MCP server de CallNode
Commit 22 oct 2026Permite que los asistentes de IA lean el historial de llamadas y mensajes, envíen SMS/MMS y realicen llamadas utilizando números de teléfono de CallNode.
También conocido como cnchg/CallNode
- Stars
- 0
- Herramientas
- 13
- Descargas, 30 días
- —
- Última versión
- 1.0.0
- Último commit
- 22 oct 2026
- Licencia
- MIT
¿Qué es CallNode MCP?
CallNode es un MCP server. Permite que los asistentes de IA lean el historial de llamadas y mensajes, envíen SMS/MMS y realicen llamadas utilizando números de teléfono de CallNode. Expone 13 herramientas, como list_numbers, get_number, list_calls.
Resumen generado a partir del README del proyecto
Acerca del MCP server de CallNode
CallNode ofrece un MCP server alojado que conecta tus números de teléfono de CallNode directamente con asistentes de IA. Esta configuración permite a los usuarios integrar capacidades de comunicación en plataformas como Claude Desktop, ChatGPT, Cursor y VS Code sin necesidad de instalar software local. Al proporcionar una URL de servidor y utilizar un proceso de consentimiento basado en OAuth, puedes otorgar permiso a un asistente para interactuar con los números de teléfono específicos que hayas seleccionado en tu panel de control.
Una vez conectado, el asistente puede realizar diversas tareas de comunicación mediante herramientas como send_message, place_call y list_messages. Puedes gestionar los permisos de forma granular, eligiendo si la IA puede leer el historial, enviar SMS/MMS o gestionar tu agenda de contactos. El sistema incluye funciones de seguridad, como un límite de envío por hora y restricciones de horario para asegurar que los mensajes y las llamadas se realicen durante horas locales apropiadas. Esto lo convierte en una solución práctica para desarrolladores que desean automatizar tareas de telefonía a través de una interfaz conversacional.
Qué puedes hacer con él
- 1Revisar el historial de comunicaciónPide a tu asistente de IA que resuma interacciones recientes o que verifique el estado de mensajes anteriores.
- 2Automatizar el envío de mensajesIndica al asistente que envíe un texto o una imagen a un contacto o número de teléfono específico.
- 3Ejecutar llamadas de vozHaz que la IA realice una llamada telefónica utilizando un agente de voz para gestionar la conversación según tus instrucciones.
- 4Gestionar listas de contactosUtiliza el asistente para buscar nombres en tu agenda o añadir nuevos contactos a tu directorio.
Escrito a partir del README del proyecto. Cada caso de uso se verifica con una cita del mismo.
Cómo instalar CallNode MCP
Formatos verificados el 10 nov 2026Añadir a CursorAñadir a GooseInstalar CallNode MCP en Claude Code
$ claude mcp add --transport http callnode https://mcp.callnode.io/mcpInstalar CallNode MCP en Cursor
~/.cursor/mcp.json
{
"mcpServers": {
"callnode": {
"url": "https://mcp.callnode.io/mcp"
}
}
}Instalar CallNode MCP en VS Code
.vscode/mcp.json
{
"servers": {
"callnode": {
"type": "http",
"url": "https://mcp.callnode.io/mcp"
}
}
}Instalar CallNode MCP en VS Code CLI
$ code --add-mcp '{"name":"callnode","type":"http","url":"https://mcp.callnode.io/mcp"}'Instalar CallNode MCP en Codex
$ codex mcp add callnode --url https://mcp.callnode.io/mcpInstalar CallNode MCP en Codex config.toml
~/.codex/config.toml
[mcp_servers.callnode] url = "https://mcp.callnode.io/mcp"
Instalar CallNode MCP en Gemini CLI
$ gemini mcp add -s user --transport http callnode https://mcp.callnode.io/mcpInstalar CallNode MCP en Gemini settings.json
~/.gemini/settings.json
{
"mcpServers": {
"callnode": {
"url": "https://mcp.callnode.io/mcp",
"type": "http"
}
}
}Herramientas de CallNode MCP 13
Detectado desde el READMElist_numbersget_numberlist_callsget_callplace_calllist_messagesget_messagesend_messagelist_phone_bookadd_phone_book_contactremove_phone_book_contactget_balance
| list_numbers | — | |
| get_number | — | |
| list_calls | — | |
| get_call | — | |
| place_call | — | |
| list_messages | — | |
| get_message | — | |
| send_message | — | |
| list_phone_book | — | |
| add_phone_book_contact | — | |
| remove_phone_book_contact | — | |
| get_balance | — |
Mostrar las 13 herramientasMostrar menos herramientas
get_updates
| get_updates | — |
Verificaciones automáticas
