Memungkinkan AI agent untuk melakukan stamping, upgrade, dan verifikasi bukti dokumen terhadap blockchain Bitcoin menggunakan protokol OpenTimestamps.
Juga dikenal sebagai OTSkit/OTSkit-MCP, @otskit/mcp
- Stars
- 3
- Tools
- 9
- Unduhan, 30 hari
- —
- Versi terbaru
- 0.2.1
- Commit terakhir
- 12 Nov 2026
- Lisensi
- MIT
Apa itu OTSkit MCP?
Memungkinkan AI agent untuk melakukan stamping, upgrade, dan verifikasi bukti dokumen terhadap blockchain Bitcoin menggunakan protokol OpenTimestamps. Server ini menyediakan 9 tool, seperti create_timestamp, upgrade_timestamp, verify_timestamp.
Ringkasan dibuat dari README proyek
Tentang OTSkit MCP server
Developer dapat melakukan timestamping dokumen terhadap blockchain Bitcoin menggunakan MCP server ini. Server ini memberikan kemampuan kepada AI agent untuk membuat, memantau, dan memvalidasi bukti menggunakan protokol OpenTimestamps. Dengan menghubungkannya ke agent seperti Claude Desktop, Claude Code, atau Codex, server ini memungkinkan pembuatan catatan yang immutable melalui hashing SHA-256 dan integrasi Bitcoin calendar.
User berinteraksi dengan server melalui tools seperti stamp_file untuk melakukan hashing dan timestamp pada file lokal dalam satu langkah, atau verify_timestamp untuk membuktikan bahwa sebuah hash sudah ada sebelum blok Bitcoin tertentu. Sistem ini mengelola data secara lokal menggunakan database SQLite di direktori user dan menangani transisi bukti dari status pending ke status confirmed. Server ini juga menyertakan fungsi khusus seperti watch untuk memantau konfirmasi jaringan dan upgrade_timestamp untuk memeriksa inklusi blok Bitcoin, memastikan agent dapat mengelola lifecycle sebuah bukti tanpa intervensi manual.
Ditulis berdasarkan README proyek. Setiap use case diperiksa terhadap kutipan dari README tersebut.
Cara menginstal OTSkit MCP
Format diverifikasi 10 Nov 2026Tambahkan ke CursorTambahkan ke GooseInstal OTSkit MCP di Claude Code
$ claude mcp add otskit-mcp -- npx -y @otskit/mcpInstal OTSkit MCP di Cursor
~/.cursor/mcp.json
{
"mcpServers": {
"otskit-mcp": {
"command": "npx",
"args": [
"-y",
"@otskit/mcp"
]
}
}
}Instal OTSkit MCP di VS Code
.vscode/mcp.json
{
"servers": {
"otskit-mcp": {
"type": "stdio",
"command": "npx",
"args": [
"-y",
"@otskit/mcp"
]
}
}
}Instal OTSkit MCP di VS Code CLI
$ code --add-mcp '{"name":"otskit-mcp","type":"stdio","command":"npx","args":["-y","@otskit/mcp"]}'Instal OTSkit MCP di Claude Desktop
claude_desktop_config.json
{
"mcpServers": {
"otskit-mcp": {
"command": "npx",
"args": [
"-y",
"@otskit/mcp"
]
}
}
}Instal OTSkit MCP di Codex
$ codex mcp add otskit-mcp -- npx -y @otskit/mcpInstal OTSkit MCP di Codex config.toml
~/.codex/config.toml
[mcp_servers.otskit-mcp] command = "npx" args = ["-y", "@otskit/mcp"]
Instal OTSkit MCP di Gemini CLI
$ gemini mcp add -s user otskit-mcp npx -- -y @otskit/mcpInstal OTSkit MCP di Gemini settings.json
~/.gemini/settings.json
{
"mcpServers": {
"otskit-mcp": {
"command": "npx",
"args": [
"-y",
"@otskit/mcp"
]
}
}
}Tool OTSkit MCP 9
Terdeteksi dari READMEcreate_timestampupgrade_timestampverify_timestampverify_external_proofinspect_timestamplist_pendingwatchhash_filestamp_file
| create_timestamp | — | |
| upgrade_timestamp | — | |
| verify_timestamp | — | |
| verify_external_proof | — | |
| inspect_timestamp | — | |
| list_pending | — | |
| watch | — | |
| hash_file | — | |
| stamp_file | — |
Pengecekan otomatis
Berjalan 13 Nov 2026Laporan lengkap →Lolos checks otomatis kami. Ini bukan audit keamanan: baca kodenya dan berikan server akses paling terbatas yang dibutuhkannya. Cara kerja checks
- Source repository terhubung dan dapat dijangkauLolos
- Lisensi open source (OSI)Lolos
- Ada commit atau release dalam satu tahun terakhirLolos
- Nama package tidak mirip dengan package populerLolos
- Remote endpoint menggunakan HTTPSTidak diperiksa
- Tools yang bersifat destruktif telah diberi labelLolos
- Tidak ada instruksi tersembunyi untuk modelLolos
- Tidak ada advisory kritis pada paket atau dependensinyaLolos
README
Lihat di GitHub@otskit/mcp
OpenTimestamps MCP server - stamp, upgrade, and verify Bitcoin timestamps via AI agents.
