MCP server de DevCycle
Commit 9 nov 2026Permite que los asistentes de codificación con IA creen, actualicen y gestionen feature flags, variables, variaciones y reglas de segmentación de DevCycle directamente desde el editor.
También conocido como DevCycleHQ/cli, cli
- Stars
- 20
- Herramientas
- —
- Descargas, 30 días
- —
- Última versión
- 6.6.1
- Último commit
- 9 nov 2026
- Licencia
- MIT
¿Qué es DevCycle MCP?
DevCycle es un MCP server. Permite que los asistentes de codificación con IA creen, actualicen y gestionen feature flags, variables, variaciones y reglas de segmentación de DevCycle directamente desde el editor.
Resumen generado a partir del README del proyecto
Acerca del MCP server de DevCycle
Gestionar feature flags y reglas de segmentación directamente desde tu entorno de desarrollo es lo que este MCP server permite a los desarrolladores que usan Cursor o Claude. Al conectarse a un servidor de DevCycle alojado, los asistentes de IA obtienen la capacidad de crear, actualizar y supervisar todo el ciclo de vida de la gestión de funciones sin necesidad de una instalación local. La configuración se realiza mediante una configuración sencilla en los ajustes de tu editor, utilizando OAuth para una autenticación segura durante el primer uso.
Esta integración permite que tu IA interactúe con componentes complejos de DevCycle, incluyendo features, variables, variaciones y reglas de segmentación. Más allá de la simple gestión de flags, la tecnología subyacente admite flujos de trabajo avanzados para desarrolladores, como la detección del uso de variables dentro de una base de código, la generación de definiciones de tipos en TypeScript para implementaciones con seguridad de tipos y la gestión de overrides de self-targeting. Este puente entre tu asistente de IA y DevCycle garantiza que el despliegue de funciones y los cambios de configuración ocurran directamente dentro de tu flujo de trabajo de desarrollo actual.
Qué puedes hacer con él
- 1Gestión automatizada de feature flagsPide a tu asistente de IA que cree o modifique feature flags y reglas de segmentación directamente en tu editor.
- 2Auditoría de variables en la base de códigoSolicita una lista de todos los usos de variables de DevCycle que estén presentes actualmente en tu código fuente.
- 3Implementación de flags con seguridad de tiposHaz que el asistente genere definiciones de TypeScript para asegurar que el uso de tus feature flags sea type-safe.
- 4Pruebas rápidas con overridesIndica a la IA que cambie los valores de las variables utilizando self-targeting overrides para realizar pruebas rápidas.
Escrito a partir del README del proyecto. Cada caso de uso se verifica con una cita del mismo.
Cómo instalar DevCycle MCP
Formatos verificados el 10 nov 2026Añadir a CursorAñadir a GooseInstalar DevCycle MCP en Claude Code
$ claude mcp add --transport http cli https://mcp.devcycle.com/mcpInstalar DevCycle MCP en Cursor
~/.cursor/mcp.json
{
"mcpServers": {
"cli": {
"url": "https://mcp.devcycle.com/mcp"
}
}
}Instalar DevCycle MCP en VS Code
.vscode/mcp.json
{
"servers": {
"cli": {
"type": "http",
"url": "https://mcp.devcycle.com/mcp"
}
}
}Instalar DevCycle MCP en VS Code CLI
$ code --add-mcp '{"name":"cli","type":"http","url":"https://mcp.devcycle.com/mcp"}'Instalar DevCycle MCP en Codex
$ codex mcp add cli --url https://mcp.devcycle.com/mcpInstalar DevCycle MCP en Codex config.toml
~/.codex/config.toml
[mcp_servers.cli] url = "https://mcp.devcycle.com/mcp"
Instalar DevCycle MCP en Gemini CLI
$ gemini mcp add -s user --transport http cli https://mcp.devcycle.com/mcpInstalar DevCycle MCP en Gemini settings.json
~/.gemini/settings.json
{
"mcpServers": {
"cli": {
"url": "https://mcp.devcycle.com/mcp",
"type": "http"
}
}
}Verificaciones automáticas
Ejecutado 13 nov 2026Informe completo →Aún no verificado. Un servidor necesita una puntuación de 80, ningún hallazgo grave y suficientes datos para que podamos revisarlo. Cómo funcionan las verificaciones · Qué corregir para obtener más puntos
- Repositorio de origen vinculado y accesibledevcyclehq/cli is public and reachablegithub.com/devcyclehq/cli ↗Aprobado
- El paquete indica este repositorio como su origenNo verificado
- Procedencia de la compilación (atestación de Sigstore)No verificado
- Licencia de código abierto (OSI)MITspdx.org/licenses/MIT.html ↗Aprobado
- Commit o lanzamiento en el último añoLast commit or release 2026-11-09github.com/devcyclehq/cli ↗Aprobado
- OpenSSF ScorecardNo verificado
- El nombre del paquete no es similar a un paquete popularNo verificado
- No hay avisos críticos en el paquete ni en sus dependenciasNo verificado
- Sin instrucciones ocultas para el modelo0 tool descriptions and the README read; no override phrases, credential paths or hidden charactersAprobado
- Las herramientas destructivas están etiquetadasNo verificado
- El endpoint remoto responde al handshake de MCPHTTPS endpoint answered 401 (sign-in required)Aprobado
README
Ver en GitHubDevCycle CLI & MCP Server
This repository contains the DevCycle CLI for managing feature flags from the command line, plus an MCP (Model Context Protocol) server that enables AI coding assistants to interact with DevCycle.