Ejecutado 14 nov 2026Informe completo →Aún no verificado. Un servidor necesita una puntuación de 80, ningún hallazgo grave y suficientes datos para que podamos revisarlo. Cómo funcionan las verificaciones · Qué corregir para obtener más puntos
- Repositorio de origen vinculado y accesiblecnchg/callnode is public and reachablegithub.com/cnchg/callnode ↗Aprobado
- El paquete indica este repositorio como su origenNo verificado
- Procedencia de la compilación (atestación de Sigstore)No verificado
- Licencia de código abierto (OSI)MITspdx.org/licenses/MIT.html ↗Aprobado
- Commit o lanzamiento en el último añoLast commit or release 2026-10-22github.com/cnchg/callnode ↗Aprobado
- OpenSSF ScorecardNo verificado
- El nombre del paquete no es similar a un paquete popularNo verificado
- No hay avisos críticos en el paquete ni en sus dependenciasNo verificado
- Sin instrucciones ocultas para el modelo13 tool descriptions and the README read; no override phrases, credential paths or hidden charactersAprobado
- Las herramientas destructivas están etiquetadasNo verificado
- El endpoint remoto responde al handshake de MCPHTTPS endpoint answered 401 (sign-in required)Aprobado
README
Ver en GitHubCallNode MCP server
Your CallNode phone numbers, inside your AI assistant.
CallNode hosts a Model Context Protocol (MCP) server at:
https://mcp.callnode.io/mcp
Sign in to it from claude.ai, Claude Desktop, ChatGPT, Claude Code, Cursor or VS Code, then tick the numbers the assistant may use. It can then:
- read your call and message history;
- send texts and picture messages;
- call or text your Phone Book contacts by name;
- once you switch calling on, place calls that the CallNode voice agent runs.
The server is hosted by CallNode, so there is nothing to install or run. This repository holds only the connection details: client configs, the registry entry and this README.
- What it can do, in plain words: https://callnode.io/integrations/mcp
- Every tool, permission, limit and error code: https://callnode.io/docs/mcp
Before you connect
- Create an account at https://callnode.io/signup (no credit card to start) and get a number. Self-serve numbers are local and toll-free numbers in the US and Canada.
- Open Dashboard → MCP Server, switch MCP access on, and tick the numbers an assistant may use. Every connection shares this one list; a number you did not tick cannot be read from or sent from.
Connect
You give the client only the server URL. It sends you to the CallNode consent page, and you approve. No token is created, and nothing secret is pasted into a file or a shell.
On the consent page you can untick permissions (sending, for example), choose a live or test connection, and set an hourly send cap. Afterwards the connection appears under Dashboard → MCP Server, and you can revoke it there at any time.
claude.ai and Claude Desktop
- Open Settings → Connectors and choose Add custom connector.
- Enter
https://mcp.callnode.io/mcpas the server URL and continue. Leave the client id and secret fields empty. - Claude opens the CallNode sign-in page. Log in if asked, review the numbers and permissions, and approve.
- Back in Claude, enable the connector in a chat.
ChatGPT
- Enable Developer mode under Settings → Connectors → Advanced, then choose Create.
- Enter
https://mcp.callnode.io/mcpas the MCP server URL and pick OAuth for authentication. No client id or secret is needed, because ChatGPT registers itself. - Approve on the CallNode sign-in page, then add the connector to a chat.
Claude Code
Either use .mcp.json from this repository in your project, or run this once:
claude mcp add --transport http callnode https://mcp.callnode.io/mcp
Inside Claude Code, type /mcp, pick callnode and choose Authenticate. Approve in the browser.
VS Code (Copilot agent mode)
- Save
.vscode/mcp.jsonin your workspace, then start the callnode server. VS Code opens the CallNode consent page; approve. - In Copilot Chat, choose Agent mode and tick the callnode tools.
Cursor
- Save
.cursor/mcp.jsonin your project, or the same entry in~/.cursor/mcp.json, then reload Cursor. - In Settings → MCP the server shows Needs login. Click it and approve in the browser.
Without a browser sign-in
For automations where a browser sign-in isn't possible, create a token connection in the dashboard. The snippets for each client are at https://callnode.io/docs/mcp#clients.
