variants of one
registration and vendor_display is the spelling NIST used most often. Neither
merges corporate families: the nShield line ran nCipher Corporation to Thales
to Entrust, so folding those together would credit certificates to a company
that sold the product years ago.
112 certificates have no module name or vendor, because NIST published
none. Those come back as null with a note rather than as empty strings.
CVE associations are name-based, not boundary-based. They come from matching the vendor and product CPE, so a listed CVE may sit in code the certificate never covered, and a real flaw inside the boundary may not appear at all. 183 associations across 16 certificates.
An empty CVE result is not a clean bill of health, and this is the more
misleading direction. Only 16 of 5,504 certificates carry any association, the
match does not follow dependencies, and it needs a stable CPE string, so
hardware modules come back empty largely regardless of their advisory history.
fips_cve for CVE-2014-0160 returns nothing. Every empty result says so, and
reports how many certificates carry any association at all, so the number is
in front of the caller rather than in this file.
Sunset dates are not uniform. Most active 140-2 certificates move to the historical list on 2026-09-21, but six carry earlier dates of their own.
Where the data comes from
Everything is derived from NIST's published CMVP lists: the validated modules,
the historical and revoked lists, and the Modules in Process queue. The server
does not scrape NIST on demand. A separate pipeline snapshots the lists, diffs
them against the previous snapshot and loads the result, so answers reflect the
last refresh rather than this minute. Every response carries the generation
date, and GET / reports it too.
This repository holds the server. The dataset it serves is built elsewhere and is not checked in, so a clone will typecheck and deploy but will not have rows to answer with.
Licence
MIT. The certificate data itself is published by NIST and is not covered by it.
FIPS 140 certificate tracker MCP 질문
FIPS 140 certificate tracker MCP를 Claude Code에 추가하려면 어떻게 하나요?
터미널에서 claude mcp add --transport http fips-mcp https://fips.808bits.com/mcp를 실행합니다. 모든 프로젝트에서 사용할 수 있게 하려면 --scope user를 추가합니다.
FIPS 140 certificate tracker MCP를 Cursor에 추가하려면 어떻게 하나요?
~/.cursor/mcp.json를 열고 mcpServers 아래에 서버를 추가합니다. 위 설치 섹션에 표시된 Cursor 구성을 사용합니다.
FIPS 140 certificate tracker MCP는 어떤 도구를 제공하나요?
6개 도구를 제공합니다. 예: fips_cert, fips_search, fips_vendor, fips_cve, fips_in_process.
이 서버에서 현재 NIST 대기열에 있는 모듈 정보를 제공하나요?
네, 일반적으로 API를 통해 확인할 수 없는 검증 대기 중인 제출물 대기열 정보를 포함합니다.
도구의 CVE 연관 정보는 얼마나 정확한가요?
CVE 연관은 벤더 및 제품 CPE를 기반으로 한 이름 기반 방식입니다. 따라서 나열된 CVE가 인증 범위에 포함되지 않는 코드에 있을 수 있거나, 실제 결함이 나타나지 않을 수도 있습니다.
데이터가 실시간으로 제공되나요?
아니요, 이 서버는 NIST를 실시간으로 스크래핑하는 대신 스냅샷 파이프라인을 사용하므로 답변은 마지막 업데이트 날짜를 반영합니다.
벤더 이름의 철자가 다른 경우는 어떻게 처리하나요?
서버는 NIST에서 사용하는 철자 변형을 그룹화하기 위해 vendor_key를 사용하며, 가장 일반적인 철자는 vendor_display에 표시합니다.