Memungkinkan AI agent untuk mengirim dan menerima file, teks, dan media secara aman antara terminal dan perangkat yang terhubung melalui end-to-end encryption.
Juga dikenal sebagai paironce/cli, cli
- Stars
- 0
- Tools
- —
- Unduhan, 30 hari
- —
- Versi terbaru
- 0.11.4
- Commit terakhir
- 7 Nov 2026
- Lisensi
- Apache-2.0
Apa itu PairOnce MCP?
PairOnce adalah MCP server. Memungkinkan AI agent untuk mengirim dan menerima file, teks, dan media secara aman antara terminal dan perangkat yang terhubung melalui end-to-end encryption.
Ringkasan dibuat dari README proyek
Tentang PairOnce MCP server
PairOnce menyediakan cara aman bagi AI agent untuk bertukar file, teks, dan media dengan perangkat pribadi Anda. Dengan menjalankan server melalui perintah npx paironce mcp, agent dapat berinteraksi dengan perangkat apa pun yang menjalankan web browser, seperti iPhone, Android, atau komputer desktop. Setup ini tidak memerlukan akun dan menggunakan end-to-end encryption untuk melindungi data Anda. Koneksi dibangun melalui kode pairing enam digit yang Anda setujui pada perangkat mobile atau desktop Anda.
Developer dapat menggunakan server ini untuk menjembatani celah antara lingkungan terminal dan dunia fisik. Agent dapat mengirim build logs ke ponsel Anda atau meminta item spesifik seperti foto label hardware atau pemindaian dokumen. Server ini menyertakan tool khusus untuk bantuan visual, yang memungkinkan agent meminta frame kamera atau layar untuk memandu Anda melakukan tugas manual. Server akan mempertahankan koneksi selama 30 menit setelah tool call terakhir untuk memastikan workflow berjalan lancar tanpa perlu persetujuan manual yang terus-menerus.
Apa yang bisa Anda lakukan dengannya
- 1Transfer data terminal ke mobileAnda dapat menginstruksikan AI agent untuk mengirim build log atau file tertentu secara langsung ke smartphone Anda.
- 2Menangkap informasi dunia fisikAgent dapat meminta Anda untuk mengambil foto objek tertentu guna membantunya menyelesaikan sebuah tugas.
- 3Menerima dokumen hasil scan ke dalam workspaceAnda dapat meminta agent untuk menunggu Anda mengunggah hasil scan atau foto dari ponsel ke dalam folder lokal.
- 4Panduan visual langkah demi langkahAgent dapat meminta gambar diam secara berkala dari kamera atau layar Anda untuk membantu prosedur yang kompleks.
Ditulis berdasarkan README proyek. Setiap use case diperiksa terhadap kutipan dari README tersebut.
Cara menginstal PairOnce MCP
Format diverifikasi 10 Nov 2026Instal PairOnce MCP di Claude Code
$ claude mcp add cli -- npx -y paironceInstal PairOnce MCP di Cursor
~/.cursor/mcp.json
{
"mcpServers": {
"cli": {
"command": "npx",
"args": [
"-y",
"paironce"
]
}
}
}Instal PairOnce MCP di VS Code
.vscode/mcp.json
{
"servers": {
"cli": {
"type": "stdio",
"command": "npx",
"args": [
"-y",
"paironce"
]
}
}
}Instal PairOnce MCP di Claude Desktop
claude_desktop_config.json
{
"mcpServers": {
"cli": {
"command": "npx",
"args": [
"-y",
"paironce"
]
}
}
}Instal PairOnce MCP di Codex
~/.codex/config.toml
[mcp_servers.cli] command = "npx" args = ["-y", "paironce"]
Instal PairOnce MCP di Gemini CLI
~/.gemini/settings.json
{
"mcpServers": {
"cli": {
"command": "npx",
"args": [
"-y",
"paironce"
]
}
}
}Konfigurasi
PAIRONCE_NAME
| Nama | Deskripsi | Tipe |
|---|---|---|
| PAIRONCE_NAME | — |
Pengecekan otomatis
Berjalan 14 Nov 2026Laporan lengkap →Lolos checks otomatis kami. Ini bukan audit keamanan: baca kodenya dan berikan server akses paling terbatas yang dibutuhkannya. Cara kerja checks
- Source repository terhubung dan dapat dijangkaupaironce/cli is public and reachablegithub.com/paironce/cli ↗Lolos