Tools
Each tool is bound to a permission you grant. A connection without that permission does not see the tool at all.
| Tool | Permission | What it does |
|---|---|---|
list_numbers |
numbers:read |
The enabled numbers, with what each can do and whether it has its own voice agent. |
get_number |
numbers:read |
One enabled number. Never webhook addresses, routing or credentials. |
list_calls |
calls:read |
Call records on the enabled numbers, newest first. No transcripts. |
get_call |
calls:read |
One call record, including how it ended. For calls placed through MCP: the summary, outcome and transcript. |
place_call |
calls:place |
Place a call. The CallNode voice agent runs it from your instructions, or the number's own voice webhook does. Off by default. |
list_messages |
messages:read |
SMS/MMS history on the enabled numbers. |
get_message |
messages:read |
One message, with its delivery status. |
send_message |
messages:send |
Send a text or picture message, to a number or to a Phone Book contact by name. |
list_phone_book |
phonebook:read |
Your Phone Book: your own lines, with their labels. |
add_phone_book_contact |
phonebook:manage |
Prepares an entry and returns a link. Only you can certify and save it. |
remove_phone_book_contact |
phonebook:manage |
Removes a Phone Book entry. |
get_balance |
account:read |
Your prepaid balance and auto-recharge settings. |
get_updates |
messages:read |
New inbound texts (and calls, when the connection can read calls) since the last check, with an optional wait of up to 20 seconds. |
send_message and place_call are marked as actions that reach a person and cannot be undone (destructiveHint), so clients that honour tool hints ask you before running them.
Safety and limits
- Numbers. Only the numbers you tick are visible, and no token can widen that list.
- Same rules as the API. Sends and calls go through the same rules as the CallNode API:
- opt-outs and STOP replies are honoured;
- texts and calls fall inside 8am–9pm in the recipient's local time, except your own certified Phone Book lines;
- sending numbers must be registered for messaging;
- calls need business verification, and do-not-call lists, destination restrictions and your concurrent-call limit apply;
- your balance must cover each send.
- Per-connection limits:
- 30 sends an hour by default, settable from 1 to 200;
- an identical text to the same recipient within 60 seconds is sent once;
- 10 calls an hour, and the same from/to pair within 60 seconds is never dialled twice;
- 120 tool calls a minute.
- The voice agent introduces itself as an AI assistant calling on behalf of your business and never claims to be human. It cannot transfer a call or take card details.
- Untrusted content. Message bodies and caller-supplied text reach the assistant marked as untrusted, so a text that tries to give it instructions reads as data.
- Activity log. Every tool call, allowed or refused, appears under Recent activity in your dashboard. Message contents are never stored there.
- Revoking. A revoked connection is refused on its next request. A sign-in lapses after 90 days without a fresh one.
- Test connections run every rule, then simulate the send or the call. Nothing leaves the platform and nothing is charged.
Pricing
The MCP server has no fee. Texts and calls are billed from your prepaid balance at your normal rates, and calls the CallNode voice agent runs add a per-minute rate for the voice. All rates are on https://callnode.io/pricing.
Support
- Help: support@callnode.io
- Security reports: security@callnode.io
- Privacy: https://callnode.io/privacy
- Terms: https://callnode.io/terms
- Security: https://callnode.io/security
Files in this repository
| File | For |
|---|---|
server.json |
The Official MCP Registry entry (io.callnode/mcp) |
.mcp.json |
Claude Code |
.vscode/mcp.json |
VS Code |
.cursor/mcp.json |
Cursor |
These files are released under the MIT License. The CallNode service itself is covered by the CallNode Terms.
Preguntas sobre CallNode MCP
¿Cómo agrego CallNode MCP a Claude Code?
Ejecuta claude mcp add --transport http callnode https://mcp.callnode.io/mcp en tu terminal. Añade --scope user para que esté disponible en todos los proyectos.
¿Cómo agrego CallNode MCP a Cursor?
Abre ~/.cursor/mcp.json y añade el servidor en mcpServers, usando la configuración de Cursor que se muestra en la sección de instalación de arriba.
¿Qué herramientas proporciona CallNode MCP?
Expone 13 herramientas, incluidas list_numbers, get_number, list_calls, get_call, place_call.
¿Cómo conecto CallNode con mi asistente de IA?
Debes proporcionar la URL del servidor a tu cliente, lo cual te redirigirá a una página de consentimiento de CallNode para aprobar los permisos y seleccionar números de teléfono específicos.
¿Tiene algún costo el uso del MCP server?
El MCP server en sí no tiene un cargo adicional, pero los mensajes de texto y las llamadas se cobran de tu saldo prepago de CallNode a las tarifas normales.
¿Puede el asistente de IA realizar llamadas telefónicas?
Sí, una vez que la función de llamadas esté activada, el asistente puede realizar llamadas que serán gestionadas por el agente de voz de CallNode.