Major features include:
- Fully manage your Features, Variables, Variations and Targeting Rules from the command line
- Detect and list DevCycle Variable usages in your codebase
- Manage your Self-Targeting Overrides to quickly switch between Variable values
- Generate type definitions for type-safe usage of DevCycle (Typescript only)
- MCP (Model Context Protocol) server for AI-powered feature flag management with Cursor and Claude
The CLI can be customized in several ways using command-line args or by creating a configuration file.
- Command Topics
- Pattern captures the key including surrounding quotes
- Pattern strips quotes, capturing only the content
MCP Server for AI Assistants
The DevCycle MCP (Model Context Protocol) server enables AI coding assistants like Cursor and Claude to manage feature flags directly from your development environment. DevCycle offers a hosted MCP server that requires no local installation.
Quick Setup (No Installation Required)
-
Configure your AI assistant to use the hosted MCP server:
-
Cursor: Add to
.cursor/mcp_settings.json:{ "mcpServers": { "devcycle": { "url": "https://mcp.devcycle.com/mcp" } } } -
Claude Desktop: Add to your Claude config file:
{ "mcpServers": { "devcycle": { "command": "npx", "args": [ "mcp-remote", "https://mcp.devcycle.com/mcp" ] } } }
-
-
That's it! The server will guide you through OAuth authentication when you first use it.
Your AI assistant can now create, update, and manage feature flags on your behalf.
For local installation options, detailed configuration, available tools, and advanced usage, see the complete MCP documentation.
CLI Documentation
Setup
Install the CLI
Using NPM
$ npm install -g @devcycle/cli
Or alternatively, using homebrew
$ brew tap devcyclehq/cli
$ brew install devcycle
Authentication
Many of the CLI commands require DevCycle API authorization. There are several ways to provide these credentials.
Using Access Tokens (preferred)
Login Command
By using the login sso command, the CLI will retrieve and store an access token, which is valid for 24 hours.
The login again command can be used to retrieve a new access token using the saved project and organization without prompting for them.
This process will open browser windows to interact with the DevCycle universal login page. It will first obtain a personal access token, then prompt you to choose an organization. A second browser window is used to authenticate the CLI with your chosen organization.
To switch organizations once logged in, the organizations select command can be used.
If executing the CLI in a containerized environment, please ensure one of the following PORTs can be accessed via Port Forwarding: 2194 (default), 2195, 2196 or 8080. This will allow the authentication process to complete and set the access token appropriately.
Repo Init Command
The repo init command behaves in the same way as login sso, but creates a repo configuration file and stores the project and organization choices there instead.
Using Client Credentials
Client Credentials in Auth File
Use the dvc status command to find the configuration file location for your platform. The credentials can be stored in the file pointed to by the Auth config path. Create the file if it does not exist, with the following contents.
clientCredentials:
client_id: <your client id>
client_secret: <your client secret>
This file should not be checked in to version control.
The default location is based on the oclif configDir
If you intend to run the CLI using options that override config file locations, the dvc status command command can be run with those options to confirm that the file locations are as expected.
Project Selection
You also need to specify the default project ID for the CLI to use.
If there is a repo configuration file, the dvc diff and dvc usages commands will use the project defined there.
Otherwise, this is chosen during login or set using the project select command
Environment Variables
Set the following environment variables:
$ export DEVCYCLE_CLIENT_ID=<your client id>
$ export DEVCYCLE_CLIENT_SECRET=<your client secret>
$ export DEVCYCLE_PROJECT_KEY=<your project key>
Command-Line Arguments
The CLI can be run with the following arguments:
$ dvc --client-id=<your client id> --client-secret=<your client secret> --project=<your project key>
Github Action
The Devcycle Github actions are configured with auth information through the project-key, client-id and client-secret configuration parameters. This is passed to the CLI via command line arguments.
Usage
$ npm install -g @devcycle/cli
$ dvc COMMAND
running command...
$ dvc (--version)
@devcycle/cli/6.6.1 linux-x64 node-v24.21.0
$ dvc --help [COMMAND]
USAGE
$ dvc COMMAND
...
Command Topics
dvc alias- Manage repository variable aliases.dvc autocomplete- display autocomplete installation instructionsdvc cleanup- Replace a DevCycle variable with a static value in the current version of your code. Currently only JavaScript is supported.dvc diff- Print a diff of DevCycle variable usage between two versions of your code.dvc environments- Create a new Environment for an existing Feature.dvc features- Create, view, or modify Features with the Management API.dvc generate- Generate Devcycle related files.dvc help- Display help for dvc.dvc identity- View or manage your DevCycle Identity.dvc keys- Retrieve SDK keys from the Management API.dvc login- Log in to DevCycle.dvc logout- Discards any auth configuration that has been stored in the auth configuration file.dvc organizations- List or switch organizations.dvc overrides- Create, view, or modify Overrides for a Project with the Management API.dvc projects- Create, or view Projects with the Management API.dvc repo- Manage repository configuration.dvc status- Check CLI status.dvc targeting- Create, view, or modify Targeting Rules for a Feature with the Management API.dvc usages- Print all DevCycle variable usages in the current version of your code.dvc variables- Create, view, or modify Variables with the Management API.dvc variations- Create a new Variation for an existing Feature.