- Paket menyebut repo ini sebagai sumbernyapaironce names paironce/cli as sourcenpmjs.com/package/paironce ↗Lolos
- Provenance build (atestasi Sigstore)Sigstore attestation for paironcenpmjs.com/package/paironce/v/0.11.4#provenance ↗Lolos
- Lisensi open source (OSI)Apache-2.0spdx.org/licenses/Apache-2.0.html ↗Lolos
- Ada commit atau release dalam satu tahun terakhirLast commit or release 2026-11-07github.com/paironce/cli ↗Lolos
- OpenSSF ScorecardTidak diperiksa
- Nama package tidak mirip dengan package populerNo popular package one edit away from paironceLolos
- Tidak ada advisory kritis di paket maupun dependensinya21 resolved dependencies checked; no critical advisoryosv.dev ↗Lolos
- Tidak ada instruksi tersembunyi untuk model0 tool descriptions and the README read; no override phrases, credential paths or hidden charactersLolos
- Tools yang bersifat destruktif telah diberi labelTidak diperiksa
- Endpoint remote menjawab handshake MCPTidak diperiksa
README
Lihat di GitHubpaironce
Send files and text from a terminal to your own phone or computer with PairOnce. Pair once with
a six-digit code; after that, npx paironce send report.pdf puts the file on your phone. End-to-end encrypted, direct
between the devices whenever the network allows, and through an encrypted relay when it does not. No account.
npx paironce pair # shows a code: type it at paironce.com on your phone
npx paironce send build.zip # sends to the paired device
npx paironce text "https://example.com/some/long/link"
npx paironce receive --to ./inbox # receives files sent from the phone
The other device is any browser with https://paironce.com open: iPhone, Android, Windows, Mac or Linux. Nothing to install there.
Commands
| Command | What it does |
|---|---|
paironce pair |
Shows a six-digit code. On the other device, open paironce.com, choose Enter a code and type it. Both screens show the same safety code; approve the device in the terminal. |
paironce pair 123456 |
Joins with the code the other device shows, for a person at this terminal. |
paironce send <file>... |
Sends files to the paired device. With several paired devices, add --to "<name>". The other device accepts each file before it arrives. |
paironce text "<message>" |
Sends a message or a link. |
paironce receive |
Receives files into the current folder (--to <folder>). Asks before each file; --yes accepts every file during this run. Large files are written straight to disk, so they can be as large as the sender may send, and one cut off continues when it is sent again. |
paironce devices |
Lists paired devices. |
paironce forget <name> |
Forgets a paired device. |
paironce mcp |
Runs as an MCP server for AI agents. |
--name "<name>" (or the PAIRONCE_NAME variable) sets what the other device shows for this one, for example
--name "Build server". The key stays the same, so paired devices still know it. --agent marks this device as an AI
agent on the other device (the MCP server always does). The MCP server stays connected for 30 minutes after its last tool call, so the next task needs no tap on your device; you see it as connected and can end it there. The MCP tools save inside the folder the server runs in (inbox by default). --ephemeral uses a throwaway identity in a temporary folder,
which the other device forgets after a day without a connection: right for a sandbox that is thrown away.
When a paired device is not connected, the command asks it to connect: PairOnce on that device shows "Windows · Terminal wants to reconnect" with a Connect button.
