MCP server bash
Коммит 21 окт. 2026 г.Позволяет ИИ-ассистенту выполнять bash-команды на локальной машине через защищенный WebSocket-коннектор.
Также известен как assistant-core/mcp-bash
- Звёзды
- 0
- Инструменты
- 3
- Загрузки, 30 дней
- —
- Последняя версия
- —
- Последний коммит
- 21 окт. 2026 г.
- Лицензия
- MIT
Что такое bash MCP?
Позволяет ИИ-ассистенту выполнять bash-команды на локальной машине через защищенный WebSocket-коннектор. Он предоставляет 3 инструмента, например command, timeout_seconds, restart.
Сводка сгенерирована из README проекта
О bash MCP server
mcp-bash позволяет разработчикам, работающим с Assistant Core, выполнять команды терминала напрямую из ИИ-ассистента. Этот сервер выступает в роли локального коннектора, который подключается через WebSocket, связывая вашу машину с ассистентом без необходимости использования публичного URL или открытия портов. Он предоставляет единый инструмент bash, который позволяет модели запускать команды, управлять директориями и получать вывод, такой как stdout и stderr.
Для настройки необходимо запустить коннектор локально, используя специальный токен и URL, предоставленные администратором Assistant Core. Вы можете настроить имя инструмента и ограничить доступ к функционалу bash для определенных интерфейсов, например, мобильного или веб-приложения. Поскольку инструмент может вносить изменения в систему, он предназначен для использования с доверенными ассистентами; рекомендуется запускать его от имени пользователя с низкими привилегиями или внутри rootless-контейнера.
Безопасность обеспечивается системой одобрения, где вы можете разрешать, запрашивать или блокировать определенные паттерны команд. Сервер также ведет аудит-лог в формате jsonl для отслеживания каждой выполненной команды, включая код завершения и длительность выполнения.
Что вы можете с ним делать
- 1Автоматизация повторяющихся задач в терминалеРазработчик может дать ИИ команду выполнить git status или другие часто используемые команды, не вводя их вручную.
- 2Управление несколькими удаленными машинамиВы можете подключить несколько разных компьютеров к одному ассистенту, назначив каждому коннектору уникальное имя инструмента.
- 3Выполнение команд с определенными переменными окруженияВы можете передавать конфиденциальные учетные данные, такие как токены GitHub, в инструмент bash только тогда, когда это требуется для конкретной задачи.
- 4Поддержание длительных соединенийИспользуйте tmux, чтобы bash-коннектор оставался активным даже после вашего отключения от SSH-сессии.
Взято из README проекта. Каждый вариант использования проверен на соответствие цитате из него.
Инструменты bash MCP 3
Определено из READMEcommandtimeout_secondsrestart
| command | — | |
| timeout_seconds | — | |
| restart | — |
Конфигурация
BASH_TOOL_NAMELOCAL_CONNECTOR_TOKENLOCAL_CONNECTOR_URL
| Название | Описание | Тип |
|---|---|---|
| BASH_TOOL_NAME | — | |
| LOCAL_CONNECTOR_TOKEN | — | |
| LOCAL_CONNECTOR_URL | — |
Автоматические проверки
Запущено 14 нояб. 2026 г.Полный отчёт →Еще не проверено. Для сервера требуется оценка 80, отсутствие серьезных проблем и достаточно данных для нашей проверки. Как работают проверки · Что исправить, чтобы получить больше баллов
- Связанный и доступный исходный репозиторийassistant-core/mcp-bash is public and reachablegithub.com/assistant-core/mcp-bash ↗Пройдено
- Пакет указывает этот репозиторий как источникНе проверялось
- Происхождение сборки (аттестация Sigstore)Не проверялось
- Open source лицензия (OSI)MITspdx.org/licenses/MIT.html ↗Пройдено
- Коммит или релиз за последний годLast commit or release 2026-10-21github.com/assistant-core/mcp-bash ↗Пройдено
- OpenSSF ScorecardНе проверялось
- Имя пакета не похоже на популярный пакетНе проверялось
- Нет критических предупреждений в пакете или его зависимостяхНе проверялось
- Нет скрытых инструкций для модели3 tool descriptions and the README read; no override phrases, credential paths or hidden charactersПройдено
- Деструктивные инструменты помеченыNo tool named like delete, drop or execПройдено
- Удалённая конечная точка отвечает на рукопожатие MCPНе проверялось
README
Открыть на GitHubmcp-bash
A minimal MCP server that lets an AI assistant run bash commands on your machine, connected as an Assistant Core local connector. The connector dials out over WebSocket, so the machine needs no public URL or open port.
⚠️ Anyone who can chat with the connected assistant can run commands as your user. Use it only with assistants you trust, run it under a low-privilege account, and stop it when you are done.
Quick start
python -m venv .venv && source .venv/bin/activate
pip install -r requirements.txt
# Assistant Core admin → MCP → Local connector → Add connector (token shown once)
export LOCAL_CONNECTOR_URL="wss://api.assistantcore.com/local-connector/ws"
export LOCAL_CONNECTOR_TOKEN="lc_..."
python connector.py
Then click Refresh tools in the admin: the assistant gets one tool, bash. Assistant Core offers a connector's tools only as the owner last refreshed them, so refresh again after changing BASH_TOOL_NAME, BASH_SURFACES or the server.
You can also put both settings in a .env file (see .env.example). To connect a different stdio MCP server, pass its script: python connector.py my_server.py.