Repo Configuration
The following commands can only be run from the root of a configured repository
Many of the options available as command-line args can also be specified using a repo configuration file. The default
location for this file is <REPO ROOT>/.devcycle/config.yml.
This location can be overridden using the --repo-config-path flag.
The configuration file format is documented below:
## the project and organization to use when connecting to the DevCycle Rest API for this repo
project: "project-key"
org:
id: "org_xxxxxx"
name: "unique-org-key"
display_name: "Human Readable Org Name"
## block for configuring "code insights" features like diff and variable usage scanning
## use this section to improve the detection of DevCycle usage within your code
codeInsights:
## add additional names to check for when looking for instances of DVCClient from an SDK
clientNames:
- "dvcClient"
## map the values used in your code to the corresponding variable key in DevCycle
variableAliases:
"VARIABLES.ENABLE_V1": "enable-v1"
## additional regex patterns used to match variables for a specific file extension
matchPatterns:
## file extension to override for, containing a list of patterns to use
js:
- dvcClient\.variable\(\s*["']([^"']*)["']
## an array of file glob patterns to include in usage scan
includeFiles:
- "*.[jt]s"
## an array of file glob patterns to exclude from usage scan
excludeFiles:
- "dist/*"
Match Patterns and Aliases
When identifying variable usages in the code, the CLI will identify DevCycle SDK methods by default. To capture other usages you may define match patterns. Match patterns are defined by file extension.
:::note Each pattern must include exactly one capture group for the variable key. Capture the entire key value (including surrounding quotes if you choose the “with quotes” pattern). :::
Match patterns can be defined in the configuration file, for example:
codeInsights:
matchPatterns:
js:
- customVariableGetter\(\s*["']([^"']*)["']
ts:
- customVariableGetter\(\s*["']([^"']*)["']
jsx:
- customVariableHook\(\s*["']([^"']*)["']
- customVariableGetter\(\s*["']([^"']*)["']
tsx:
- customVariableHook\(\s*["']([^"']*)["']
- customVariableGetter\(\s*["']([^"']*)["']
Capturing with or without quotes
Match patterns can capture variable keys with or without quotes, which affects whether aliases are needed:
With quotes:
# Pattern captures the key including surrounding quotes
- dvcClient\.variable\(\s*(["'][^"']*["'])\s*,
- Matches:
dvcClient.variable('my-variable', default) - Captures:
'my-variable'(with quotes)
Without quotes (aliases or generated constants required):
# Pattern strips quotes, capturing only the content
- dvcClient\.variable\(\s*["']([^"']*)["']
- Matches:
dvcClient.variable('my-variable', default) - Captures:
my-variable
Match patterns can also be passed directly to relevant commands using the --match-pattern flag:
dvc usages --match-pattern ts="customVariableGetter\(\s*["']([^"']*)["']" js="customVariableGetter\(\s*["']([^"']*)["']"
When testing your regex the --show-regex flag can be helpful. This will print all patterns used to find matches in your codebase.
dvc usages --show-regex
Custom Wrapper Functions
If you use wrapper functions around the SDK, add patterns for them.
Example: Custom wrapper functions
codeInsights:
matchPatterns:
ts:
# Matches: getFeatureFlag('my-variable', defaultValue)
- getFeatureFlag\(\s*([^,)]*)\s*,
# Matches: isFeatureEnabled('my-variable')
- isFeatureEnabled\(\s*([^,)]*)\s*\)
tsx:
# Matches: useFeatureFlag('my-variable', defaultValue)
- useFeatureFlag\(\s*([^,)]*)\s*,
Preguntas sobre DevCycle MCP
¿Cómo agrego DevCycle MCP a Claude Code?
Ejecuta claude mcp add --transport http cli https://mcp.devcycle.com/mcp en tu terminal. Añade --scope user para que esté disponible en todos los proyectos.
¿Cómo agrego DevCycle MCP a Cursor?
Abre ~/.cursor/mcp.json y añade el servidor en mcpServers, usando la configuración de Cursor que se muestra en la sección de instalación de arriba.
¿El MCP server de DevCycle requiere autenticación OAuth?
Sí, el servidor alojado te guiará a través del proceso de autenticación OAuth la primera vez que lo uses.
¿Qué puede hacer un asistente de IA con las feature flags de DevCycle a través de MCP?
Puede crear, actualizar y gestionar feature flags en tu nombre, incluyendo características, variables, variaciones y reglas de segmentación.
¿Qué asistentes de IA funcionan con el MCP server de DevCycle?
Está diseñado para asistentes de codificación con IA como Cursor y Claude, e incluye fragmentos de configuración para ambos.