Use it from an AI agent (MCP)
paironce mcp gives an agent ten tools:
| Tool | What it does |
|---|---|
pair_device |
Pairs one of your devices. The agent gives you a six-digit code; you open paironce.com on that device, choose Enter a code and type it. The agent then tells you a safety code, and goes on only after you say your device shows the same. Once per device. |
send_file, send_text |
Sends to a paired device; you accept every file there. |
receive_files |
Waits while you send files from your device (a photo of a whiteboard, a scan, a document) and saves them into ./inbox. |
request_photo, request_scan, request_file |
Asks for something specific, with the reason. Your device shows the request; you take the photo, scan the pages or choose the file there, or decline. Saved into ./inbox. |
watch_frames, watch_stop |
Asks to see your camera or screen, with the reason. You share it on your device, or decline; the agent then gets a still picture each time it asks (at most two a second) and can guide you step by step. Your device shows the share and a stop button; it ends when either side stops it. |
list_devices |
Lists the paired devices. |
The agent reaches only devices you paired and approved, and nothing arrives anywhere unasked. Your device marks it Agent when it asks to be approved and in your saved devices. Design and plans: Agent as a Device.
send_file does not send hidden files and folders (such as .env or .ssh), Windows's AppData, a Mac's Library or this
device's own PairOnce files; you can still send those yourself with paironce send. A file that arrives after receive_files
or a request stopped waiting is saved in the folder it was accepted for, and the next receive_files reports it. Changes in
each version are in the releases.
Claude Code:
claude mcp add paironce -e PAIRONCE_NAME="Claude Code · Agent" -- npx -y paironce mcp
# in a throwaway sandbox: ... -- npx -y paironce mcp --ephemeral
# on Windows, through cmd: claude mcp add paironce -- cmd /c npx -y paironce mcp
Other clients (Cursor, Claude Desktop and others), in their MCP configuration:
{ "mcpServers": { "paironce": { "command": "npx", "args": ["-y", "paironce", "mcp"], "env": { "PAIRONCE_NAME": "Cursor · Agent" } } } }
Then ask: "pair with my phone", "send the build log to my phone", or let the agent ask you: "I need a photo of the label on the back of the router".
How it works
The CLI runs the same connection code as paironce.com: the PairOnce protocol and @paironce/core for pairing and encryption, with WebRTC from node-datachannel for direct connections and @roamhq/wrtc (libwebrtc) for the relay. Files and messages are encrypted on this computer and decrypted on the other device; the PairOnce service only introduces the two devices and, when needed, relays encrypted bytes it cannot read.
This computer's device key and the list of paired devices are kept in ~/.paironce (or $PAIRONCE_HOME), readable only
by you. The private key never leaves this computer.
It connects directly whenever the networks allow it, otherwise through the encrypted relay over UDP, TCP or TLS on port
443, and where even that is blocked, through the PairOnce tunnel: the same encrypted data over a secure WebSocket to
paironce.com. So it works on servers, in containers that block UDP, and behind a web proxy (HTTPS_PROXY is used
automatically). In a cloud sandbox with an allow-list, such as Claude Code on the web, add paironce.com to the allowed
domains. PAIRONCE_DEBUG=1 shows each step of connecting.
Requires Node.js 22 or later on Windows, macOS (x64 and arm64) or Linux (x64 and arm64).
License
Apache-2.0. PairOnce is a trademark of its owner; see https://paironce.com.
Pertanyaan tentang PairOnce MCP
Bagaimana cara menambahkan PairOnce MCP ke Claude Code?
Jalankan claude mcp add cli -- npx -y paironce di terminal Anda. Tambahkan --scope user agar tersedia di semua proyek.
Bagaimana cara menambahkan PairOnce MCP ke Cursor?
Buka ~/.cursor/mcp.json dan tambahkan server di bawah mcpServers, menggunakan config Cursor yang ditunjukkan di bagian instalasi di atas.
Bagaimana cara menghubungkan perangkat saya dengan AI agent?
Agent akan memberikan kode enam digit yang perlu Anda masukkan ke paironce.com di perangkat Anda, lalu Anda cukup menyetujui safety code yang muncul di kedua layar tersebut.
Apakah data saya tetap privat selama proses transfer?
Ya, semua file dan pesan dienkripsi secara end-to-end, dan private key tidak akan pernah meninggalkan komputer Anda.
Apakah agent harus terus terhubung setiap saat?
MCP server akan tetap terhubung selama 30 menit setelah tool call terakhir untuk memungkinkan tugas berikutnya tanpa perlu melakukan pairing ulang.