Where the tool is offered
On Assistant Core the tool is offered only in the web and mobile apps (BASH_SURFACES=app), never to website widget visitors, messaging apps, voice devices or the public API, where anyone the assistant talks to could run commands. To widen it, list the surfaces: BASH_SURFACES=app,api. The admin can narrow this further, not widen it.
When it asks first
Assistant Core asks before every command unless a rule says otherwise, because the tool can change anything on the machine. The tool tells Assistant Core which argument holds the command line, so rules can name commands instead of the whole tool:
- On an approval card, tick Don't ask again (for commands starting with
git status) to rungit statuswithout asking next time, in chat and in scheduled tasks. Manage these in Settings → Approvals. - The assistant's owner sets rules for everyone in the admin (Approvals): Allow
git status, Ask fordocker, Blockrm. Block wins over Ask, Ask over Allow.
A command line runs without asking only when every command in it is allowed: git status && rm -rf x still asks. Lines with $(…), backticks, redirections or variables, and commands that run other commands (sudo, bash -c, xargs, python…), are never allowed by a command rule.
After updating this server, refresh tools in the admin once so Assistant Core sees the new definition.
Several machines or several assistants
One assistant, several machines. Add a connector per machine in the admin, each with its own token, and give each machine its own tool name so the model can tell them apart:
# on web01, with web01's token
BASH_TOOL_NAME=web01_bash python connector.py
# on db01, with db01's token
BASH_TOOL_NAME=db01_bash python connector.py
Then refresh tools in the admin. A tool name belongs to the connector that offered it first: a second machine offering the same name is refused, and its log says so. Each token connects one machine at a time, and deleting or regenerating one disconnects only that machine.
One machine, several assistants. A connector token belongs to one assistant, so run one connector per assistant, each with its own token and audit log:
LOCAL_CONNECTOR_TOKEN=lc_AAA BASH_AUDIT_LOG=~/audit-a.jsonl python connector.py
LOCAL_CONNECTOR_TOKEN=lc_BBB BASH_AUDIT_LOG=~/audit-b.jsonl python connector.py
Everyone who can chat with any of those assistants can run commands on the machine.
Limit what commands can reach
The server only starts commands; it does not confine them. For anything beyond a personal machine:
- Run the connector as a dedicated user without
sudo, owning only the directories the assistant should touch. - Better, run it in a rootless container with a read-only root filesystem and one writable volume, and restrict its outbound network if you can: commands can send anything they read to the internet.
- Pass secrets with
BASH_PASS_ENVonly when a task needs them, and reviewaudit.jsonl.
Keep it running on a server
To keep the connector running after you close SSH, start it inside tmux:
tmux new -s connector
cd ~/mcp-bash && source .venv/bin/activate && python connector.py
# Ctrl+B then D to detach; the connector keeps running
tmux attach -t connector # back to the logs
tmux kill-session -t connector # stop it
tmux survives SSH disconnects, but not a server reboot, and nothing restarts the connector if it exits.
The bash tool
| Parameter | Description |
|---|---|
command |
Bash command to run |
timeout_seconds |
1–120, default 30 |
restart |
Start from BASH_WORKDIR instead of where the last command ended |
Returns stdout, stderr, exit_code, timed_out, truncated and cwd (where the command ended).
- The first command starts in
BASH_WORKDIR(default: your home directory); each later one starts where the previous one ended, like a terminal. Environment variables, aliases and functions do not carry over: every call is a new shell. A command that times out keeps the directory it started in. This is a starting point, not a sandbox. - Commands see only a minimal environment (
PATH,HOME,USER,SHELL, locale,TERM,TMPDIR,TZ), so secrets in your shell, including the connector token, never reach the assistant. Pass extra variables explicitly withBASH_PASS_ENV=GITHUB_TOKEN,AWS_PROFILE; anything you pass, the assistant can read. - stdin is closed, so commands that prompt for input fail instead of hanging.
- On timeout the whole process group is killed. A process that starts its own session (
setsid) can outlive it; there is no sandbox to stop that. - Background jobs keep running after the command returns; redirect their output (
cmd > log 2>&1 &), since the result is returned as soon as bash exits. - stdout and stderr are each truncated to 20,000 characters, keeping the first 8,000 and the last 12,000, and memory stays bounded however much a command prints.
- At most 2 commands run at once; extra calls return an error.
- Every command is appended to
audit.jsonlnext tobash_server.py(orBASH_AUDIT_LOG): time, command, starting directory, exit code and duration, not the output. The file is readable only by you. - Requires bash (macOS, Linux, or WSL on Windows).
Reconnection
connector.py reconnects with exponential backoff (1 s up to 10 min), and starts over after a session that stayed up for a minute. If the connector token is regenerated or deleted in the admin, the log says so; restart with the new token. If the relay refuses the connection because the token is already in use or another machine offers the same tool name, the log names the conflict.
Tests
pip install pytest && pytest -q
Вопросы о bash MCP
Какие инструменты предоставляет bash MCP?
Он предоставляет 3 инструмента, включая command, timeout_seconds, restart.
Как запускать bash-команды через этот сервер?
Сервер предоставляет инструмент bash, который принимает строку команды, необязательный таймаут и флаг перезапуска для определения рабочей директории.
Можно ли ограничить список команд, которые разрешено выполнять ассистенту?
Да, администратор Assistant Core может настроить правила: разрешать (Allow), запрашивать подтверждение (Ask) или блокировать (Block) определенные команды, при этом правило Block имеет приоритет.
Как коннектор обрабатывает сетевое соединение?
Коннектор устанавливает исходящее соединение через WebSocket, поэтому машине не требуется публичный URL или открытые порты; для повторных подключений используется алгоритм экспоненциальной задержки (exponential backoff).