Exposes a set of tools to any MCP-compatible agent so it can timestamp documents, monitor confirmation status, and verify proofs against the Bitcoin blockchain - all from a conversation.
This is an independent implementation of the OpenTimestamps protocol. It is not affiliated with, endorsed by, or maintained by the OpenTimestamps project.
Note on confirmation times: After stamping, a proof is
pendinguntil Bitcoin confirms it. Confirmations typically arrive within ~60 minutes, but can take several hours during network congestion. Useots-mcp watchorupgrade_timestampto monitor. A pending proof is not a failed proof.
Install
npm install -g @otskit/mcp
Agent setup
ots-mcp setup claude # Claude Desktop
ots-mcp setup claude-code # Claude Code CLI
ots-mcp setup codex # Codex CLI
Each command writes the MCP entry into the agent's config file, makes a .bak backup if the file already exists, and skips if ots-mcp is already configured. Restart the agent afterwards to apply the changes.
CLI commands
| Command | Description |
|---|---|
ots-mcp serve |
Start the MCP server (stdio transport) |
ots-mcp stamp <sha256> |
Stamp a SHA-256 hash against Bitcoin calendars |
ots-mcp upgrade <id> |
Check if a pending stamp has been confirmed |
ots-mcp verify <id> |
Verify a stamp against Bitcoin |
ots-mcp list [status] |
List stamps (pending / confirmed / failed) |
ots-mcp watch [minutes] |
Monitor pending stamps and attempt due upgrades (default: 30 min, minimum: 15 min) |
ots-mcp check-pending |
Run one upgrade pass over all pending stamps |
ots-mcp scheduler install|remove|status |
Manage OS-level scheduler for auto-upgrades |
ots-mcp backup [dest] |
Backup the SQLite database |
ots-mcp setup <claude|claude-code|codex> |
Configure MCP for an agent |
MCP tools exposed to agents
| Tool | Description |
|---|---|
create_timestamp |
Stamp a SHA-256 hash against 4 public OTS calendars |
upgrade_timestamp |
Check if a pending stamp has been confirmed in Bitcoin |
verify_timestamp |
Verify a stamp - proves hash existed before a given Bitcoin block |
verify_external_proof |
Verify a whitelisted local file against its external .ots proof, without changing the local stamp store |
inspect_timestamp |
Inspect a stored proof file without network calls |
list_pending |
List stamps with status, retry count, and filters |
watch |
Open a terminal window monitoring pending stamps and attempting due upgrades |
hash_file |
Compute the SHA-256 of a local file and return it as a 64-char hex string (no network calls) |
stamp_file |
Compute SHA-256 of a local file and stamp it on Bitcoin in one step |
Data directory
All data is stored in ~/.ots-mcp/:
~/.ots-mcp/
ots-mcp.db # SQLite database (stamps, proof files)
config.json # Optional config overrides
ots-mcp.log # Log file
Configuration
Create ~/.ots-mcp/config.json to override defaults:
{
"stamp_enabled": true,
"scheduler_interval_minutes": 30,
"retry_max_attempts": 20,
"calendar_timeout_ms": 10000,
"calendars": [
"https://alice.btc.calendar.opentimestamps.org",
"https://bob.btc.calendar.opentimestamps.org",
"https://finney.calendar.eternitywall.com",
"https://btc.calendar.catallaxy.com"
]
}
Development
npm run build # production build
npm run dev # watch mode
npm test # run tests
Dependencies
@otskit/client- OTS calendar client (brings in@otskit/core, the protocol engine)@modelcontextprotocol/sdk- MCP SDKnode-sqlite3-wasm- local database (pure WASM, no native compilation)
Requires Node.js >= 20.
Pertanyaan tentang OTSkit MCP
Bagaimana cara menambahkan OTSkit MCP ke Claude Code?
Jalankan claude mcp add otskit-mcp -- npx -y @otskit/mcp di terminal Anda. Tambahkan --scope user agar tersedia di semua proyek.
Bagaimana cara menambahkan OTSkit MCP ke Cursor?
Buka ~/.cursor/mcp.json dan tambahkan server di bawah mcpServers, menggunakan config Cursor yang ditunjukkan di bagian instalasi di atas.
Tool apa yang disediakan OTSkit MCP?
Server ini menyediakan 9 tool, termasuk create_timestamp, upgrade_timestamp, verify_timestamp, verify_external_proof, inspect_timestamp.
Di mana data disimpan?
Semua data, termasuk database SQLite dan file log, disimpan di direktori ~/.ots-mcp/.